BlackHole can't be update it like that.
If you want the newest version, go to menu => blackhole pesonal backup and do a backup of all your settings on a usb stick.
Then you can install 1.7.9 in the receiver the usual way, after the new image starts, go to the menu => blackhole personal backup and restore the backup from usb stick.
Now you will have all your settings, including cams.
Posts by GeorgeXL
-
-
You are blocking the wrong emms, the settings should be like this :
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1Also if you are using oscam with dvb-api, make shure the user has AU on.
-
The latest is the best, BlackHole 1.7.8.
-
Open a putty session and connect to the box with Telnet not SSH, and set a password using the command : passwd
-
Good news.
-
2012/11/28 19:36:21 A1CC0A8 r tivusat [smargo] smargo init
2012/11/28 19:36:21 A1CC0A8 r tivusat [smargo] ERROR: Opening device 002:007 (errno=2 No such file or directory)
2012/11/28 19:36:21 A1CC0A8 r tivusat [smargo] Cannot open device: 002:007Have you restarted the server ? Go to "scan usb" again, maybe the serial & reader are different now.
I don't know why you get the error "smartreader protocol not supported" , that is how it works for me. -
BlackHole doesn't have that option, but BlackPole does.
-
Ok, with smargo protocol is it working ?
-
The settings for protocol and device must be like this :
protocol = smartreader
device = 002:007 -
Congratulations friends, they are well deserved.
-
Yes it is.
-
Hbbtv doesn't work on VIX image.
-
This is from my config and ESPN HD works :
0963:3E,42,44,45,47,4E,53,54,5F,61,62,67,68,69,6A,6B,6D,6F,71,72,73,76,77,78,79,7A,7C,7D,7E,80,82,8B,85
I can't find alba hd, do you mean alibi hd ?
-
Try a FPGA update, maybe it solves your problem.
-
B.H. for Solo doesn't have HbbTv because of low performances of this box.
-
Not with the remote.
-
George XL, please could you explain about the following part of your post :-By a software FTP or by telnet
create a folder named movie on your usb stick: /media/usb/movie
Where can I find FTP ot telnet and how would I use it. Many ThanksSorry for the late reply.
You must create a folder called movie in /media/usb/ .
You can do this using a ftp software ( i use total commander ) or open a tellnet sesion and create the folder using linux commands. -
This is the oficial tutorial :
How to setup your Vu+ box for recording on an usb stick or on another device connected to an usb port.
Mount your usb stick by Devices Manager as /media/usb
Blue Panel > Black Hole Settings > Devices Manager > Mountpoints ...By a software FTP or by telnet
create a folder named movie on your usb stick: /media/usb/movieEnable Expert mode in Customize menu:
Menu > Setup > System > Customize > Setup Mode: ExpertChange the default paths for recondings:
open theRecordings Pathspanel
Menu > Setup > Sytem > Recording PathSelect the item Default movie location and press the OK button
then press the Menu button and select the item Switch to filelist
now you will be able to navigate through the directories and to select the path
/media/usb/movie by pressing the green buttonAfter you pressed the green button and returned to the Recordings Paths panel
select the item Timer record location by pressing the OK button
and select the path /media/usb/movie by pressing the arrow down button
then press the OK button to save and to return to Recordings Paths panelSelect the item Instant record location by pressing the OK button
and select the path /media/usb/movie by pressing the arrow down button
then press the OK button to save and to return to Recordings Paths panelselect the item Timeshift location and press the OK button
then press the Menu button and select the item Switch to filelist
navigate through the directories and select the path /media/usb/movie by pressing the green buttonNow you will return to the Recordings Paths panel and you have to press the green button to save all the setting and to exit from the panel.
-
Yes, it's about ecm whitelist, look in this thread : http://linuxsat-support.com/os…ngratez-hd.html#post80975
-