Posts by keongjb

Your new white card pair code with original decoder. Oscam cannot decode the code.Until now oscam cannot decode any pairing code at nds system.

The new decoder 09ac beyond Hd got a software running code with the original card reader. Please sponsor the new decoder to software engineer convert the machine code at the chip in decoder to software code.But this convert if you have a machine software.If you can find the softcode from the machine code,please send the info and data to me.I will help you crack the code.Thanks..

The new 09ac was pairing code with the new decoder.All oscam cannot decoder the code now.Oscam can read the card,but want decoder another code at new decoder.So you must find the code at the new original decoder.This is not call married card,is pairing code with the new decoder.

I have card need CAMKEY and CAMDATA with caid 0639 and ATR: 3B 9F 11 40 60 49 52 44 45 54 4F 20 41 43 53 20 56 35 2E 38

How to get CAMKEY and CAMDATA to put in on OScam ?

2012/10/18 08:52:42 8351020 r astro1 [smartreader] Reader initialized (device=Serial:Reader 194, detect=cd, mhz=600, cardmhz=600)
2012/10/18 08:52:43 8351020 r astro1 [smartreader] card detected
2012/10/18 08:52:44 8351020 r astro1 [smartreader] ATR: 3B 9F 11 40 60 49 52 44 45 54 4F 20 41 43 53 20 56 35 2E 38
2012/10/18 08:52:45 8351020 r astro1 [smartreader] Maximum frequency for this card is formally 5 Mhz, clocking it to 6.00 Mhz
2012/10/18 08:52:46 8351020 r astro1 [smartreader] Hist. Bytes: I***** ACS V5.8
2012/10/18 08:52:46 8351020 r astro1 [smartreader] detect i***** card
2012/10/18 08:52:46 8351020 r astro1 [smartreader] WARNING: ACS57 card can require the CamKey from config
2012/10/18 08:52:46 8351020 r astro1 [smartreader] caid: 0639, acs: 0.05, country code: IN
2012/10/18 08:52:46 8351020 r astro1 [smartreader] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2012/10/18 08:52:46 8351020 r astro1 [smartreader] active providers: 4 (09f427,ffffff,ffffff,ffffff)
2012/10/18 08:52:46 8351020 r astro1 [smartreader] found card system i*****
2012/10/18 08:52:46 8351020 r astro1 [i*****] entitlements for provider: 1, id: 09F427
2012/10/18 08:52:46 8351020 r astro1 [i*****] chid: 0004, date: 2010/05/19 - 2010/06/18
2012/10/18 08:52:46 8351020 r astro1 [i*****] chid: 0024, date: 2010/05/19 - 2010/06/18
2012/10/18 08:52:46 8351020 r astro1 [i*****] chid: 0042, date: 2010/05/19 - 2010/06/18
2012/10/18 08:52:46 8351020 r astro1 [i*****] chid: 0044, date: 2010/05/19 - 2010/06/18
2012/10/18 08:52:46 8351020 r astro1 [i*****] chid: 0045, date: 2010/05/19 - 2010/06/18
2012/10/18 08:52:46 8351020 r astro1 [i*****] chid: 0046, date: 2010/05/19 - 2010/06/18
2012/10/18 08:52:46 8351020 r astro1 [i*****] chid: 0053, date: 2010/05/19 - 2010/06/18
2012/10/18 08:52:46 8351020 r astro1 [i*****] chid: 0054, date: 2010/05/19 - 2010/06/18
2012/10/18 08:52:46 8351020 r astro1 [i*****] chid: 005A, date: 2010/05/07 - 2010/06/06
2012/10/18 08:52:46 8351020 r astro1 [i*****] chid: 0121, date: 2010/05/07 - 2010/06/06
2012/10/18 08:52:46 8351020 r astro1 [i*****] chid: 0142, date: 2010/05/07 - 2010/06/06
2012/10/18 08:52:46 8351020 r astro1 [i*****] chid: 014E, date: 2010/05/07 - 2010/06/06
2012/10/18 08:52:46 8351020 r astro1 [i*****] chid: 7FFE, date: 2010/05/07 - 2010/06/06
