Posts by 4Him

Quote from master G

Quote from 4Him

timeout (5001 ms) by SMARTMOUSE

This log only shows oscam gave up trying that channel. It doesn`t show any other error to give us a reason why.

Is your smart card reader a smargo ? If so, have you set the mhz to 500 on it (not in oscam.server, on the smargo) ?

Do you have P: 0B02:000000 in oscam.dvbapi ?

Show us some other errors from the log, if any.

Post the reader config from oscam.server for the smart card reader.

Display More

it's a smarteader usb with no mhz setting

after I putted P: 0B02:000000 in oscam.dvbapi I have no vision at all now. same thing if I remove this string.

• 2020/05/03 23:48:54 451546A1 r (reader) SMARTMOUSE [mouse] Error getting card status.

Quote from master G

Quote from 4Him

hello through ftp I have in var/volatile/log

Change the value to logfile = /var/volatile/log/oscam.log

2020/05/03 22:48:14 2C6B50B1 c (ecm) dvbapi (0B02@000000/0000/000F/67:CDBEBF6F39D8E15371FB180371E3414B): timeout (5001 ms) by SMARTMOUSE

2020/05/03 22:48:14 00000000 >> OSCam << cardserver log switched, version 1.20_svn, build r11576-798 (arm-oe-linux-gnueabi)

2020/05/03 22:48:14 2C6B50B1 c (dvbapi) Demuxer 0 restarting decoding requests after 1 ms with 1 enabled and 0 disabled ecmpids!

2020/05/03 22:48:14 2C6B50B1 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0B02 PROVID 000000 ECMPID 0B02 ANY CHID PMTPID 1B67 VPID 05DC

2020/05/03 22:48:16 2C6B50B1 c (ecm) dvbapi (0B02@000000/0000/000F/67:CDBEBF6F39D8E15371FB180371E3414B): timeout (5000 ms) by SMARTMOUSE

2020/05/03 22:48:19 2C6B50B1 c (ecm) dvbapi (0B02@000000/0000/000F/67:CDBEBF6F39D8E15371FB180371E3414B): timeout (5001 ms) by SMARTMOUSE

2020/05/03 22:48:19 2C6B50B1 c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 0 disabled ecmpids!

2020/05/03 22:48:19 2C6B50B1 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0B02 PROVID 000000 ECMPID 0B02 ANY CHID PMTPID 1B67 VPID 05DC

2020/05/03 22:48:20 2C6B50B1 c (ecm) dvbapi (0B02@000000/0000/000F/67:CDBEBF6F39D8E15371FB180371E3414B): timeout (5001 ms) by SMARTMOUSE

2020/05/03 22:48:21 2C6B50B1 c (ecm) dvbapi (0B02@000000/0000/000F/67:CDBEBF6F39D8E15371FB180371E3414B): timeout (5000 ms) by SMARTMOUSE

2020/05/03 22:48:21 2C6B50B1 c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 0 disabled ecmpids!

2020/05/03 22:48:21 2C6B50B1 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0B02 PROVID 000000 ECMPID 0B02 ANY CHID PMTPID 1B67 VPID 05DC

Quote from master G

Quote from 4Him

how to activate the log you have mentioned before?

By pasting the highlighted value above into oscam.conf.

In the webinterface click Files > oscam.conf > look for [webif] > paste in the new value > restart oscam.

Wait for the freeze then look at the oscam log in /var/log

hello through ftp I have in var/volatile/log

folder these files, what do I need to open and share?

samba (folder)

boot

dmesg

lastlog

messages

wtmp

in webif i've copied in file - oscam.conf

logfile = /var/log/oscam.log

ok thank you how to activate the log you have mentioned before?

Thank you

Quote from master G

Activate the log in the [global] section in oscam.conf with this value logfile = /var/log/oscam.log

Restart OSCam and wait for the freeze.

