Posts by amila4341

Quote from master G

use DCC 1.5..

how to telenet
what commands

Quote from master G

Did you change permissions of oscam to 755 then restart enigma2 ?

What happens when you try it in telnet ? /usr/bin/oscam

yes i did change permission
how to tlelenet on vucc

i did ftp oscam_1.20-rev-11242-oe2.0 to usr/bin and rename it to oscam and then edit Ncam_Oscam.sh
but cant get it working web interface is not working also any clue to reslove

- - - Updated - - -

this file works http://linuxsat-support.com/at…mentid=56800&d=1462571046
could anybody explain why what is the difference

Quote from master G

If this is the list of srvid for HD channels:

Code

9C92,9C66,9C76,9C7C,9C8F,9C44,9C90,9C98,9C75,9C7G,8168,8198,4F56,9C43,7543

oscam.services would look like this:

Code

[HD]
caid  = 0B00
srvid = 9C92,9C66,9C76,9C7C,9C8F,9C44,9C90,9C98,9C75,9C7G,8168,8198,4F56,9C43,7543

Add this to the reader that has only HD channels:

Code

services = HD

question is when i add another caid(4563) those channels with second and third so on is not displayed

caid = 0B00,4563

Overview
9C45 : 0B00@000000:9C45 unknown- this channel caid is 4563

Quote from jokosat

Have you try ccam 230 ???

- - - Updated - - -

I THINK YOU NEED TO GOOGLE AND FIND ANSWER

i try google and came up wtih
"
OK,the VU+ Duo has two cardreaders.
The upper one is conax embed but it will read any with the help of an emu.
The lower one is an Xcrypt,the number one in the world,preferred by all the companies that produce quality receivers and this one is compatible with all the card systems.
So don't worry guys.You can grab it, because it will work with any card."
and also contrasting ideas
does above is correct for vu+duo2

- - - Updated - - -

my reader setings
[reader]
label = second_internal_reader
description = For dreambox upper smartcard slot, for VU+ DUO lower slot
protocol = internal
device = /dev/sci1
pincode = 1234
caid = 0B00
detect = cd
mhz = 500
cardmhz = 357
group = 1
emmcache = 1,1,0,0

in oscam status tab (no entitlements)

Quote from jokosat

good morning i dont know them card ,they are paired?? try with cccam 230 .

do you know the caid ?

i want to know is it possible to run these cards on vu+duo2 internal card readers without ci cam
they are paired but key may be found

hello
i have 2 smari cards
1 irdeto
2 conax
could i use it onvu+duo2 internal card reader

I have caids 0b00.674b,4567
0boo is ok but others not thai is the problem
I CHECK BY CHAINGING CAID ORDER IF I CHANGE 0B00 TO 2ND POSITION ALL ARE NOT OK
THAT MEAN ONLY FIRST CAID IS SHOWING IN SERVICES

ALL ARE HD NO NEED TO SEPERATE I WANT TO CONFINE HD ONES TO ONE READER
WHEN I CLICK Show Services SOME CHANNELS ARE SHOWN AS UNKNOWN ONLY FIRST CAID IS RECOGNIZED

Services updated
Edit Service
Caid:
0B00,ABCD,FFFE,BEFA,BCDE,ACDE
Provid:
000000
Srvid:
9C92,9C66,9C76,9C7C,9C8F,

9C44 : 0B00@000000:9C44 unknown
9C90 : TLC HD
9C98 : TRAVEL HD
9C75 : 0B00@000000:9C7F unknown
9C7G : 0B00@000000:9C7D unknown
8168 : 0B00@000000:8168 unknown
8198 : 0B00@000000:8198 unknown
4F56: 0B00@000000:4F57 unknown
9C43 : AXN HD
7543 : 0B00@000000:7543 unknown
9C9E : HISTORY HD

I did as you told but only service id with 0b00 is working
other channels with different service ids shown as unknown

How to add several caid in to it

9C7C : 0B00@000000:9C7C unknown

my problem is i have two clines one have only sd but one have hd and sd what i want to do is assign only hd channels for sd &hd reader
can i do this with webinf
Caid:
Ident:
CHID:

hi
i want to assign hd channels for one socam reader
oscam.srvid2
9C8F:0900|ole HD|TV||TV
how to do this
there other sd channels with caid 0b00 they should be assign to other reader
thanks

abid has posted in other forum that VU+ all current models except Solo 4k are not storing channels of Videocon package available on ST2 satellite located at 88 east but no solution has been found .any suggestions please................

