plz help my ubuntu ECM very high
ubuntu ECM very high
- moiz
- Thread is marked as Resolved.
There are 16 replies in this Thread which was already clicked 1,707 times. The last Post () by steve67474.
-
-
We need more info in order to help, tell us cams, readers used and post configs please.
-
Which card reader is read the nds card very good and can go to below ecm 150ms?
Use smargo can go to ecm 270ms only.The smargo card reader run 6.86mhz already.
Pls help me to reduce the ecm to below 150ms? -
I use this reader with Ubuntu, and i have 145 - 146 ecm.
-
I am using smargo 1.4 with powered hub and getting between 80 to 90 ms
-
Which card reader is read the nds card very good and can go to below ecm 150ms?
Use smargo can go to ecm 270ms only.The smargo card reader run 6.86mhz already.
Pls help me to reduce the ecm to below 150ms?Post ur configs m8 and details of oscam level plus ubuntu release more info the better as u should be able to get below 150ms as I deffo do
-
use linux debian system,
smargo reader,oscam 1.10 build 6089
clock to 6.86mhz already.get 270ms,
what is ur server detail?Can get ecm 90ms? -
Using the following....
OSCAM 1.20-unstable_svn build #6402
smargo 1.4
Ubuntu 11
powered usb hub
clock 4.8mhz -
i use powered usb hub also ecm time 270ms.
Any different powered usb hub?
use smargo 1.4,same with u.
I try use the latest oscam 1.20-unstable_svn build 6692,ecm also 270ms.
What is the problem at my server? -
here are mine..
2012/05/10 16:50:19 B7605AB8 c lounge (0963&000000/0FA1/6A:829C): found (91 ms) by ***_uk
2012/05/10 16:50:27 B7605AB8 c lounge (0963&000000/0FA1/6A:5C37): found (91 ms) by ***_uk
2012/05/10 16:50:35 B7605AB8 c lounge (0963&000000/0FA1/6A:76F2): found (92 ms) by ***_uk
2012/05/10 16:50:43 B7605AB8 c lounge (0963&000000/0FA1/6A:B661): found (91 ms) by ***_uk
2012/05/10 16:50:50 B7605AB8 c lounge (0963&000000/0FA1/6A:FB35): found (91 ms) by ***_uk
2012/05/10 16:50:58 B7605AB8 c lounge (0963&000000/0FA1/6A:DCF1): found (92 ms) by ***_uk
2012/05/10 16:51:06 B7605AB8 c lounge (0963&000000/0FA1/6A:A41A): found (91 ms) by ***_ukMaybe its your broadband m8 post your config files what are you using cccam newcamd? post oscam server file be sure to xxx out any info like boxkey
-
This my cccam and oscam setting
oscam conf
[global]
logfile = stdout
netprio = 9
nice = -1
preferlocalcards = 1
lb_mode = 1
lb_savepath = -
ok you are running thre smargo as a usb to serial device not a true usb device. This is my server config.
label=***_uk
description = smargo
protocol=SmartReader
device=001:005
In oscam go to the reader option and list usb devices you should see something like this...
USB Devices
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:04.1
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:04.0
Bus 001 Device 003: ID 1a40:0101 TERMINUS TECHNOLOGY INC. USB-2.0 4-Port HUB
iProduct 1 USB 2.0 Hub
iSerial 0
Bus 002 Device 002: ID 1ea7:0002
iProduct 1 2.4GHZ Keyboard & Mouse Combo
iSerial 0
Bus 001 Device 004: ID 1a40:0101 TERMINUS TECHNOLOGY INC. USB-2.0 4-Port HUB
iProduct 1 USB 2.0 Hub
iSerial 0
Bus 001 Device 005: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
iProduct 0
iSerial 3 Reader 224reconfigure your oscam server like mine but use the bus id and device id that yours lists
-
here are mine..
2012/05/10 16:50:19 B7605AB8 c lounge (0963&000000/0FA1/6A:829C): found (91 ms) by ***_uk
2012/05/10 16:50:27 B7605AB8 c lounge (0963&000000/0FA1/6A:5C37): found (91 ms) by ***_uk
2012/05/10 16:50:35 B7605AB8 c lounge (0963&000000/0FA1/6A:76F2): found (92 ms) by ***_uk
2012/05/10 16:50:43 B7605AB8 c lounge (0963&000000/0FA1/6A:B661): found (91 ms) by ***_uk
2012/05/10 16:50:50 B7605AB8 c lounge (0963&000000/0FA1/6A:FB35): found (91 ms) by ***_uk
2012/05/10 16:50:58 B7605AB8 c lounge (0963&000000/0FA1/6A:DCF1): found (92 ms) by ***_uk
2012/05/10 16:51:06 B7605AB8 c lounge (0963&000000/0FA1/6A:A41A): found (91 ms) by ***_ukMaybe its your broadband m8 post your config files what are you using cccam newcamd? post oscam server file be sure to xxx out any info like boxkey
These readings are from your server directly ! so they will be lower than the actual recievers times (Just to clarify) my server has the same times as you have posted but the reciever will report 0.154- 0.170 (in realtime) this is using Omnikey reader with powered USB hub.
hope this helps.
-
2012/05/11 15:10:27 8F5E210 r Using 0x82 as endpoint for smartreader hardware detection
2012/05/11 15:10:27 8F5E210 r Found smartreader device 001:004
2012/05/11 15:10:27 8F5E210 r reader astro1 initialized (device=001:004, detect=cd, mhz=686, cardmhz=357)
2012/05/11 15:10:28 8F5E210 r astro1 card detected
2012/05/11 15:10:31 8F5E210 r ATR: 3F FF 11 25 03 10 80 41 B0 06 69 FF 4A 50 70 00 00 41 5A 01 00 11
2012/05/11 15:10:31 8F5E210 r Maximum frequency for this card is formally 5 Mhz, clocking it to 6.86 Mhz
2012/05/11 15:10:33 8F5E210 r [videoguard2-reader] parental lock setting: FF FF 00 00
2012/05/11 15:10:33 8F5E210 r [videoguard2-reader] type: VideoGuard Astro Malaysia (09AC), caid: 09AC
2012/05/11 15:10:33 8F5E210 r [videoguard2-reader] serial: XXXXXXXX, BoxID: 001F1F1F, baseyear: 2004
2012/05/11 15:10:33 8F5E210 r [videoguard2-reader] ready for requests
2012/05/11 15:10:33 8F5E210 r found cardsystem videoguard2
2012/05/11 15:10:33 8F5E210 r [videoguard2-reader] astro1 card detected -
These readings are from your server directly ! so they will be lower than the actual recievers times (Just to clarify) my server has the same times as you have posted but the reciever will report 0.154- 0.170 (in realtime) this is using Omnikey reader with powered USB hub.
hope this helps.
Hi pacman it seems from his post his ecm times are high at the server. I cant think of anything else to suggest to lower them hes clocking his card to 6.86 which is higher than I do. I know sometimes people say not to overclock as it can be counter productive due to higher error rate. I take your point on where you measure the ecm times but I spose its relative. lower at server should be lower at box but a true time would be at the box. -
Also if he has massive hops set on the server that won't help !! I would test without other connections (if he has any others) and then add the servers/peers 1x1 untill his times increase then he will know what the problem is.
-
I agree mate
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!