Attach the log here, removing any sensitive info like ip addresses, username

hello how can I do what you suggest?

i've found this in live log:

• 2020/05/03 17:44:50 2F6D19AF c (ecm) dvbapi (0B02@000000/0000/0004/67:14542B07A25D7254632D9EB7C0A023CB): found (359 ms) by SMARTMOUSE
• 2020/05/03 17:44:59 2F6D19AF c (ecm) dvbapi (0B02@000000/0000/0004/67:BF776FC7A84A0FEE53BDBFC9D3DA6121): found (357 ms) by SMARTMOUSE
• 2020/05/03 17:45:09 2F6D19AF c (ecm) dvbapi (0B02@000000/0000/0004/67:360CB87575D143C7BBE0928C2AD74B1B): found (355 ms) by SMARTMOUSE
• 2020/05/03 17:45:19 2F6D19AF c (ecm) dvbapi (0B02@000000/0000/0004/67:9FB1502353D8428F5BEEF2D08B02B148): found (355 ms) by SMARTMOUSE
• 2020/05/03 17:45:29 2F6D19AF c (ecm) dvbapi (0B02@000000/0000/0004/67:A2E588CA761419E56158E0152D7D077A): found (353 ms) by SMARTMOUSE
• 2020/05/03 17:45:39 2F6D19AF c (ecm) dvbapi (0B02@000000
• /0000/0004/67:C1F2886275D58ACDAA13F2ABA8F82379): found (360 ms) by SMARTMOUSE

• 2020/05/03 17:45:51 483623F0 r (reader) SMARTMOUSE [conax] Warning: needed try nr 2, next ECM has some delay
• 2020/05/03 17:45:54 2F6D19AF c (ecm) dvbapi (0B02@000000/0000/0004/67:4FDA907995200346554F593323FBA2C2): timeout (5001 ms) by SMARTMOUSE
• 2020/05/03 17:45:59 2F6D19AF c (ecm) dvbapi (0B02@000000/0000/0004/67:4FDA907995200346554F593323FBA2C2): timeout (5000 ms) by SMARTMOUSE
• 2020/05/03 17:45:59 2F6D19AF c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 0 disabled ecmpids!
• 2020/05/03 17:45:59 2F6D19AF c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0B02 PROVID 000000 ECMPID 0020 ANY CHID PMTPID 1B5C VPID 0190
• 2020/05/03 17:46:04 2F6D19AF c (ecm) dvbapi (0B02@000000/0000/0004/67:5F48503D7690EF947AD4784066E3DA7B): timeout (5000 ms) by SMARTMOUSE
• 2020/05/03 17:46:05 2F6D19AF c (-) -- Skipped 1 duplicated log lines --
• 2020/05/03 17:46:05 2F6D19AF c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 0 disabled ecmpids!
• 2020/05/03 17:46:05 2F6D19AF c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0B02 PROVID 000000 ECMPID 0020 ANY CHID PMTPID 1B5C VPID 0190
• 2020/05/03 17:46:09 2F6D19AF c (ecm) dvbapi (0B02@000000/0000/0004/67:5F48503D7690EF947AD4784066E3DA7B): timeout (5001 ms) by SMARTMOUSE
• 2020/05/03 17:46:10 2F6D19AF c (ecm) dvbapi (0B02@000000/0000/0004/67:5F48503D7690EF947AD4784066E3DA7B): timeout (5000 ms) by SMARTMOUSE
• 2020/05/03 17:46:10 2F6D19AF c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 0 disabled ecmpids!
• 2020/05/03 17:46:10 2F6D19AF c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0B02 PROVID 000000 ECMPID 0020 ANY CHID PMTPID 1B5C VPID 0190
• 2020/05/03 17:46:11 483623F0 r (reader) SMARTMOUSE [conax] Warning: needed try nr 2, next ECM has some delay

hello everybody

I've an issue with oscam-emu and smartmouse usb with a tv romania conax card on my ax hd 61

it's a "simple" card and it does not need pairing

after almost 60 seconds it stop to work and the image frozen.

you need to reboot the receiver but after 60 seconds it happens again.

