Posts by orateyouth

Hi guys just wanted to share my experience. I had the same issue as deejay_waz but with a skybox V8S and after a lot of reading and many, many times trying different methods nothing seemed to work so tried my own ways so this is what I did to bring a V8S back to life.

With the dish feed plugged in booted the box but pressing menu as soon as it boots within a split second before it freezes.
Do a factory reset deleting all files and then uploading blank constant.cw and CCcam.cfg with the lan tool.
Delete all channels.
Then I upgraded the firmware using USB latest one while writing is V8 V6 150519.abs from skybox.cc and waited for reboot
Uploaded the latest ajsat list waited for reboot then pressed menu as soon as it booted and then changed time setting for summer time as we are in summer.
Then I exited to the TV and low and behold the box didn't lock up and is still running as I am writing this.

Changing the time settings may not be needed but they are the exact steps I took and it worked and now time to try it on a F5 and F5s

Update!!

Just done the same procedure on the F5s and worked a treat :) Hope others find this useful.

Quote from stevejo

aye that should be ok

Thanx, I got myself the 550 and spent some time on live chat to be told I needed to ring, so after a long phone call and a lot of questions they finally paired my card and now back up and running.

Quote from master G

Try converting the boxkey with Dreambox Config Creator, then adding it to oscam.server

Code

boxid=XXXXXXXX

I have done that but use nds box key converter found on here, this is the oscam.server with my reader.

[reader]
label = b***b
description = b***b
protocol = pcsc
device = 0
services = !dead_hd
autospeed = 0
caid = 0963
boxid = xxxxxxxx
fix07 = 0
detect = cd
ident = 0963:000000
group = 2
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
lb_weight = 101

Quote from busman

for white card 0963 any none hd box will do

Something like a drx550?

Quote from master G

Maybe worth trying Sky HD Multiroom Box DRX595L. Have a look at this thread that shows the new 0960 card working in this box => ecm not found..

Or just pair it to any standard definition model..

Thanx for that, I ended up getting the drx595-c and paired my card to it but still the same, would it make any difference in drx595L or drx595-c and that thread says 0960 card works but doesn't mention the 0963 which I have.

Hi, I have a 0963 card and found this thread and purchased a drx595-c and paired my card to it but still not getting movies or sport, I know guys have said it works with 0960 card and thought this would also work for the 0963 card. I am sure I am missing something and just hoping you guys could help me out.

Hi, sorry to jump on this thread. I have a card and it was paired to a dsi8215 but recently had to contact *** about pairing the card and after some time came to the conclusion they couldn't pair it to that box. It is currently paired to a drx890 but obviously don't want it to that box, could any of you guys suggest the next best one to pair my card to.

Hi, I am trying to get multics to work, I have it connected to oscam and detecting my local card but when I connect to multics I get ECM nok for some reason.

Here is my config which I am sure it has something to do with that.

################################################## ########
## Files
################################################## ########

FILE CHANNELINFO: "/var/etc/Cccam.channelinfo" ## default is disabled
FILE PROVIDERINFO: "/var/etc/CCcam.providers" ## default is disabled
FILE IP2COUNTRY: "/var/etc/ip2country.csv" ## default is disabled
FILE STYLESHEET: "/var/etc/multi.css" ## default is the built-in stylesheet file.
INCLUDE: "/var/etc/baddcw.cfg"
INCLUDE: "/var/etc/cache.cfg"
#INCLUDE: "/var/etc/multics.cfg"
TESTCHANNEL: 0500:032830:2206
################################################## ########
## WEB INTERFACE
################################################## ########

HTTP PORT: xxxx

#web user/pass protection
HTTP USER: xxxxx
HTTP PASS: xxxxx
HTTP TITLE: "MCSSERVER"
HTTP EDITOR: ON ## Show editor page (default: ON)
HTTP RESTART: ON ## Show restart button/page (default: ON)
HTTP AUTOREFRESH: 5000 ## Default autorefresh for webpages in milliseconds (default: 10000 ~ 10s)

################################################## ########
## CLUSTERED CACHE (Compatible with CSP cache)
################################################## ########

CACHE PORT: 1234 # cache listen port(udp)
CACHE TIMEOUT: 100 # timeout to wait dcw from cache servers if a cacherequest was received.
ACCEPT NULL ONID: 0 # accept/block cache requests with networkid=0 (by default = 1)
CACHE TRACKER: 0
CACHE AUTOADD: no
CACHE ALIVETIME: 8
################################################## ########
## SERVERS CONNECTIONS (CCCAM+NEWCAMD+MGCAMD)
################################################## ########
## CCcam Client version
CCCAM VERSION: 2.1.1 # Select cccam client version "2.0.11", "2.1.1", "2.1.2", "2.1.3" (default: 2.0.11)

## Change you clientid (in hex) by default it is Generic
NEWCAMD CLIENTID: 4343 # Mgcamd(6D67).newcs(6E73).Evocamd(6576).CCcam(4343) ...

