Posts by emosim

OpenPli 4.0 IPTV by MastaG / Japhar Team with 1300 FREE IPTV Channels and with GStreamer 1.9.0.1b (May 6th 2016)

Changes:

- Latest gstreamer 1.9.0.1 snapshot based on recipes from christophecvr:
* Proper fix for HLS segfault on stop
* Re-enable the rtmp seeking and potential segfault fix
* gstreamer1.0-libav is now built against system ffmpeg instead (this differs from chris recipes) *
* dvbmediasink patches for Vu Solo 4K, hd1265 and hd1500 from oe-alliance
- FFMpeg updated to 3.0.2 and is now installed by default *
- Backports to enigma2 for sh4 (mainly servicemp3.cpp related)
- Fix EPG on sh4 receivers
- exteplayer3 is now installed by default, thank you mx3L and samsamsam *
- gstplayer is now installed by default, thank you mx3L and samsamsam
- Mediatomb is now in the feeds
- MediaPlayer2 is now installed by default, thank you mx3L
- SubsSupport (for MediaPlayer2) is now installed by default, thank you mx3L
- No more russian tuxtxt
- Its now possible to set the debug level again in the UI-settings menu, thank you christophecvr
- Latest enigma2 changes, thank you OpenPLi
- latest openpli-oe-core changes, thank you OpenPLi
- ServiceApp, thank you mx3L !!!

Known issues:
- On spark7162 (and 7111 probably as well) fragmented streams such as hls (m3u8) will skip and freeze a lot.
This happened sometime after the official Gstreamer 1.8.0 release and I didnt found the cause yet.
It is not related to the dvbmediasink since it doesnt happen on mips receivers and the code in the dvbmediasink didnt change.
Configure your streams to play with exteplayer3 instead, read below.
- * On the 64MB Dreambox models (DM800HD, DM800Se and DM500HD) there is not enough space to ship ffmpeg.
This means that exteplayer3 and gstreamer1.0-libav arent installed as well because they depend on ffmpeg.
See my attached guide to copy over the root filesystem to a storage device.
- Some Dreambox remotes may behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well.
- DM800 first boot will take a while, please be patient. The next boot will be faster.

Thanks for the hard work from mx3L and samsamsam you can now play your IPTV streams with exteplayer3 or gstplayer instead of the default dvbmediasink.
Especially using exteplayer3 will give much better performance on playing HLS streams compared to gstreamer + dvbmediasink.
For example, playing DJING underground 720p never worked very well on my DM800HD and now it does

DM8000HD+ Japhar : https://mega.nz/#!oFEAxaCa!y2Y…3pT8PZRC5RCkQ8VNfKUuiHW88

OpenPli 4.0 IPTV by MastaG / Japhar Team with 1300 FREE IPTV Channels and with GStreamer 1.9.0.1b (May 6th 2016)

Changes:

- Latest gstreamer 1.9.0.1 snapshot based on recipes from christophecvr:
* Proper fix for HLS segfault on stop
* Re-enable the rtmp seeking and potential segfault fix
* gstreamer1.0-libav is now built against system ffmpeg instead (this differs from chris recipes) *
* dvbmediasink patches for Vu Solo 4K, hd1265 and hd1500 from oe-alliance
- FFMpeg updated to 3.0.2 and is now installed by default *
- Backports to enigma2 for sh4 (mainly servicemp3.cpp related)
- Fix EPG on sh4 receivers
- exteplayer3 is now installed by default, thank you mx3L and samsamsam *
- gstplayer is now installed by default, thank you mx3L and samsamsam
- Mediatomb is now in the feeds
- MediaPlayer2 is now installed by default, thank you mx3L
- SubsSupport (for MediaPlayer2) is now installed by default, thank you mx3L
- No more russian tuxtxt
- Its now possible to set the debug level again in the UI-settings menu, thank you christophecvr
- Latest enigma2 changes, thank you OpenPLi
- latest openpli-oe-core changes, thank you OpenPLi
- ServiceApp, thank you mx3L !!!

Known issues:
- On spark7162 (and 7111 probably as well) fragmented streams such as hls (m3u8) will skip and freeze a lot.
This happened sometime after the official Gstreamer 1.8.0 release and I didnt found the cause yet.
It is not related to the dvbmediasink since it doesnt happen on mips receivers and the code in the dvbmediasink didnt change.
Configure your streams to play with exteplayer3 instead, read below.
- * On the 64MB Dreambox models (DM800HD, DM800Se and DM500HD) there is not enough space to ship ffmpeg.
This means that exteplayer3 and gstreamer1.0-libav arent installed as well because they depend on ffmpeg.
See my attached guide to copy over the root filesystem to a storage device.
- Some Dreambox remotes may behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well.
- DM800 first boot will take a while, please be patient. The next boot will be faster.

