Posts by ZigZag

  • Jedi Maker Xtream (IPTV Bouquet Creator) - Main thread

    Quote from tbe
    Quote from giorgoulla99

    When using the plugin, none of the tv series are added to the bouquets, the tv series category is blank.

    Can you advise what to do to solve this issue please...

    Is this plugin only good for live tv and not series?

    I had the same issue with 2 of my suppliers but not the 3rd. I did have some luck by going back to v5.28 and got a 2nd one working but never all 3. Assume it must be a supplier issue as works ok for most people. XStreamity works perfectly though for all suppliers

    It seems it might not be the most reliable plugin for the overall package. I will try the Xtreamity plugin instead.

    Out of curiousity, where would i find the v5.28 of JEDI maker Xtream plugin so i could try that instead?

  • CCcam will not open more than one channel at a time

    I appreciate your help.

    So, just to check, i install the latest version of Oscam from the Pur-e2 feed, then install the oscam config file too from the feeds.

    Then i activate and restart the box.

    Finally, i just edit my server data then restart.

    Apologies for the stupid question, where do i go to edit the port?

    Will this open all channels that the CCcam opens and will it also open up the S*y DE too?

  • CCcam will not open more than one channel at a time

    Is it possible to get some help too please?

    I have tried using Oscam to replace CCcam but as hard as i have tried i have not been successful in getting it to work.

    I just don't know what i'm doing wrong.

    I find the 2.2.1 or 2.3.0 versions very stable and quick to open all channels but when installing a version of Oscam from

    the options available in the image i use i cannot open anything.

    It would be great to be able to use Oscam to open the 'multi' channels as well as S*y DE.

    I have an Xtrend 9200 and a ZGemma H7S and cannot get Oscam to work on any.

    Images used are Pur-e2 or OpenHDF. (Pur-e2 no longer support the 9200).

    Having tried for months, CCcam is so much easier for me than getting Oscam to work.

  • Xtrend ET-10000 Issue - Please Help.

    I'm using the same HDMI cable i have been using with my old 9200 and not sure if it is v1.4, i assume it isn't as i haven't purchased one for many years.

    I have ordered one and expect it to be delivered on Monday. Do you think this could be the reason for the issue i have?

    I hope it will work with the new cable or i will have to return it. I have ordered a v1.4, is this okay or should i order a v2.0?

  • Xtrend ET-10000 Issue - Please Help.

    Quote from bmitie

    I have an xtrend 10000, its setup with openatv 6.3 and has a Kiddac skin. It tool a while to set it up but works a treat.


    Are you flashing it from as new or using the existing? In other words was it working when you got it?


    Have you a scart connection on TV? Its possible you are changing resolution and your screen cant display it.

    The set up is similar to the Xtrend 9200 we have been using since 2013/2014.

    I tried with the image that was flashed already which was OpenVix and the issue was evident with the very first key selection of the remote.

    After trying to get it to work for some 10 minutes i flashed two further images again with the same issue.

    I am using a HDMI not scart lead.

    I set the resolution to 50hz then tried Auto, i didn't try 60hz.

    Unfortunately, if i cannot resolve it i'll have to send it back.

  • Xtrend ET-10000 Issue - Please Help.

    When the receiver was set up earlier this afternoon it was flashed with OpenVix.

    I picked up the remote and selected Menu, clicked the down arrow key and the screen went black.

    After trying to get the Menu visible back on the screen for a few minutes it appeared and i pressed the remote and the screen went black again.

    I then flashed, pur-e2, satdream and still the same issue.

    I also tried another HDMI lead although it has worked fine on the old Xtream 9200 i replaced.

  • Xtrend ET-10000 Issue - Please Help.

    Hi everyone,

    I have just purchased a used Xtrend ET-10000 which i intend to use for a few months until i purchase a new receiver.

    I have had it delivered and just started to set it up but there is an issue with it and i would be happy to hear from anybody who

    may know of a solution, if there is one, before i send it back!

    As soon as i start to use the remote control in order to scroll through the menu and set it up once i have scrolled left or right or up/down via the arrow keys

    the screen turns black and stays black. Nothing is visible at all.

    Thank you if anybody can help..

  • Satellite Receiver Upgrade - Advice please

    Yes i know he's a great guy - i bought our current receiver from him and he offered the best service.

    I was hoping that someone who has bought a receiver recently from the latest range out there could

    offer any experience using it for what we will be using it for and so we don't make a mistake when choosing

    one.

  • Satellite Receiver Upgrade - Advice please

    Hi everyone,

    Firstly, i apologize for asking the same question that's been asked many times previously but i would be very grateful to hear

    from 'users' who can recommend the very best receiver for me to upgrade to please.


    We have been using an Xtrend 9200 for over 9yrs and it has worked flawlessly with a really great picture quality but it has now

    reached the end of the road and has become slow, frustrating to use with endless spinners whenever a channel is changed or a

    plugin is selected and in addition the memory is just no longer enough.


    The main 'must-haves' are:


    Excellent picture quality (the Xtrend offers a crisp quality image)

    Fast boot up and channel change, plugin use

    To be able to use a CS line with no problems with any CCcam version

    To work without any issues when using IPTV - with any provider used

    To be able use the following plugins:

    KodiLite, Mediaportal, TSMedia, Backupsuite, JediMakerXtream, MediaInfo, NetSpeedTest


    The receiver will be used for watching channels via multi-satellite use and should be at least a twin tuner.


    Thank you to anyone who can offer any personal experience having bought and is using a receiver that would be perfect for the above.


    Hoping to place an order this as soon as possible.


    Thank you in advance for any help received.

    world-of-satellite.co.uk

  • Elgato HD CN Skin by Kerni mod by CiNo for OpenPLI

    I would appreciate your help please.

    We have installed this skin assuming that the ip address

    would show up on the info bar as shown in one of the pics

    on this thread.

    Are we doing anything wrong or does this skin

    no longer offer this option?

    We are using an OpenPli 7.1 image.

    Many thanks.