Can someone help me please?

thank you in advance

best regards

hello does someone know what to insert in lamedb to watch via stream relay

t2-mi ku band tp on 54,9 east?

thank you in advance

best regards

hello s3no I've put wait you wrote in oscam.user but it does not work anyway...:(

best regards

hello,

after thousands of attemps I managed to set internal card reader AND usb smartreader with my 2 conax cards.

the problem is with usb cardreader because after 1 minute of vision of my TVR ROMANIA cards it stops to work

do you know why?

I attach my config and the log I hope you can help me

thank you in advance

best regards

2020/03/04 21:14:24 00000000 s (main) System name = Linux

2020/03/04 21:14:24 00000000 s (main) Host name = ax61

2020/03/04 21:14:24 00000000 s (main) Release = 4.4.35

2020/03/04 21:14:24 00000000 s (main) Version = #1 SMP Sat Jul 20 10:56:00 UTC 2019

2020/03/04 21:14:24 00000000 s (main) Machine = armv7l

2020/03/04 21:14:24 00000000 s (main) Stb model = hd61

2020/03/04 21:14:24 00000000 s (main) Stb boxtype = hd61

2020/03/04 21:14:24 00000000 s (main) creating pidfile /var/tmp/oscam-emu.pid with pid 2113

2020/03/04 21:14:24 00000000 s (emu) OSCam-Emu version 798

2020/03/04 21:14:24 00000000 s (config) userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled

2020/03/04 21:14:24 00000000 s (main) signal handling initialized

2020/03/04 21:14:24 00000000 s (led) LED support is not active. Can't detect machine type.

2020/03/04 21:14:24 00000000 s (net) cccam: initialized (fd=4, port=12000)

2020/03/04 21:14:24 00000000 s (reader) SMARTMOUSE [mouse] creating thread for device /dev/ttyUSB0

2020/03/04 21:14:24 00000000 s (reader) MTVA [internal] creating thread for device /dev/sci0

2020/03/04 21:14:24 00000000 s (reader) emulator [emu] creating thread for device emulator

2020/03/04 21:14:24 00000000 s (main) waiting for local card init

2020/03/04 21:14:24 0411EDFD r (emu) Stream key delayer initialized

2020/03/04 21:14:24 0411EDFD r (emu) Stream relay server initialized

2020/03/04 21:14:24 0411EDFD r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)

2020/03/04 21:14:24 00000000 (emu) INFO: FFDecsa parallel mode = 32

2020/03/04 21:14:24 232342DC h (webif) webif: decompressed 172595 bytes back into 416816 bytes

2020/03/04 21:14:24 232342DC h (webif) HTTP Server running. ip=:: port=83

2020/03/04 21:14:24 1ECD9E6A r (reader) MTVA [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)

2020/03/04 21:14:24 1ECD9E6A r (reader) MTVA [internal] Reader sci internal, detected box type: hd61

2020/03/04 21:14:24 787A918C r (reader) SMARTMOUSE [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)

2020/03/04 21:14:25 0411EDFD r (reader) emulator [emu] card detected

2020/03/04 21:14:25 1ECD9E6A r (reader) MTVA [internal] card detected

2020/03/04 21:14:25 787A918C r (reader) SMARTMOUSE [mouse] card detected

2020/03/04 21:14:26 1ECD9E6A r (reader) MTVA [internal] ATR: 3B 34 94 00 30 42 30 30

2020/03/04 21:14:26 0411EDFD r (reader) emulator [emu] found card system emu

2020/03/04 21:14:26 0411EDFD r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1

2020/03/04 21:14:26 0411EDFD r (emu) Reading key file: /etc/tuxbox/config/oscam-emu/SoftCam.Key

2020/03/04 21:14:26 0411EDFD r (emu) Total keys in memory: W:0 V:6 N:9 I:6 F:155 G:0 P:264 T:177 A:0

2020/03/04 21:14:26 787A918C r (reader) SMARTMOUSE [mouse] ATR: 3B 24 00 30 42 30 30