Thanks for the hard work from mx3L and samsamsam you can now play your IPTV streams with exteplayer3 or gstplayer instead of the default dvbmediasink.
Especially using exteplayer3 will give much better performance on playing HLS streams compared to gstreamer + dvbmediasink.
For example, playing DJING underground 720p never worked very well on my DM800HD and now it does

DM800HD+ Japhar : https://mega.nz/#!5B81hYqB!x-X…P63u1nJit3nO2zXuFWsGMcBbA

OpenPli 4.0 IPTV by MastaG / Japhar Team with 1300 FREE IPTV Channels and with GStreamer 1.9.0.1b (May 6th 2016)

Changes:

- Latest gstreamer 1.9.0.1 snapshot based on recipes from christophecvr:
* Proper fix for HLS segfault on stop
* Re-enable the rtmp seeking and potential segfault fix
* gstreamer1.0-libav is now built against system ffmpeg instead (this differs from chris recipes) *
* dvbmediasink patches for Vu Solo 4K, hd1265 and hd1500 from oe-alliance
- FFMpeg updated to 3.0.2 and is now installed by default *
- Backports to enigma2 for sh4 (mainly servicemp3.cpp related)
- Fix EPG on sh4 receivers
- exteplayer3 is now installed by default, thank you mx3L and samsamsam *
- gstplayer is now installed by default, thank you mx3L and samsamsam
- Mediatomb is now in the feeds
- MediaPlayer2 is now installed by default, thank you mx3L
- SubsSupport (for MediaPlayer2) is now installed by default, thank you mx3L
- No more russian tuxtxt
- Its now possible to set the debug level again in the UI-settings menu, thank you christophecvr
- Latest enigma2 changes, thank you OpenPLi
- latest openpli-oe-core changes, thank you OpenPLi
- ServiceApp, thank you mx3L !!!

Known issues:
- On spark7162 (and 7111 probably as well) fragmented streams such as hls (m3u8) will skip and freeze a lot.
This happened sometime after the official Gstreamer 1.8.0 release and I didnt found the cause yet.
It is not related to the dvbmediasink since it doesnt happen on mips receivers and the code in the dvbmediasink didnt change.
Configure your streams to play with exteplayer3 instead, read below.
- * On the 64MB Dreambox models (DM800HD, DM800Se and DM500HD) there is not enough space to ship ffmpeg.
This means that exteplayer3 and gstreamer1.0-libav arent installed as well because they depend on ffmpeg.
See my attached guide to copy over the root filesystem to a storage device.
- Some Dreambox remotes may behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well.
- DM800 first boot will take a while, please be patient. The next boot will be faster.

Thanks for the hard work from mx3L and samsamsam you can now play your IPTV streams with exteplayer3 or gstplayer instead of the default dvbmediasink.
Especially using exteplayer3 will give much better performance on playing HLS streams compared to gstreamer + dvbmediasink.
For example, playing DJING underground 720p never worked very well on my DM800HD and now it does

DM500HD+ Japhar : https://mega.nz/#!9JtGwAAb!ePV…d0ATQCdkMva2PM2HgB-9gjxhI

OpenPli 4.0 IPTV by MastaG / Japhar Team with 1300 FREE IPTV Channels and with GStreamer 1.9.0.1b (May 6th 2016)

Changes:

- Latest gstreamer 1.9.0.1 snapshot based on recipes from christophecvr:
* Proper fix for HLS segfault on stop
* Re-enable the rtmp seeking and potential segfault fix
* gstreamer1.0-libav is now built against system ffmpeg instead (this differs from chris recipes) *
* dvbmediasink patches for Vu Solo 4K, hd1265 and hd1500 from oe-alliance
- FFMpeg updated to 3.0.2 and is now installed by default *
- Backports to enigma2 for sh4 (mainly servicemp3.cpp related)
- Fix EPG on sh4 receivers
- exteplayer3 is now installed by default, thank you mx3L and samsamsam *
- gstplayer is now installed by default, thank you mx3L and samsamsam
- Mediatomb is now in the feeds
- MediaPlayer2 is now installed by default, thank you mx3L
- SubsSupport (for MediaPlayer2) is now installed by default, thank you mx3L
- No more russian tuxtxt
- Its now possible to set the debug level again in the UI-settings menu, thank you christophecvr
- Latest enigma2 changes, thank you OpenPLi
- latest openpli-oe-core changes, thank you OpenPLi
- ServiceApp, thank you mx3L !!!

