54b594e852fbbd29.jpgad32621383d19ca05.jpg
hello could anyone post correct configuration for band stacked c band lnb.
54b594e852fbbd29.jpgad32621383d19ca05.jpg
hello could anyone post correct configuration for band stacked c band lnb.
any chance with vu+duo2 on black hole image ?
Do i have Any chance of fixing the problem
Hi
Emp centurie S8/1PCP-W2 switch
I have connect monoblock to 8×1 switch
My configuration for monoblock connect with power pass splitter
Outputs from power pass splitter is connected to 5 th and 6 th ports of DiseqC switch
Configuration Mode: Advanced
Satelitte: sat1
LNB: Lnb5
Priority: Auto
LOF: Universal Lnb
Voltage Mode: Polarization
Increased Voltage: No
Tone Mode: Band
DiseqC Mode: 1.1
Tone Burst: None
Committed DiseqC Command: AA
Fast DiseqC: no
Sequence Repeat: no
Command Order: Committed,Uncommitted,Toneburst
Uncommitted DiseqC Command: Input2
DiseqC repeats one
Configuration Mode: Advanced
Satelitte: sat2
LNB: Lnb6
Priority: Auto
LOF: Universal Lnb
Voltage Mode: Polarization
Increased Voltage: No
Tone Mode: Band
DiseqC Mode: 1.1
Tone Burst: None
Committed DiseqC Command: AB
Fast DiseqC: no
Sequence Repeat: no
Command Order: Committed,Uncommitted,Toneburst
Uncommitted DiseqC Command: Input2
DiseqC repeats one
if i remove power pass spilter and connect monoblock to diseq switch it is not working give me right config please
hello
i have problem with 2 hd channels(ac3) of no sound.i add audio pid from dreambox edit still no sound. image is black hole 3.0.g
how to fix this
thank you.
If you are able to start the plugin the dependencies are installed, you don`t need anything else..
you mean " libc6_2.19-r0.0_mips32el.ipk" is not necessary ?
These dependencies can be downloaded from our panel..
i did install from linux sat panel but i think i install one file dvbsnoop_0.0+cvs20081001-r1.0_mips32el.ipk which is first file on the depandancies tab on linux sat panel
should i install 2 files sd above what are the 2 files
then i run dvbsnoop -s pidsacn but only pid scan flashing nothing happens
May I have file for vu + duo2 running black hole image
I install from linux sat support panel is that enough
Thank you
which file for blackhole does it have web interface and also whether it has powervu and tanderburg
Hi
Emp centurie S8/1PCP-W2 switch
I have connect monoblock to 8×1 switch
problem is most of the times sat2 not working on monoblock sometime works. other sat1 on monoblock always works
single lnb works good
When sat1 works if I change to any other sat and switch back to sat1 again it is not working.
My configuration for monoblock connect with power pass splitter
Output from power pass splitter is connected to 5 th and 6 th ports of DiseqC switch
Configuration Mode: Advanced
Satelitte: sat1
LNB: Lnb5
Priority: Auto
LOF: Universal Lnb
Voltage Mode: Polarization
Increased Voltage: No
Tone Mode: Band
DiseqC Mode: 1.1
Tone Burst: None
Committed DiseqC Command: AA
Fast DiseqC: no
Sequence Repeat: no
Command Order: Committed,Uncommitted,Toneburst
Uncommitted DiseqC Command: Input2
DiseqC repeats:none
Configuration Mode: Advanced
Satelitte: sat2
LNB: Lnb6
Priority: Auto
LOF: Universal Lnb
Voltage Mode: Polarization
Increased Voltage: No
Tone Mode: Band
DiseqC Mode: 1.1
Tone Burst: None
Committed DiseqC Command: AB
Fast DiseqC: no
Sequence Repeat: no
Command Order: Committed,Uncommitted,Toneburst
Uncommitted DiseqC Command: Input2
DiseqC repeats:none
8 IN TO 1 SWITCH
Emp centurie S8/1PCP-W2 switch
i have problem some times sat2 not working on monoblock sometime works. other sat1 on monoblock always works
single lnb works good
Configuration Mode: Advanced
Satelitte: sat1
LNB: Lnb5
Priority: Auto
LOF: Universal Lnb
Voltage Mode: Polarization
Increased Voltage: No
Tone Mode: Band
DiseqC Mode: 1.1
Tone Burst: None
Committed DiseqC Command: AA
Fast DiseqC: Yes
Sequence Repeat: Yes
Command Order: Committed,Uncommitted,Toneburst
Uncommitted DiseqC Command: Input2
Configuration Mode: Advanced
Satelitte: sat2
LNB: Lnb6
Priority: Auto
LOF: Universal Lnb
Voltage Mode: Polarization
Increased Voltage: No
Tone Mode: Band
DiseqC Mode: 1.1
Tone Burst: None
Committed DiseqC Command: AB
Fast DiseqC: Yes
Sequence Repeat: Yes
Command Order: Committed,Uncommitted,Toneburst
Uncommitted DiseqC Command: Input2
Thankyou Sir. I tried this emu unfortunately it does not work with p'vu on my DM receiver. Do you possibly have a mipsoe20 libusb static version ?