2020/03/04 21:14:28 787A918C r (reader) SMARTMOUSE [mouse] type: Conax, caid: 0B02, serial: ##########, hex serial: ########, card: v64

2020/03/04 21:14:28 787A918C r (reader) SMARTMOUSE [mouse] Providers: 1

2020/03/04 21:14:28 787A918C r (reader) SMARTMOUSE [mouse] Provider: 1 Provider-Id: 000000

2020/03/04 21:14:28 787A918C r (reader) SMARTMOUSE [mouse] Provider: 1 SharedAddress: ########

2020/03/04 21:14:28 787A918C r (reader) SMARTMOUSE [mouse] found card system conax

2020/03/04 21:14:28 787A918C r (reader) SMARTMOUSE [conax] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1

2020/03/04 21:14:28 787A918C r (reader) SMARTMOUSE [conax] Package: 1, id: 1010, classes: 01000001, date: 2020/03/01 - 2020/03/31, name: Conax

2020/03/04 21:14:28 787A918C r (reader) SMARTMOUSE [conax] Package: 2, id: 1010, classes: 01000001, date: 2020/02/01 - 2020/02/29, name: Conax

2020/03/04 21:14:28 787A918C r (reader) SMARTMOUSE [conax] ready for requests

2020/03/04 21:17:20 1ECD9E6A r (reader) MTVA [internal] Warning: needed try nr 2, next ECM has some delay

2020/03/04 21:17:20 1ECD9E6A r (reader) MTVA [internal] card system not supported

2020/03/04 21:17:20 1ECD9E6A r (reader) MTVA [internal] Normal mode failed, reverting to Deprecated Mode

2020/03/04 21:17:20 1ECD9E6A r (reader) MTVA [internal] ATR: 3B 34 94 00 30 42 30 30

2020/03/04 21:17:25 1ECD9E6A r (reader) MTVA [internal] type: Conax, caid: 0B1D, serial: ##########, hex serial: ########, card: v64

2020/03/04 21:17:25 1ECD9E6A r (reader) MTVA [internal] Providers: 1

2020/03/04 21:17:25 1ECD9E6A r (reader) MTVA [internal] Provider: 1 Provider-Id: 000000

2020/03/04 21:17:25 1ECD9E6A r (reader) MTVA [internal] Provider: 1 SharedAddress: ########

2020/03/04 21:17:25 1ECD9E6A r (reader) MTVA [internal] found card system conax

2020/03/04 21:17:25 1ECD9E6A r (reader) MTVA [conax] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1

2020/03/04 21:17:25 1ECD9E6A r (reader) MTVA [conax] Package: 1, id: 1070, classes: 01FFFFFF, date: 1990/01/01 - 1990/01/01, name: Preview 1

2020/03/04 21:17:25 1ECD9E6A r (reader) MTVA [conax] Package: 2, id: 1070, classes: 01FFFFFF, date: 1990/01/01 - 1990/01/01, name: Preview 1

2020/03/04 21:17:25 1ECD9E6A r (reader) MTVA [conax] Package: 3, id: 1080, classes: 01FFFFFF, date: 1990/01/01 - 1990/01/01, name: Preview 2

2020/03/04 21:17:25 1ECD9E6A r (reader) MTVA [conax] Package: 4, id: 1080, classes: 01FFFFFF, date: 1990/01/01 - 1990/01/01, name: Preview 2

2020/03/04 21:17:25 1ECD9E6A r (reader) MTVA [conax] Package: 5, id: 1010, classes: 010001FB, date: 2020/02/01 - 2020/02/29, name: Zone 01

2020/03/04 21:17:25 1ECD9E6A r (reader) MTVA [conax] Package: 6, id: 1010, classes: 010001FB, date: 2019/11/01 - 2019/11/30, name: Zone 01