N: mydns.dyndns.tv port user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14

#C: localhost 23000 user pass 2

################################################## ########
## USR
################################################## ########
## Default des-key for all profiles
DEFAULT KEY: 01 02 03 04 05 06 07 08 09 10 11 12 13 14

## Global Users, must be defined before the first profile
USER: test test { checkdcw=yes } # for all profiles

################################################## ########
## PROFILES DEFAULT VALUES
################################################## ########

## BAD DCW

## default profile options
DEFAULT KEY: 01 02 03 04 05 06 07 08 09 10 11 12 13 14
DEFAULT DCW TIME: 0
DEFAULT DCW TIMEOUT: 3500
DEFAULT SERVER MAX: 0
DEFAULT SERVER FIRST: 2
DEFAULT SERVER INTERVAL: 100
DEFAULT SERVER TIMEOUT: 4500
DEFAULT RETRY NEWCAMD: 3
DEFAULT RETRY CCCAM: 10
DEFAULT CACHE TIMEOUT: 100
DEFAULT DCW CHECK: 1
DEFAULT DISABLE CCCAM: NO
DEFAULT DISABLE NEWCAMD: NO
DEFAULT DISABLE RADEGAST: YES
DEFAULT DISABLE CACHE: NO
DEFAULT DISABLE CACHEEX: YES
DEFAULT CCCAM CHECKDCW: YES
DEFAULT MGCAMD CHECKDCW: YES
DEFAULT NEWCAMD CHECKDCW: YES

########################################
[*** UK ] By Tiesto.multics.info
########################################
PORT: 8000
CAID: 0963
PROVIDERS: 000000
ONID: 2
DCW TIMEOUT: 550
SERVER TIMEOUT: 280
SERVER VALIDECMTIME: 500
RETRY NEWCAMD: 3
RETRY CCCAM: 3
ACCEPT NULL SID: 0
ACCEPT NULL PROVIDER: 1
CACHE TIMEOUT: 100
DCW SWAP: YES
DCW HALFNULLED: YES
#USER: test test

Hope someone can help me out with this one.

This tool is a load of bo**ox, I have have just spent hours sorting all the channels for it to tell me it can't save and get these messages.

"The net number is not match the config, please check config" and "The TP number is not match the config, please check config"

Hi guys, here is my attempt at a channel list for the X5

Favs
1: Entertainment
2: Lifestyle & Documentaries
3: Movies
4: Sport
5: Kids
6: Music
7: International
8: Free to add your own

There maybe some mistakes but please post here and I will update

No channel lists I have used seem to work. I have deleted the old channels from my x5 then loaded this one but when the box restarts the channels aren't in order they are all over the place.

Has anyone got any ideas? I am to bone idol to do it by the remote especially now the sun is out but if I have to then I will while the Mrs watches her soaps

Hi guys, I am having an issue with the remote cache. When ever csp is run and not receiving any remote hits the server runs fine with with no O flags. When I start receiving remote hits I get a lot of OF flags and causing a lot of freezing and once the remote hits start coming I cant figure out how to disable it any help is much appreciated.

Here is my config settings

<cardserv-proxy ver="0.9.0">

<ca-profiles>
<default-des-key>01 02 03 04 05 06 07 08 09 10 11 12 13 14</default-des-key>
<max-threads>6675000</max-threads>
<extended-newcamd listen-port="xxxxx" debug="true"/>

<profile name="0963-***UK" ca-id="0963" network-id="0002" provider-idents="00 00 00" enabled="true" debug="true">
<newcamd listen-port="xxxxx">
</newcamd>
<block-services></block-services>
<services-file format="cccam" >/var/etc/CCcam.channelinfo</services-file>
<no-validation>true</no-validation>
</profile>
</ca-profiles>

<logging log-ecm="true" log-emm="true" log-zapping="false" hide-ip-addresses="false">
<log-file rotate-count="3" rotate-max-size="1024">log/cardserv.log</log-file>
<log-level>INFO</log-level>
<silent>true</silent>
<debug>false</debug>
</logging>

<rmi>
<display-name>CSP</display-name>
<status-web>
<listen-port>xxxxx</listen-port>
<ssl enabled="false">
<keystore password="secret">etc/csp_keystore</keystore>
</ssl>
<war-file>lib/cs-status.war</war-file>
<super-users>user</super-users>
</status-web>
</rmi>

<user-manager class="com.bowman.cardserv.SimpleUserManager">
<auth-config>
<user name="user" password="pass" max-connections="" profiles="0963-***UK"/>
</auth-config>
</user-manager>