Known issues:
- On spark7162 (and 7111 probably as well) fragmented streams such as hls (m3u8) will skip and freeze a lot.
This happened sometime after the official Gstreamer 1.8.0 release and I didnt found the cause yet.
It is not related to the dvbmediasink since it doesnt happen on mips receivers and the code in the dvbmediasink didnt change.
Configure your streams to play with exteplayer3 instead, read below.
- * On the 64MB Dreambox models (DM800HD, DM800Se and DM500HD) there is not enough space to ship ffmpeg.
This means that exteplayer3 and gstreamer1.0-libav arent installed as well because they depend on ffmpeg.
See my attached guide to copy over the root filesystem to a storage device.
- Some Dreambox remotes may behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well.
- DM800 first boot will take a while, please be patient. The next boot will be faster.

Thanks for the hard work from mx3L and samsamsam you can now play your IPTV streams with exteplayer3 or gstplayer instead of the default dvbmediasink.
Especially using exteplayer3 will give much better performance on playing HLS streams compared to gstreamer + dvbmediasink.
For example, playing DJING underground 720p never worked very well on my DM800HD and now it does

DM800HD+ Japhar : https://mega.nz/#!5B81hYqB!x-X…P63u1nJit3nO2zXuFWsGMcBbA
DM500HD+ Japhar : https://mega.nz/#!9JtGwAAb!ePV…d0ATQCdkMva2PM2HgB-9gjxhI
DM800HDse+ Japhar : https://mega.nz/#!UcMSASTA!U-d…inJdiXgeQrhD2-q1Nzp0XeawA
DM8000HD+ Japhar : https://mega.nz/#!oFEAxaCa!y2Y…3pT8PZRC5RCkQ8VNfKUuiHW88

OpenPli 4.0 IPTV by MastaG / Japhar Team with 1300 FREE IPTV Channels and with GStreamer 1.9.0.1b (May 6th 2016)

Changes:

- Latest gstreamer 1.9.0.1 snapshot based on recipes from christophecvr:
* Proper fix for HLS segfault on stop
* Re-enable the rtmp seeking and potential segfault fix
* gstreamer1.0-libav is now built against system ffmpeg instead (this differs from chris recipes) *
* dvbmediasink patches for Vu Solo 4K, hd1265 and hd1500 from oe-alliance
- FFMpeg updated to 3.0.2 and is now installed by default *
- Backports to enigma2 for sh4 (mainly servicemp3.cpp related)
- Fix EPG on sh4 receivers
- exteplayer3 is now installed by default, thank you mx3L and samsamsam *
- gstplayer is now installed by default, thank you mx3L and samsamsam
- Mediatomb is now in the feeds
- MediaPlayer2 is now installed by default, thank you mx3L
- SubsSupport (for MediaPlayer2) is now installed by default, thank you mx3L
- No more russian tuxtxt
- Its now possible to set the debug level again in the UI-settings menu, thank you christophecvr
- Latest enigma2 changes, thank you OpenPLi
- latest openpli-oe-core changes, thank you OpenPLi
- ServiceApp, thank you mx3L !!!

Known issues:
- On spark7162 (and 7111 probably as well) fragmented streams such as hls (m3u8) will skip and freeze a lot.
This happened sometime after the official Gstreamer 1.8.0 release and I didnt found the cause yet.
It is not related to the dvbmediasink since it doesnt happen on mips receivers and the code in the dvbmediasink didnt change.
Configure your streams to play with exteplayer3 instead, read below.
- * On the 64MB Dreambox models (DM800HD, DM800Se and DM500HD) there is not enough space to ship ffmpeg.
This means that exteplayer3 and gstreamer1.0-libav arent installed as well because they depend on ffmpeg.
See my attached guide to copy over the root filesystem to a storage device.
- Some Dreambox remotes may behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well.
- DM800 first boot will take a while, please be patient. The next boot will be faster.