2012/10/18 08:52:46 8351020 r astro1 [i*****] chid: 7FFD, date: 2010/05/19 - 2010/05/29
2012/10/18 08:52:46 8351020 r astro1 [i*****] chid: FFD8, date: 2010/04/20 - 2010/05/20
2012/10/18 08:52:47 8351020 r astro1 [i*****] ready for requests
2012/10/18 08:52:47 0 s init for all local cards done
2012/10/18 08:52:47 0 s anti cascading disabled
2012/10/18 08:52:47 8356708 c client connected to 10000 port
2012/10/18 08:52:47 8356708 c encrypted newcamd:10000-client 127.0.0.1 granted (user, au=auto (1 reader))
2012/10/18 08:52:47 8356708 c user user authenticated successfully (CCcam)
2012/10/18 08:52:47 8356708 c AU enabled for user user on reader astro1
2012/10/18 08:52:55 8351020 r astro1 [i*****] Maybe you don't have the entitlements for this channel
2012/10/18 08:52:55 8356708 c starting thread housekeeping lb stats
2012/10/18 08:52:55 8356708 c housekeeping lb stats thread started
2012/10/18 08:52:55 8356708 c user (0639&000000/000A/0004/3C:596C): not found (53 ms) by astro1
2012/10/18 08:52:55 8351020 r astro1 [i*****] Maybe you have a bad Cam Key set it from config file
2012/10/18 08:52:55 8356708 c user (0639&000000/0053/0004/3C:2801): not found (82 ms) by astro1
2012/10/18 08:52:55 8351020 r astro1 [i*****] Maybe you don't have the entitlements for this channel
2012/10/18 08:52:55 8356708 c user (0639&000000/0131/0004/3C:1EB1): not found (54 ms) by astro1
2012/10/18 08:52:55 8351020 r astro1 [i*****] Maybe you don't have the entitlements for this channel
2012/10/18 08:52:55 8356708 c user (0639&000000/0145/0004/3C:69F3): not found (53 ms) by astro1
2012/10/18 08:52:55 8351020 r astro1 [i*****] Maybe you don't have the entitlements for this channel
2012/10/18 08:52:55 8356708 c user (0639&000000/0174/0004/3C:12E5): not found (53 ms) by astro1
2012/10/18 08:52:55 8351020 r astro1 [i*****] Maybe you don't have the entitlements for this channel
2012/10/18 08:52:55 8356708 c user (0639&000000/0180/0004/3C:02BC): not found (55 ms) by astro1
2012/10/18 08:52:55 8351020 r astro1 [i*****] Maybe you don't have the entitlements for this channel
2012/10/18 08:52:55 8356708 c user (0639&000000/018A/0004/3C:B4C4): not found (53 ms) by astro1
2012/10/18 08:52:55 8351020 r astro1 [i*****] Maybe you don't have the entitlements for this channel
2012/10/18 08:52:55 8356708 c user (0639&000000/018B/0004/3C:35C3): not found (55 ms) by astro1

2012/05/11 15:10:27 8F5E210 r Using 0x82 as endpoint for smartreader hardware detection
2012/05/11 15:10:27 8F5E210 r Found smartreader device 001:004
2012/05/11 15:10:27 8F5E210 r reader astro1 initialized (device=001:004, detect=cd, mhz=686, cardmhz=357)
2012/05/11 15:10:28 8F5E210 r astro1 card detected
2012/05/11 15:10:31 8F5E210 r ATR: 3F FF 11 25 03 10 80 41 B0 06 69 FF 4A 50 70 00 00 41 5A 01 00 11
2012/05/11 15:10:31 8F5E210 r Maximum frequency for this card is formally 5 Mhz, clocking it to 6.86 Mhz
2012/05/11 15:10:33 8F5E210 r [videoguard2-reader] parental lock setting: FF FF 00 00
2012/05/11 15:10:33 8F5E210 r [videoguard2-reader] type: VideoGuard Astro Malaysia (09AC), caid: 09AC
2012/05/11 15:10:33 8F5E210 r [videoguard2-reader] serial: XXXXXXXX, BoxID: 001F1F1F, baseyear: 2004
2012/05/11 15:10:33 8F5E210 r [videoguard2-reader] ready for requests
2012/05/11 15:10:33 8F5E210 r found cardsystem videoguard2
2012/05/11 15:10:33 8F5E210 r [videoguard2-reader] astro1 card detected