2020/03/04 21:17:25 1ECD9E6A r (reader) MTVA [conax] ready for requests

2020/03/04 21:17:26 00000000 s (main) init for all local cards done

2020/03/04 21:17:26 7D098F0E c (client) plain dvbapi-client granted (dvbapi, au=auto (26 reader))

2020/03/04 21:17:26 7D098F0E c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam-emu/oscam.ccache

2020/03/04 21:17:26 7D098F0E c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0 maximum number of filters is 64 (oscam limit is 64)

2020/03/04 21:17:26 7D098F0E c (dvbapi) ERROR: ioctl(CA_GET_DESCR_INFO): Invalid argument

2020/03/04 21:17:28 7D098F0E c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0B02 ECM_PID: 0B02 PROVID: 000000

2020/03/04 21:17:28 7D098F0E c (dvbapi) Demuxer 0 found 1 ECM pids and 3 STREAM pids in CA PMT

2020/03/04 21:17:28 7D098F0E c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0B02 PROVID 000000 ECMPID 0B02 ANY CHID PMTPID 1B5A VPID 00C8

2020/03/04 21:17:28 7D098F0E c (ecm) dvbapi (0B02@000000/0000/0002/67:D5F476E8315C85A9F4E2599015059C49): found (360 ms) by SMARTMOUSE

2020/03/04 21:17:30 7D098F0E c (ecm) dvbapi (0B02@000000/0000/0002/67:3C9909CDE4EDCAA2DF28BC520CB925F7): found (361 ms) by SMARTMOUSE

2020/03/04 21:17:40 7D098F0E c (ecm) dvbapi (0B02@000000/0000/0002/67:6D17995F4583742DFDD2065B9109D35C): found (363 ms) by SMARTMOUSE

2020/03/04 21:17:50 7D098F0E c (ecm) dvbapi (0B02@000000/0000/0002/67:D02ABA74CEF1F8D946C3CEFC13C738C0): found (362 ms) by SMARTMOUSE

2020/03/04 21:18:00 7D098F0E c (ecm) dvbapi (0B02@000000/0000/0002/67:431D925888837B8EAF87B3981B404B14): found (360 ms) by SMARTMOUSE

2020/03/04 21:18:10 7D098F0E c (ecm) dvbapi (0B02@000000/0000/0002/67:29966F5EEF39DE3AF6D3FFD6BD4CC803): found (361 ms) by SMARTMOUSE

2020/03/04 21:18:20 7D098F0E c (ecm) dvbapi (0B02@000000/0000/0002/67:F94CAC7ABBD1B07CD43245A252168F30): found (358 ms) by SMARTMOUSE

2020/03/04 21:18:30 787A918C r (reader) SMARTMOUSE [conax] Warning: needed try nr 2, next ECM has some delay

2020/03/04 21:18:34 7D098F0E c (ecm) dvbapi (0B02@000000/0000/0002/67:02A50ED34785AB925E8AE6C7CFF5963C): timeout (5000 ms) by SMARTMOUSE

2020/03/04 21:18:40 7D098F0E c (-) -- Skipped 1 duplicated log lines --

2020/03/04 21:18:40 7D098F0E c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 0 disabled ecmpids!

2020/03/04 21:18:40 7D098F0E c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0B02 PROVID 000000 ECMPID 0B02 ANY CHID PMTPID 1B5A VPID 00C8

2020/03/04 21:18:44 7D098F0E c (ecm) dvbapi (0B02@000000/0000/0002/67:1DA03A1DAAC1E4C51D9C8064B52827BD): timeout (5000 ms) by SMARTMOUSE

2020/03/04 21:18:46 7D098F0E c (-) -- Skipped 1 duplicated log lines --

2020/03/04 21:18:46 7D098F0E c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 0 disabled ecmpids!