Thanks for the hard work from mx3L and samsamsam you can now play your IPTV streams with exteplayer3 or gstplayer instead of the default dvbmediasink.
Especially using exteplayer3 will give much better performance on playing HLS streams compared to gstreamer + dvbmediasink.
For example, playing DJING underground 720p never worked very well on my DM800HD and now it does

DM800HDse+ Japhar : https://mega.nz/#!UcMSASTA!U-d…inJdiXgeQrhD2-q1Nzp0XeawA

OpenPli 4.0 IPTV by MastaG / Japhar Team with 1200 FREE IPTV Channels and with GStreamer 1.9.0.1 (April 15th 2016)

Changes:

- New gstreamer 1.9.0.1 recipes based on christophecvr's github (small changes for PLi4)
- Upgrade glib2.0 and some other components like gobject-introspection to satisfy the new gstreamer recipes
- gstreamer1.0-libav is built using it's minimal libav with only support for wma (thank you chris)
It's pre-installed on all receivers except for the ones with only 64MB of flash (dm800/800se/500hd)
- Full ffmpeg 3.0.1 package is in the feeds for use with IPTV Player's exteplayer3 (thx to Taapat for the original bbappend)
Login with telnet and issue: opkg update && opkg install ffmpeg
- Latest openpli-oe-core changes
- Latest enigma2 changes
- spark: libeplayer3 is pre-installed now (also in the feeds) for movie players with support for this library
Note: servicemp3 still uses gstreamer
- spark: some OpenPLi enigma2 backports (since Taapat doesn't maintain his enigma2 branch anymore)
The servicemp3 memleak patch has been applied with some other patches/commits I found useful
- spark: don't force async mode on the dvbaudiosink anymore, it's now the same as all other receivers again
- Add Vu+ Solo 2 Lonrisun V4 (v1 and v2) images + feed

DM800HD+ MEGA Japhar : https://mega.nz/#!hBU3xQiR!G6F…GkHf0bvKVLMufhENAJkwlo9Tw
DM800HD+ DataFileHost Japhar : DataFileHost : https://www.datafilehost.com/d/3325c880

OpenPli 4.0 IPTV by MastaG / Japhar Team with 1200 FREE IPTV Channels and with GStreamer 1.9.0.1 (April 15th 2016)

Changes:

- New gstreamer 1.9.0.1 recipes based on christophecvr's github (small changes for PLi4)
- Upgrade glib2.0 and some other components like gobject-introspection to satisfy the new gstreamer recipes
- gstreamer1.0-libav is built using it's minimal libav with only support for wma (thank you chris)
It's pre-installed on all receivers except for the ones with only 64MB of flash (dm800/800se/500hd)
- Full ffmpeg 3.0.1 package is in the feeds for use with IPTV Player's exteplayer3 (thx to Taapat for the original bbappend)
Login with telnet and issue: opkg update && opkg install ffmpeg
- Latest openpli-oe-core changes
- Latest enigma2 changes
- spark: libeplayer3 is pre-installed now (also in the feeds) for movie players with support for this library
Note: servicemp3 still uses gstreamer
- spark: some OpenPLi enigma2 backports (since Taapat doesn't maintain his enigma2 branch anymore)
The servicemp3 memleak patch has been applied with some other patches/commits I found useful
- spark: don't force async mode on the dvbaudiosink anymore, it's now the same as all other receivers again
- Add Vu+ Solo 2 Lonrisun V4 (v1 and v2) images + feed

Quote

DM8000HD+ : https://mega.nz/#!NtRDVY4S!lgh…Mjs5ivnaa-g3mGLiVRvMs3G28
DM500HD+ : https://mega.nz/#!ZwB3wTqI!Jjy…khnQYjfkNRzTSerbJrtZW8BxY
DM800HD+ : https://mega.nz/#!Fko21CAI!Z5w…fEjiu5Vv6Veqxc7yObb4j1IUk
DM800HDse+ : https://mega.nz/#!AwhlABgI!47L…vBMCAKEavrTiTBmgGQhBiK3jU

OpenPli 4.0 IPTV by MastaG / Japhar Team with 1200 FREE IPTV Channels and with GStreamer 1.9.0.1 (April 15th 2016)

Changes:

- New gstreamer 1.9.0.1 recipes based on christophecvr's github (small changes for PLi4)
- Upgrade glib2.0 and some other components like gobject-introspection to satisfy the new gstreamer recipes
- gstreamer1.0-libav is built using it's minimal libav with only support for wma (thank you chris)
It's pre-installed on all receivers except for the ones with only 64MB of flash (dm800/800se/500hd)
- Full ffmpeg 3.0.1 package is in the feeds for use with IPTV Player's exteplayer3 (thx to Taapat for the original bbappend)
Login with telnet and issue: opkg update && opkg install ffmpeg
- Latest openpli-oe-core changes
- Latest enigma2 changes
- spark: libeplayer3 is pre-installed now (also in the feeds) for movie players with support for this library
Note: servicemp3 still uses gstreamer
- spark: some OpenPLi enigma2 backports (since Taapat doesn't maintain his enigma2 branch anymore)
The servicemp3 memleak patch has been applied with some other patches/commits I found useful
- spark: don't force async mode on the dvbaudiosink anymore, it's now the same as all other receivers again
- Add Vu+ Solo 2 Lonrisun V4 (v1 and v2) images + feed