This my cccam and oscam setting

oscam conf
[global]
logfile = stdout
netprio = 9
nice = -1
preferlocalcards = 1
lb_mode = 1
lb_savepath =

i use powered usb hub also ecm time 270ms.
Any different powered usb hub?
use smargo 1.4,same with u.
I try use the latest oscam 1.20-unstable_svn build 6692,ecm also 270ms.
What is the problem at my server?

use linux debian system,
smargo reader,oscam 1.10 build 6089
clock to 6.86mhz already.get 270ms,
what is ur server detail?Can get ecm 90ms?

Which card reader is read the nds card very good and can go to below ecm 150ms?
Use smargo can go to ecm 270ms only.The smargo card reader run 6.86mhz already.
Pls help me to reduce the ecm to below 150ms?

how change the omnikey cardreader settings?
Got any software to chnage the reader settings?
The omnikey workbench can see this card info only,my card is run 4.8mhz.
Can i change to 8mhz?
Any solution to change it?

hi!
I have new nds married card can't decode.
2010/12/21 16:17:32 30016290 s version=1.00-unstable_svn, build #4043, system=powerpc-tuxbox-linux, nice=9
2010/12/21 16:17:32 30016290 s client max. idle=120 sec, debug level=0
2010/12/21 16:17:32 30016290 s max. logsize=20 Kb
2010/12/21 16:17:32 30016290 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2010/12/21 16:17:32 30016290 s auth size=4800
2010/12/21 16:17:32 30016290 s Cannot open file "/var/tuxbox/config/oscam.services" (errno=2)
2010/12/21 16:17:32 30016290 s userdb reloaded: 0 accounts freed, 4 accounts loaded, 0 expired, 0 disabled
2010/12/21 16:17:32 30016290 s signal handling initialized (type=sysv)
2010/12/21 16:17:32 30016290 s can't open file "/var/tuxbox/config/oscam.srvid" (err=2), no service-id's loaded
2010/12/21 16:17:32 30016290 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2010/12/21 16:17:32 30016290 s can't open file "/var/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2010/12/21 16:17:32 30016290 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2) i***** guessing not loaded
2010/12/21 16:17:32 30016290 s monitor: initialized (fd=8, port=988, prio=1)
2010/12/21 16:17:32 30016290 s camd33: disabled
2010/12/21 16:17:32 30016290 s camd35: disabled
2010/12/21 16:17:32 30016290 s cs378x: disabled
2010/12/21 16:17:32 30016290 s newcamd: initialized (fd=9, port=10000, prio=1, crypted)
2010/12/21 16:17:32 30016290 s CAID: 09AC
2010/12/21 16:17:32 30016290 s provid #0: 000000
2010/12/21 16:17:32 30016290 s cccam: disabled
2010/12/21 16:17:32 30016290 s radegast: disabled
2010/12/21 16:17:32 30016290 s http thread started
2010/12/21 16:17:32 30016290 s creating thread for device /dev/sci0 slot 0
2010/12/21 16:17:32 30016290 s waiting for local card init
2010/12/21 16:17:32 30859B50 h HTTP Server listening on port 8888
2010/12/21 16:17:32 31059B50 r reader thread started (thread=31059B50, label=reader1, device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2010/12/21 16:17:32 31059B50 r reader1 card detected