<connection-manager>
<reconnect-interval>60</reconnect-interval>
<default-des-key>01 02 03 04 05 06 07 08 09 10 11 12 13 14</default-des-key>
<default-keepalive-interval>55</default-keepalive-interval>
<max-cw-wait>1800ms</max-cw-wait>
<congestion-limit>1000ms</congestion-limit>
<timeout-disconnect-threshold>4</timeout-disconnect-threshold>
<service-map>
<mapper>
<auto-reset-threshold>20</auto-reset-threshold>
</mapper>
<mapper profile="0963-***UK">
<reset-services>d7c3 d7c0 d7c2 d7bf d76c d7bb d7c7</reset-services>
<block-services></block-services>
</mapper>
</service-map>

<cws-connectors>

<newcamd-connector name="Local1" metric="0" profile="0963-***UK" enabled="true">
<host>xxx.xxx.x.x</host>
<port>xxxxx</port>
<user>csp</user>
<password>csp</password>
<des-key>01 02 03 04 05 06 07 08 09 10 11 12 13 14</des-key>
<au-users></au-users>
<asynchronous>true</asynchronous>
</newcamd-connector>

<csp-connector name="cws" enabled="true" metric="2">
<url>http://xxx.dyndns.dyns:xxxx</url>
<user>user</user>
<password>pass</password>
<asynchronous>true</asynchronous>
<request-cache-updates>true</request-cache-updates>
</csp-connector>

</cws-connectors>

</connection-manager>

<proxy-plugins>
<plugin class="com.bowman.cardserv.LoggingPlugin" enabled="false">
<plugin-config>
<log-dir>log/traffic</log-dir>
<log-level>ALL</log-level>
<ip-filter>*</ip-filter>
</plugin-config>
</plugin>
<plugin class="com.bowman.cardserv.DcwFilterPlugin" enabled="true" jar-file="dcwfilterplugin.jar"/>
<plugin class="com.bowman.cardserv.ProviderIdentPlugin" enabled="true" jar-file="provideridentplugin.jar"/>
<plugin class="com.bowman.cardserv.I*****Plugin" enabled="true" jar-file="i*****plugin.jar"/>
</proxy-plugins>

<cache-handler class="com.bowman.cardserv.ClusteredCache">
<cache-config>
<cw-max-age>19</cw-max-age>
<max-cache-wait>300ms</max-cache-wait>
<local-host>local.ip</local-host>
<local-port>local.port</local-port>
<tracker-url>file:///usr/local/csp/cache/cluster</tracker-url>-->
<sync-period>30ms</sync-period>
<cw-validation checksum="true" zero-counting="true" log-warnings="true"/>
</cache-config>
</cache-handler>

</cardserv-proxy>

Quote from sync

How many clients do you have to give you 285 forwards ?

I have sorted that now it seems, I only had 12 active sessions.

I am only getting around 25% cache hits, but iv been told this is low.

Here is some of my config.

<connection-manager>
<reconnect-interval>60</reconnect-interval>
<max-cw-wait>3500</max-cw-wait><hard-congestion-limit>true</hard-congestion-limit>
<delay-missing-sid>100</delay-missing-sid>
<default-des-key>01 02 03 04 05 06 07 08 09 10 11 12 13 14</default-des-key>
<default-keepalive-interval>55</default-keepalive-interval>

<service-map>
<mapper>
<auto-reset-threshold>20</auto-reset-threshold>
</mapper>
<mapper profile="0963-***UK">
<reset-services></reset-services>
<block-services></block-services>
</mapper>
</service-map>

<newcamd-connector name="Local1" metric="0" profile="0963-***UK" enabled="true">
<host>ip-address</host>
<port>port</port>
<user>user</user>
<password>pass</password>
<au-users></au-users>
<asynchronous>true</asynchronous>
</newcamd-connector>

<csp-connector name="name" enabled="true" metric="1">
<url>dyn.dns:port</url>
<user>user</user>
<password>pass</password>
<request-cache-updates>true</request-cache-updates>
</csp-connector>

<cache-handler class="com.bowman.cardserv.ClusteredCache">
<cache-config>
<cw-max-age>8</cw-max-age>
<max-cache-wait>350</max-cache-wait>
<local-host>dyn.dyn</local-host>
<local-port>port</local-port>
<!--<tracker-url>file:///usr/local/csp/cache/cluster</tracker-url>
<tracker-update>1</tracker-update>-->
<sync-period>0</sync-period>
<cw-validation checksum="true" zero-counting="true" log-warnings="true" require-id="true"/>
<hide-names>false</hide-names>
<debug>false</debug>
</cache-config>
</cache-handler>

Hope that helps

I have csp running on centos 5 but for some reason it grabs more ecm requests from cws connectors than my local n line connector, how can I resolve this?

Also I get 285 forwards during last period, now to me that seems quite high.

If anyone can help that would be greate