Quote

DM8000HD+ : https://mega.nz/#!NtRDVY4S!lgh…Mjs5ivnaa-g3mGLiVRvMs3G28
DM500HD+ : https://mega.nz/#!ZwB3wTqI!Jjy…khnQYjfkNRzTSerbJrtZW8BxY
DM800HD+ : https://mega.nz/#!Fko21CAI!Z5w…fEjiu5Vv6Veqxc7yObb4j1IUk
DM800HDse+ : https://mega.nz/#!AwhlABgI!47L…vBMCAKEavrTiTBmgGQhBiK3jU

VU+ Solo Ferrari V3 : https://mega.nz/#!Y4RTFQpI!_v8…mJeSExWYBZhiJGO3kU90JXjFY
VU+ Duo Ferrari V3 : https://mega.nz/#!ppxzjKpB!_dw…e0w7yOVy-wqDHE3A1JkNpTuFo
VU+ Uno Ferrari V3 : https://mega.nz/#!IoY2lT7A!5Q-…fO2jjZ3qXD4hiV5TcQrdIUuLA

VU+ Solo2 Lonrisun V1 : https://mega.nz/#!49onCbrL!eq0…gIJsT3QhW9i7xkrwfK4OadW3Y
VU+ Solo2 Lonrisun V4(1) : https://mega.nz/#!txIyjJwT!Y_z…d0Ih6DB2j9E6VA90fAUlVihog
VU+ Solo2 Lonrisun V4(2) : https://mega.nz/#!4og1FKaI!Ecb…ePTdg0IozFB0_19olCzRj2blU

Display More

OpenPli 4.0 IPTV by MastaG / Japhar Team with 1200 FREE IPTV Channels and with GStreamer 1.9.0.1 (April 15th 2016)

Changes:

- New gstreamer 1.9.0.1 recipes based on christophecvr's github (small changes for PLi4)
- Upgrade glib2.0 and some other components like gobject-introspection to satisfy the new gstreamer recipes
- gstreamer1.0-libav is built using it's minimal libav with only support for wma (thank you chris)
It's pre-installed on all receivers except for the ones with only 64MB of flash (dm800/800se/500hd)
- Full ffmpeg 3.0.1 package is in the feeds for use with IPTV Player's exteplayer3 (thx to Taapat for the original bbappend)
Login with telnet and issue: opkg update && opkg install ffmpeg
- Latest openpli-oe-core changes
- Latest enigma2 changes
- spark: libeplayer3 is pre-installed now (also in the feeds) for movie players with support for this library
Note: servicemp3 still uses gstreamer
- spark: some OpenPLi enigma2 backports (since Taapat doesn't maintain his enigma2 branch anymore)
The servicemp3 memleak patch has been applied with some other patches/commits I found useful
- spark: don't force async mode on the dvbaudiosink anymore, it's now the same as all other receivers again
- Add Vu+ Solo 2 Lonrisun V4 (v1 and v2) images + feed

https://mega.nz/#!NtRDVY4S!lghmCsrxJNmt_gwLTuMjs5ivnaa-g3mGLiVRvMs3G28

OpenPli 4.0 IPTV by MastaG / Japhar Team with 1200 FREE IPTV Channels and with GStreamer 1.9.0.1 (April 15th 2016)

Changes:

- New gstreamer 1.9.0.1 recipes based on christophecvr's github (small changes for PLi4)
- Upgrade glib2.0 and some other components like gobject-introspection to satisfy the new gstreamer recipes
- gstreamer1.0-libav is built using it's minimal libav with only support for wma (thank you chris)
It's pre-installed on all receivers except for the ones with only 64MB of flash (dm800/800se/500hd)
- Full ffmpeg 3.0.1 package is in the feeds for use with IPTV Player's exteplayer3 (thx to Taapat for the original bbappend)
Login with telnet and issue: opkg update && opkg install ffmpeg
- Latest openpli-oe-core changes
- Latest enigma2 changes
- spark: libeplayer3 is pre-installed now (also in the feeds) for movie players with support for this library
Note: servicemp3 still uses gstreamer
- spark: some OpenPLi enigma2 backports (since Taapat doesn't maintain his enigma2 branch anymore)
The servicemp3 memleak patch has been applied with some other patches/commits I found useful
- spark: don't force async mode on the dvbaudiosink anymore, it's now the same as all other receivers again
- Add Vu+ Solo 2 Lonrisun V4 (v1 and v2) images + feed