2010/12/21 16:17:32 31059B50 r Extra delay for PPC box between reset and IO_Serial_Read for the ATR
2010/12/21 16:17:33 31059B50 r ATR: 3F FF 11 25 03 10 80 41 B0 06 69 FF 4A 50 70 00 00 41 5A 01 00 11
2010/12/21 16:17:34 31059B50 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2010/12/21 16:17:36 31059B50 r [videoguard2-reader] parental lock setting: FF FF 00 00
2010/12/21 16:17:36 31059B50 r [videoguard2-reader] type: VideoGuard Astro Malaysia (09AC), caid: 09AC
2010/12/21 16:17:36 31059B50 r [videoguard2-reader] serial: ********, BoxID:********, baseyear: 2004
2010/12/21 16:17:36 31059B50 r [videoguard2-reader] ready for requests
2010/12/21 16:17:36 31059B50 r found cardsystem
2010/12/21 16:17:36 31059B50 r [videoguard2-reader] reader1 card detected
2010/12/21 16:17:36 31059B50 r [videoguard2-reader] type: VideoGuard Astro Malaysia (09AC)
2010/12/21 16:17:36 31059B50 r [videoguard2-reader] tier: 0033, expiry date: 2011/02/16-00:01:00
2010/12/21 16:17:36 31059B50 r [videoguard2-reader] tier: 0035, expiry date: 2011/02/16-00:01:00
2010/12/21 16:17:36 31059B50 r [videoguard2-reader] tier: 0038, expiry date: 2011/02/16-00:01:00
2010/12/21 16:17:36 31059B50 r [videoguard2-reader] tier: 003a, expiry date: 2011/02/16-00:01:00
2010/12/21 16:17:37 31059B50 r [videoguard2-reader] tier: 003b, expiry date: 2011/02/16-00:01:00
2010/12/21 16:17:37 31059B50 r [videoguard2-reader] tier: 003e, expiry date: 2011/02/16-00:01:00
2010/12/21 16:17:37 31059B50 r [videoguard2-reader] tier: 003f, expiry date: 2011/02/16-00:01:00
2010/12/21 16:17:37 31059B50 r [videoguard2-reader] tier: 0066, expiry date: 2011/02/16-00:01:00
2010/12/21 16:17:37 31059B50 r [videoguard2-reader] tier: 00dd, expiry date: 2011/02/16-00:01:00
2010/12/21 16:17:37 31059B50 r [videoguard2-reader] tier: 00de, expiry date: 2011/02/16-00:01:00
2010/12/21 16:17:37 31059B50 r [videoguard2-reader] tier: 00e6, expiry date: 2011/02/16-00:01:00
2010/12/21 16:17:37 31059B50 r [videoguard2-reader] tier: 00e7, expiry date: 2011/02/16-00:01:00
2010/12/21 16:17:37 31059B50 r [videoguard2-reader] tier: 00ec, expiry date: 2011/02/16-00:01:00
2010/12/21 16:17:37 31059B50 r [videoguard2-reader] tier: 00f0, expiry date: 2011/02/16-00:01:00
2010/12/21 16:17:37 31059B50 r [videoguard2-reader] tier: 00f3, expiry date: 2011/02/16-00:01:00
2010/12/21 16:17:37 30016290 s init for all local cards done
2010/12/21 16:17:37 30016290 s anti cascading disabled
2010/12/21 16:17:37 31859B50 c plain dvbapi-client granted (user1, au=reader1)
2010/12/21 16:17:37 31859B50 c dvbapi: can't open priority file /var/tuxbox/config/oscam.dvbapi
2010/12/21 16:17:37 31859B50 c dvbapi: found pmt file /tmp/pmt.tmp
2010/12/21 16:17:37 31859B50 c dvbapi: found pmt file /tmp/pmt.tmp
2010/12/21 16:17:37 31859B50 c dvbapi: found pmt file /tmp/pmt.tmp
2010/12/21 16:17:37 31859B50 c dvbapi: [ADD PID 0] CAID: 09AC ECM_PID: 0C99 PROVID: 000000
2010/12/21 16:17:37 31859B50 c dvbapi: new program number: 4F60 (09AC:4F60 unknown)