see lots of people have difficult time with selecting right file could anybody explain with regards to above files which occasion it should be used
could you explain what is dvbip and also biss key, powervu key reader examples
above explanation is not clear for me
could you explain oscam and oscam emu i mean what is differance .is it oscam cannot clear keys ?
what is emulator reader
could anyone explain what is differance
oscam oscamemu osemu
oscam_1.20-rev-11245-oe1.6.rar
oscam_1.20-rev-11245-oe2.0.rar
oscam_1.20-rev-11245-Pli-4.0.rar
oscam_1.20-rev-11245-oe1.6-emu.rar
oscam_1.20-rev-11245-oe2.0-emu.rar
oscam_1.20-rev-11245-Pli-4.0-emu.rar
scam-svn11245-arm_cortex-webif-libusb-Distribution.tar.gz
oscam-svn11245-tplink_backfire-webif-libusb-Distribution.tar.gz
oscam-svn11245-mips-tplink-webif-libusb-Distribution.tar.gz
oscam-svn11245-i686-webif-libusb-Distribution.tar.gz
oscam-svn11245-i686-webif-libusb-pcsc-Distribution.tar.gz
oscam-svn11245-i686-webif-Distribution.tar.gz
oscam-svn11245-mips-tuxbox-webif-libusb-Light.tar.gz
oscam-svn11245-mips-tuxbox-webif-libusb-ssl-Distribution.tar.gz
oscam-svn11245-mips-tuxbox-webif-libusb-Distribution.tar.gz
oscam-svn11245-mips-tuxbox-webif-Distribution.tar.gz
oscam-svn11245-powerpc-tuxbox-webif-libusb-Light.tar.gz
oscam-svn11245-powerpc-tuxbox-webif-ssl-Distribution.tar.gz
oscam-svn11245-powerpc-tuxbox-webif-libusb-Distribution.tar.gz
oscam-svn11245-powerpc-tuxbox-webif-Distribution.tar.gz
oscam-svn11245-powerpc-tuxbox-old-webif-Light.tar.gz
oscam-svn11245-powerpc-tuxbox-old-webif-ssl-Distribution.tar.gz
oscam-svn11245-powerpc-tuxbox-old-webif-Distribution.tar.gz
oscam-svn11245-syn_atom-webif-Light.tar.gz
oscam-svn11245-syn_atom-webif-libusb-ssl-Distribution.tar.gz
oscam-svn11245-syn_atom-webif-libusb-Distribution.tar.gz
oscam-svn11245-syn_atom-webif-Distribution.tar.gz
oscam-svn11245-x86_64-pc-linux-webif-libusb-ssl-Distribution.tar.gz
oscam-svn11245-x86_64-pc-linux-webif-libusb-Distribution.tar.gz
oscam-svn11245-x86_64-pc-linux-webif-Distribution.tar.gz
oscam-svn11245-dreambox_fpu-webif-Light.tar.gz
oscam-svn11245-dreambox_fpu-webif-libusb-ssl-Distribution.tar.gz
oscam-svn11245-dreambox_fpu-webif-libusb-Distribution.tar.gz
oscam-svn11245-dreambox_fpu-webif-Distribution.tar.gz
oscam-svn11245-sh4-amino-webif-Distribution.tar.gz
oscam-svn11245-sh4-qboxhd-webif-Distribution.tar.gz
oscam-svn11245-arm-asuswrt-webif-libusb-Distribution.tar.gz
oscam-svn11245-marv-qnap-webif-libusb-Distribution.tar.gz
oscam-svn11245-fritz74xx-webif-libusb-Distribution.tar.gz
oscam-svn11245-fritz73xx-webif-libusb-Distribution.tar.gz
oscam-svn11245-arm-dockstar-webif-libusb-Distribution.tar.gz
oscam-svn11245-mips-fonera2-webif-libusb-Distribution.tar.gz
oscam-svn11245-mips-wrt54g-webif-libusb-Distribution.tar.gz
oscam-svn11245-Raspberry-webif-libusb-pcsc-Distribution.tar.gz
oscam-svn11245-azbox-ssl-webif-Distribution.tar.gz
i did try following files
oscam_1.20-rev-11245-oe2.0.rar
oscam_1.20-rev-11245-oe2.0-emu.rar
non of them seems to include web interface is it normal
which version for oscam emu with web interface
oscam_1.20-rev-11245-oe2.0-emu not worl ithink it has no webinf
oscam-svn11245-mips-tuxbox-webif-Distribution.tar works it has web interface
am i correct
no such directroy or file