DM800HD+ : https://mega.nz/#!Fko21CAI!Z5w…fEjiu5Vv6Veqxc7yObb4j1IUk

OpenPli 4.0 IPTV by MastaG / Japhar Team with 1200 FREE IPTV Channels and with GStreamer 1.9.0.1 (April 15th 2016)

Changes:

- New gstreamer 1.9.0.1 recipes based on christophecvr's github (small changes for PLi4)
- Upgrade glib2.0 and some other components like gobject-introspection to satisfy the new gstreamer recipes
- gstreamer1.0-libav is built using it's minimal libav with only support for wma (thank you chris)
It's pre-installed on all receivers except for the ones with only 64MB of flash (dm800/800se/500hd)
- Full ffmpeg 3.0.1 package is in the feeds for use with IPTV Player's exteplayer3 (thx to Taapat for the original bbappend)
Login with telnet and issue: opkg update && opkg install ffmpeg
- Latest openpli-oe-core changes
- Latest enigma2 changes
- spark: libeplayer3 is pre-installed now (also in the feeds) for movie players with support for this library
Note: servicemp3 still uses gstreamer
- spark: some OpenPLi enigma2 backports (since Taapat doesn't maintain his enigma2 branch anymore)
The servicemp3 memleak patch has been applied with some other patches/commits I found useful
- spark: don't force async mode on the dvbaudiosink anymore, it's now the same as all other receivers again
- Add Vu+ Solo 2 Lonrisun V4 (v1 and v2) images + feed

DM500HD+ : https://mega.nz/#!ZwB3wTqI!Jjy…khnQYjfkNRzTSerbJrtZW8BxY

OpenPli 4.0 IPTV by MastaG / Japhar Team with 1200 FREE IPTV Channels and with GStreamer 1.9.0.1 (April 15th 2016)

Changes:

- New gstreamer 1.9.0.1 recipes based on christophecvr's github (small changes for PLi4)
- Upgrade glib2.0 and some other components like gobject-introspection to satisfy the new gstreamer recipes
- gstreamer1.0-libav is built using it's minimal libav with only support for wma (thank you chris)
It's pre-installed on all receivers except for the ones with only 64MB of flash (dm800/800se/500hd)
- Full ffmpeg 3.0.1 package is in the feeds for use with IPTV Player's exteplayer3 (thx to Taapat for the original bbappend)
Login with telnet and issue: opkg update && opkg install ffmpeg
- Latest openpli-oe-core changes
- Latest enigma2 changes
- spark: libeplayer3 is pre-installed now (also in the feeds) for movie players with support for this library
Note: servicemp3 still uses gstreamer
- spark: some OpenPLi enigma2 backports (since Taapat doesn't maintain his enigma2 branch anymore)
The servicemp3 memleak patch has been applied with some other patches/commits I found useful
- spark: don't force async mode on the dvbaudiosink anymore, it's now the same as all other receivers again
- Add Vu+ Solo 2 Lonrisun V4 (v1 and v2) images + feed

DM800HDse+ : https://mega.nz/#!AwhlABgI!47L…vBMCAKEavrTiTBmgGQhBiK3jU

OpenPLi 4.0 IPTV GStreamer 1.8.0 by MastaG (v16)

Changes:
- Gstreamer 1.8.0 stable release
- New PLi spring logo
- Upgrade OpenVPN to 2.3.8
- Upgrade OpenSSH to 7.1p2
- Upgrade OpenSSL to 1.0.2g
- Patched and bumped Python due to OpenSSL not supporting SSLv3 anymore
- Upgrade Japhar-IPTV list to 1.6
- Upgrade rtmpdump from oe-alliance and let it provide librtmp as well
- Upgrade ffmpeg to 3.0.1
- Patch for dvbmediasink from mx3L for writing PTS on every PES header
This could possible fix some m3u8 streams freezing
- Removed the patch for dvbmediasink which should fix seeking in some mp4 streams
Since I couldn't reproduce the problem
- Rewrote Dreambox kernel recipes which should fix certain models not booting
- Fixed CrossEPG
- Fixed very large Packages.gz on the server
- Merged latest openpli-oe-core changes
- Merged latest OpenPLi enigma2 changes
- Upgrade oscam to rev 11225 and applied joeuser's latest tryfix oscam-emu patch
Emulating PowerVU should now work for multiple pids
- Lots of stuff I forgot...