2010/12/21 16:17:37 32059B50 c client connected to 10000 port
2010/12/21 16:17:37 32859B50 c client connected to 10000 port
2010/12/21 16:17:37 332FFB50 c client connected to 10000 port
2010/12/21 16:17:37 31859B50 c dvbapi: [ADD PID 0] CAID: 09AC ECM_PID: 0C99 PROVID: 000000
2010/12/21 16:17:37 31859B50 c dvbapi: [ADD PID 0] CAID: 09AC ECM_PID: 0C99 PROVID: 000000
2010/12/21 16:17:37 31859B50 c dvbapi: stoping demux for pmt file /tmp/pmt.tmp
2010/12/21 16:17:37 31859B50 c dvbapi: [ADD PID 1] CAID: 09AC ECM_PID: 0C99 PROVID: 000000
2010/12/21 16:17:37 31859B50 c dvbapi: new program number: 4F60 ()
2010/12/21 16:17:37 32859B50 c encrypted newcamd:10000-client 192.168.1.103 granted (29155s, au(auto)=0)
2010/12/21 16:17:37 32859B50 c user 29155s authenticated successfully (CCcam)
2010/12/21 16:17:37 32859B50 c AU disabled for user 29155s
2010/12/21 16:17:37 332FFB50 c encrypted newcamd:10000-client 192.168.1.103 granted (9150s, au(auto)=0)
2010/12/21 16:17:37 332FFB50 c user 9150s authenticated successfully (CCcam)
2010/12/21 16:17:37 332FFB50 c AU disabled for user 9150s
2010/12/21 16:17:37 32059B50 c encrypted newcamd:10000-client 192.168.1.103 granted (29160s, au(auto)=0)
2010/12/21 16:17:37 32059B50 c user 29160s authenticated successfully (CCcam)
2010/12/21 16:17:37 32059B50 c AU disabled for user 29160s
2010/12/21 16:17:38 31059B50 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2010/12/21 16:17:38 31859B50 c dvbapi: try pids again #1
2010/12/21 16:17:38 31859B50 c user1 (09AC&000000/4F60/69:3283): not found (271 ms) (of 1 avail 1)
2010/12/21 16:17:40 31859B50 c dvbapi: new program number: 4F60 (0000:4F60 unknown)
2010/12/21 16:17:43 31859B50 c loadbalancer: retrying reader reader1
2010/12/21 16:17:43 31859B50 c dvbapi: try pids again #2
2010/12/21 16:17:43 31859B50 c user1 (09AC&000000/4F60/69:3283): timeout (5032 ms) (of 0 avail 0)
2010/12/21 16:17:43 31059B50 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2010/12/21 16:17:43 31859B50 c dvbapi: try pids again #3
2010/12/21 16:17:43 31859B50 c dvbapi: can't decode channel
2010/12/21 16:17:43 31859B50 c user1 (09AC&000000/4F60/69:432A): not found (250 ms) (of 1 avail 1)
2010/12/21 16:17:43 31859B50 c dvbapi: can't decode channel
2010/12/21 16:17:43 31859B50 c user1 (09AC&000000/4F60/69:432A): not found (151 ms) (of 0 avail 0)
2010/12/21 16:17:43 31859B50 c dvbapi: can't decode channel
2010/12/21 16:17:43 31859B50 c user1 (09AC&000000/4F60/69:432A): not found (254 ms) (of 0 avail 0)

Everbody can help me to decode the all channel,just 1 channel can decode is Astro I-view channel only.

How to set the mhz of the omnikey cardreader?Smargo use srp_tools,but omnikey use what software to config the mhz?

Smargo cardreader can read the nds card to ECM time 90ms?
Everbody can help me to decreased the ECM time to 90ms?

Everbody can help me to decreased ecm time to 270ms at my linux debian? My system is 09ac.NOw ecm at 410ms.Can decreased to 270ms?
Use smargo reader now.