Below is detailed video of the same

Quote from amila4341

for vu+ "oscam-svn11211-mips-tuxbox-webif-libusb-ssl-Distribution.tar.gz" am i correct
if i need oscam emu which file i should use and also
oscam_1.20-rev-11211-oe2.0.rar
oscam_1.20-rev-11211-oe2.0-emu.rar
in which occasions above files used

thanks.
could i instal oscam and oscam emu in box and used one at a time.not both at once
if so how?

for vu+ "oscam-svn11211-mips-tuxbox-webif-libusb-ssl-Distribution.tar.gz" am i correct
if i need oscam emu which file i should use and also
oscam_1.20-rev-11211-oe2.0.rar
oscam_1.20-rev-11211-oe2.0-emu.rar
in which occasions above files used

i have installed black hole3.0.1 f on my vu+duo2 then i did install
OSCam 11198 IPK .
now i need to update it to latest svn. how could i do it.
there lot of files on download section

oscam_1.20-rev-11211-oe1.6.rar
oscam_1.20-rev-11211-oe2.0.rar
oscam_1.20-rev-11211-Pli-4.0.rar
oscam_1.20-rev-11211-oe1.6-emu.rar
oscam_1.20-rev-11211-oe2.0-emu.rar
oscam_1.20-rev-11211-Pli-4.0-emu.rar
OSCam_1.20_svn_r11211_mipsel_OpenPLI_4.0 _Emu_Patched_Webif_Ssl.zip
oscam-svn11211-dreambox_fpu-webif-Light.tar.gz
oscam-svn11211-dreambox_fpu-webif-libusb-ssl-Distribution.tar.gz
oscam-svn11211-dreambox_fpu-webif-libusb-Distribution.tar.gz
oscam-svn11211-dreambox_fpu-webif-Distribution.tar.gz
oscam-svn11211-syn_atom-webif-Light.tar.gz
oscam-svn11211-syn_atom-webif-libusb-ssl-Distribution.tar.gz
oscam-svn11211-syn_atom-webif-libusb-Distribution.tar.gz
oscam-svn11211-syn_atom-webif-Distribution.tar.gz
oscam-svn11211-x86_64-pc-linux-webif-libusb-ssl-Distribution.tar.gz
oscam-svn11211-x86_64-pc-linux-webif-libusb-Distribution.tar.gz
oscam-svn11211-x86_64-pc-linux-webif-Distribution.tar.gz
oscam-svn11211-powerpc-tuxbox-old-webif-Light.tar.gz
oscam-svn11211-powerpc-tuxbox-old-webif-ssl-Distribution.tar.gz
oscam-svn11211-powerpc-tuxbox-old-webif-Distribution.tar.gz
oscam-svn11211-powerpc-tuxbox-webif-libusb-Light.tar.gz
oscam-svn11211-powerpc-tuxbox-webif-ssl-Distribution.tar.g
oscam-svn11211-powerpc-tuxbox-webif-libusb-Distribution.tar.gz
oscam-svn11211-powerpc-tuxbox-webif-Distribution.tar.gz
oscam-svn11211-mips-tuxbox-webif-libusb-Light.tar.gz
oscam-svn11211-mips-tuxbox-webif-libusb-ssl-Distribution.tar.gz
oscam-svn11211-mips-tuxbox-webif-libusb-Distribution.tar.gz
oscam-svn11211-mips-tuxbox-webif-Distribution.tar.gz
oscam-svn11211-tplink_backfire-webif-libusb-Distribution.tar.gz
oscam-svn11211-mips-tplink-webif-libusb-Distribution.tar.gz
oscam-svn11211-mips-wrt54g-webif-libusb-Distribution.tar.gz
oscam-svn11211-fritz73xx-webif-libusb-Distribution.tar.gz
oscam-svn11211-azbox-ssl-webif-Distribution.tar.gz
oscam-svn11211-arm-asuswrt-webif-libusb-Distribution.tar.gz
oscam-svn11211-mips-fonera2-webif-libusb-Distribution.tar.gz
oscam-svn11211-fritz74xx-webif-libusb-Distribution.tar.gz
oscam-svn11211-marv-qnap-webif-libusb-Distribution.tar.gz
oscam-svn11211-i686-webif-libusb-Distribution.tar.gz
oscam-svn11211-i686-webif-libusb-pcsc-Distribution.tar.gz
oscam-svn11211-i686-webif-Distribution.tar.gz
oscam-svn11211-arm_cortex-webif-libusb-Distribution.tar.gz
oscam-svn11211-Raspberry-webif-libusb-pcsc-Distribution.tar.gz
oscam-svn11211-sh4-qboxhd-webif-Distribution.tar.gz
oscam-svn11211-sh4-amino-webif-Distribution.tar.gz
oscam-svn11211-arm-dockstar-webif-libusb-Distribution.tar.gz

so how could i find what i need. and how to do it

it will be helpful to lot of others if anyone could explain it step by step process
thank you........

how to correct this on black hole 3.0.1. f
3e2f2e0a04e0e71f3.jpgvu+duo2

my vu+duo2 does not show signals on IntelSAT 12 (45E) tp- 11550V, 28800, 8PSK, DVB-S2, FEC- 3/5
what might be the problem. is it problem with tuner capabilities
i sent message to vuplus unfortunately no response