https://mega.nz/#!NR0hHKhT!fX5cI-pgR3t25JXxhQenUmPRqA6PCkxX59yZW9wVG4

OpenPLi 4.0 IPTV GStreamer 1.8.0 by MastaG (v16)

Changes:
- Gstreamer 1.8.0 stable release
- New PLi spring logo
- Upgrade OpenVPN to 2.3.8
- Upgrade OpenSSH to 7.1p2
- Upgrade OpenSSL to 1.0.2g
- Patched and bumped Python due to OpenSSL not supporting SSLv3 anymore
- Upgrade Japhar-IPTV list to 1.6
- Upgrade rtmpdump from oe-alliance and let it provide librtmp as well
- Upgrade ffmpeg to 3.0.1
- Patch for dvbmediasink from mx3L for writing PTS on every PES header
This could possible fix some m3u8 streams freezing
- Removed the patch for dvbmediasink which should fix seeking in some mp4 streams
Since I couldn't reproduce the problem
- Rewrote Dreambox kernel recipes which should fix certain models not booting
- Fixed CrossEPG
- Fixed very large Packages.gz on the server
- Merged latest openpli-oe-core changes
- Merged latest OpenPLi enigma2 changes
- Upgrade oscam to rev 11225 and applied joeuser's latest tryfix oscam-emu patch
Emulating PowerVU should now work for multiple pids
- Lots of stuff I forgot...

DM800HDse+ : https://mega.nz/#!MENwRaDb!AsZ…BzZbsVfuXBhxNqWFWFnzz0gLA

Changes since last release:
- gstreamer upgraded to 1.7.90 (nearing the final 1.8 release)
- ffmpeg updated to 3.0
- gstreamer1.0-libav is now build against ffmpeg (thx to Taapat).
- a patch from mx3L for servicemp3 that should speed up IPTV zapping
- a second patch from mv3L for servicemp3 that should fix a possible GSOD when switching audio tracks
- a third patch from mx3L for the dvbmediasink that should fix a possible GSOD on seeking in mp4 streams
- support for bluray isos by Taapat
- remote controls should now have their media-button working
- added X Solo Mini 3 build
- New vermagic magics, you should be able to load any kernelmodule again.
- patch by christophecvr for setting the debug level in Menu -> Settings -> User-interface settings.

Note :
The patch for setting the debug level is very important since it fixes many possible IPTV issues on slower receivers like the DM800.
Its highly recommended to set it level 0 :)

- MEGA DM8000HD+ Japhar SSL84J :
https://mega.nz/#!dENQEIpT!Kj1…doqQWLsFdBVozoxsHnm4tjoNE
- MEGA DM800HDse+ Japhar SSL84J :
https://mega.nz/#!FRMRAAhA!UVp…oS1OOto-sgru0KvEFNbgNMqRg
- MEGA DM800HD+ Japhar SSL84J :
https://mega.nz/#!FZVQnTJT!BoU…mLjf9VTuvf_ZBnqT5w-TFFIZE
- MEGA DM500HD+ Japhar SSL84J :
https://mega.nz/#!BFMkkS7S!g9B…ZXOb4cBcafy3vPuBljxXwnM0s

- MEGA VU+ Solo Ferrari V3 :
https://mega.nz/#!Y14zgCKD!QCk…jZohfbjnOpjWwF1OmtmIUfQwc
- MEGA VU+ Duo Ferrari V3 :
https://mega.nz/#!p14n2LjC!a_V…wz7RVOU_hkDSzcQd4IshxMPsU
- MEGA VU+ Uno Ferrari V3 :
https://mega.nz/#!g9R3yR5I!LRc…7cTWJMXvf3PDIpNqV_8_5CSEg
- MEGA VU+ Solo2 Lonrisun V1 :
https://mega.nz/#!95RUHLhJ!t59…5aFb-527-0Fvv8HKwXacmFimM

Changes since last release:
- gstreamer upgraded to 1.7.90 (nearing the final 1.8 release)
- ffmpeg updated to 3.0
- gstreamer1.0-libav is now build against ffmpeg (thx to Taapat).
- a patch from mx3L for servicemp3 that should speed up IPTV zapping
- a second patch from mv3L for servicemp3 that should fix a possible GSOD when switching audio tracks
- a third patch from mx3L for the dvbmediasink that should fix a possible GSOD on seeking in mp4 streams
- support for bluray isos by Taapat
- remote controls should now have their media-button working
- added X Solo Mini 3 build
- New vermagic magics, you should be able to load any kernelmodule again.
- patch by christophecvr for setting the debug level in Menu -> Settings -> User-interface settings.