2020/03/04 21:18:46 7D098F0E c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0B02 PROVID 000000 ECMPID 0B02 ANY CHID PMTPID 1B5A VPID 00C8

2020/03/04 21:18:49 7D098F0E c (ecm) dvbapi (0B02@000000/0000/0002/67:1DA03A1DAAC1E4C51D9C8064B52827BD): timeout (5000 ms) by SMARTMOUSE

2020/03/04 21:18:50 787A918C r (reader) SMARTMOUSE [conax] Warning: needed try nr 2, next ECM has some delay

Quote from TheUltimate007

Can you please show the tuner model name and model number from the menus ?

hello sorry for late

best regards

hello I've mtva hungary conax card and I'd like to let it works on internal card reader with oscam emu

it trasmits on 9east 11958 V 27500

I don't know where to start and what to do

can you help me please?

similar request is for tvr conax card on 16 east

thank you very much

best regards

I ve both digitalb and tring paired cam

can I use through internal card reader?

if so how?

thank you

1- copy the firmware files on a pendrive

do I need to insert the pendrive in the receiver while is connected to rs232?

why it always gives me "waiting for rom" message?

regards

hello I've bought this new receiver because of the 2 CI slot + 1 card reader and I want to share some test I've made hope it can be appreciated:

1) It recognize a viaccess cam to watch rtv slovenia that doesn't work on other receiver also if the cam is pretty old. it does not need to assign anything on the menu as for other receivers. next test is to use 2 cam simultaneously. I hope I will check tonight with a CI+ cam.

657b78dfbd2fd7658fe.jpg

2) 4k channels works normally

e47ab29.jpg

3) multistream channels works normally

0fbe3c31c5e.jpg

4) blind scan. in this test you can find turksat bs of FTA tp. since it does not find (for example) 12015 H trasponder I think I will not use this feature, that I suppose could be inaccurate. that tp can be scanned manually anyway.

c0ae6.jpg

5) tuner sensitivity (the feature I need the most). in these photo you can see very hard to catch FOX TV tp on turksat on AX HD 61 and on OCTAGON SX88+ (pretty good tuner sensitivity but inferior compared to other receivers). SX88+ gives at least a glitched video when ax hd 61 just glitched audio and no video.

ax hd 61

f1d60fe216a21862aff6a3.jpg

sx88+

de42511f.jpg

other tuner sensitivity test shows smooth image on 30,5 east 12532 H 2000 when octagon sx88+ gives glitch

sx88+

712f5533560e524.jpg

bc0ec2538dde25d6c4335fb.jpg

ax hd 61

1a1f0bdabeb.jpg

6) "rallenty" movement when you change channels but I thing it's a hisilicon feature

7) fastest boot I ever seen

8) from first test on astra 4,8 east zeonbud tp, t2-mi can not be scanned automatically

9) the receiver can scan symbol rate <500 as you can see here

10) I can confirm 2 common interface can works simultaneously (other receivers can't). 1 Common interface + 1 CI+ was recognized automatically without any user operation

efa5b8929203100.jpg

11) as it happens on other receivers hispasat 11496 H 7884 & 21,6 east multistream tp have freeze (but it works normally on octagon sx88+)

ps I'm unable to use hbbtv anyone knows what & where download plugin?

more test will follow

best regards

hello oraldin

I've bought this https://www.amazon.it/gp/produ…tle_o01_s00?ie=UTF8&psc=1

isn't the same as for other receivers?

I'm unable to open the edision primo...:(

please help me if it's possible can you share some personal contact via pm (facebook or similar)

thank you best regards

hello,

can someone help me how to setup this reader in oscam emu?

what I need to modify?

thank you very much

best regards

hello,

I've both digitalb and tring albanian subscription paired to cam.

is it possible to use on the internal card reader?

if so how? i'm totallu unable to do anything with oscam/softcam

thank you

best regards

hello I have the message in the photo and seems nothing happens

what do I miss?

thank you

best regards

tuner model please

thank you

hello it's seems on air 3 t2-mi trasponder on 36east (sub saharian beam) that I can catch from Rome.

I've SF4008.

can someone help me what to insert in astra.conf and lamedb in order to catch that trasponder, please?

what parameters could helps?

an italian forum user gave me some screenshot from t2-mi analyzer

thank you best regards