Note :
The patch for setting the debug level is very important since it fixes many possible IPTV issues on slower receivers like the DM800.
Its highly recommended to set it level 0 :)

- MEGA DM8000HD+ Japhar SSL84J :
https://mega.nz/#!dENQEIpT!Kj1…doqQWLsFdBVozoxsHnm4tjoNE
- MEGA DM800HDse+ Japhar SSL84J :
https://mega.nz/#!FRMRAAhA!UVp…oS1OOto-sgru0KvEFNbgNMqRg
- MEGA DM800HD+ Japhar SSL84J :
https://mega.nz/#!FZVQnTJT!BoU…mLjf9VTuvf_ZBnqT5w-TFFIZE
- MEGA DM500HD+ Japhar SSL84J :
https://mega.nz/#!BFMkkS7S!g9B…ZXOb4cBcafy3vPuBljxXwnM0s

Changes since last release:
- gstreamer upgraded to 1.7.90 (nearing the final 1.8 release)
- ffmpeg updated to 3.0
- gstreamer1.0-libav is now build against ffmpeg (thx to Taapat).
- a patch from mx3L for servicemp3 that should speed up IPTV zapping
- a second patch from mv3L for servicemp3 that should fix a possible GSOD when switching audio tracks
- a third patch from mx3L for the dvbmediasink that should fix a possible GSOD on seeking in mp4 streams
- support for bluray isos by Taapat
- remote controls should now have their media-button working
- added X Solo Mini 3 build
- New vermagic magics, you should be able to load any kernelmodule again.
- patch by christophecvr for setting the debug level in Menu -> Settings -> User-interface settings.

Note :
The patch for setting the debug level is very important since it fixes many possible IPTV issues on slower receivers like the DM800.
Its highly recommended to set it level 0 :)

- MEGA DM800HD+ Japhar SSL84J :
https://mega.nz/#!FZVQnTJT!BoU…mLjf9VTuvf_ZBnqT5w-TFFIZE

Changes since last release:
- gstreamer upgraded to 1.7.90 (nearing the final 1.8 release)
- ffmpeg updated to 3.0
- gstreamer1.0-libav is now build against ffmpeg (thx to Taapat).
- a patch from mx3L for servicemp3 that should speed up IPTV zapping
- a second patch from mv3L for servicemp3 that should fix a possible GSOD when switching audio tracks
- a third patch from mx3L for the dvbmediasink that should fix a possible GSOD on seeking in mp4 streams
- support for bluray isos by Taapat
- remote controls should now have their media-button working
- added X Solo Mini 3 build
- New vermagic magics, you should be able to load any kernelmodule again.
- patch by christophecvr for setting the debug level in Menu -> Settings -> User-interface settings.

Note :
The patch for setting the debug level is very important since it fixes many possible IPTV issues on slower receivers like the DM800.
Its highly recommended to set it level 0 :)

- MEGA DM8000HD+ :
https://mega.nz/#!dENQEIpT!Kj1…doqQWLsFdBVozoxsHnm4tjoNE
- MEGA DM800HDse+ :
https://mega.nz/#!FRMRAAhA!UVp…oS1OOto-sgru0KvEFNbgNMqRg
- MEGA DM800HD+ :
https://mega.nz/#!FZVQnTJT!BoU…mLjf9VTuvf_ZBnqT5w-TFFIZE
- MEGA DM500HD+ :
https://mega.nz/#!BFMkkS7S!g9B…ZXOb4cBcafy3vPuBljxXwnM0s

- MEGA VU+ Solo Ferrari V3 :
https://mega.nz/#!Y14zgCKD!QCk…jZohfbjnOpjWwF1OmtmIUfQwc
- MEGA VU+ Duo Ferrari V3 :
https://mega.nz/#!p14n2LjC!a_V…wz7RVOU_hkDSzcQd4IshxMPsU
- MEGA VU+ Uno Ferrari V3 :
https://mega.nz/#!g9R3yR5I!LRc…7cTWJMXvf3PDIpNqV_8_5CSEg
- MEGA VU+ Solo2 Lonrisun V1 :
https://mega.nz/#!95RUHLhJ!t59…5aFb-527-0Fvv8HKwXacmFimM

DM800HD with HD Channel in 1080p,

Enjoy ;o)

DM800HD, OpenPLi 4.0 IPTV from MastaG and 1080p !!!

;o)