Posts by roady

roady · Dec 19th 2015

Sorry, don't know where to post this.

Issue.
I'm running Ubuntu Server 15.10 and have 2 DVBSky S960 connected. I have built the dvb drivers on the computer. When rebooting the computer tvheadend having issues mapping each tuner to same id, so because I'm using 2 different satellites so the channels doesn't work. To make it work I have to disconnect the USB DVBSky and connect them one by one in the right order.

I understand that by having MAC address or serial for each device, you can configure Linux to always use the same usb port id and then the issue should be solved.

However when looking after the MAC and serial it looks like both devices has the same. Any suggestions on what to do?

Code

kidkic@TvHeadEnd:~$ dmesg | grep -i dvb
[   33.588013] usb 2-3: dvb_usb_v2: found a 'DVBSky S960/S860' in warm state
[   33.588165] usb 2-3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[   33.588178] DVB: registering new adapter (DVBSky S960/S860)
[   33.589492] usb 2-3: dvb_usb_v2: MAC address: 00:17:42:54:96:0c
[   33.680487] m88ds3103_load_firmware: Waiting for firmware upload (dvb-fe-ds3103.fw)...
[   34.708990] usb 2-3: DVB: registering adapter 0 frontend 0 (Montage DS3103/TS2022)...
[   34.732009] Registered IR keymap rc-dvbsky
[   34.732113] input: DVBSky S960/S860 as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/rc/rc0/input15
[   34.732167] rc0: DVBSky S960/S860 as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/rc/rc0
[   34.732170] usb 2-3: dvb_usb_v2: schedule remote query interval to 300 msecs
[   34.732172] usb 2-3: dvb_usb_v2: 'DVBSky S960/S860' successfully initialized and connected
[   34.732190] usbcore: registered new interface driver dvb_usb_dvbsky
[   34.852028] usb 2-3: DVB: adapter 0 frontend 0 frequency 0 out of range (950000..2150000)
[   46.712265] usb 2-2: dvb_usb_v2: found a 'DVBSky S960/S860' in warm state
[   46.712384] usb 2-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[   46.712401] DVB: registering new adapter (DVBSky S960/S860)
[   46.713716] usb 2-2: dvb_usb_v2: MAC address: 00:17:42:54:96:0c
[   46.780567] m88ds3103_load_firmware: Waiting for firmware upload (dvb-fe-ds3103.fw)...
[   47.806843] usb 2-2: DVB: registering adapter 1 frontend 0 (Montage DS3103/TS2022)...
[   47.806902] Registered IR keymap rc-dvbsky
[   47.807001] input: DVBSky S960/S860 as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/rc/rc1/input16
[   47.807103] rc1: DVBSky S960/S860 as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/rc/rc1
[   47.807106] usb 2-2: dvb_usb_v2: schedule remote query interval to 300 msecs
[   47.807108] usb 2-2: dvb_usb_v2: 'DVBSky S960/S860' successfully initialized and connected
[   47.876133] usb 2-2: DVB: adapter 1 frontend 0 frequency 0 out of range (950000..2150000)

Display More

roady · Dec 19th 2015

Raspberry won't be able to handle HD channels so better to use an old computer. Got a 6 years old computer and all is running now.

roady · Nov 11th 2015

You are totally correct :)
Now I'm getting
2015-11-11 08:44:34.822 capmt: Oscam connection: mode 5 connected to 127.0.0.1:9000 (single)
2015-11-11 08:44:34.822 capmt: Oscam connection inactive

guessing it goes to inactive because no decoding is running.

roady · Nov 10th 2015

I cannot get Tvheadend to connect to Oscam. Running on Linux.

oscam.conf
[dvbapi]
enabled = 1
user = root
au = 1
pmt_mode = 4
listen_port = 9000
boxtype = pc

camd.socket exist, but looks like it's 0 bytes.
srwxrwxrwx 1 root root 0 Nov 10 09:17 camd.socket

tvheadend log
capmt: Oscam: Cannot connect to /tmp/camd.socket:9000 (Name or service not known); Do you have OSCam running?

tvheadend setting
OSCam net protocol (rev >= 10389)

roady · Oct 3rd 2015

Will post update if/when it's working.

Also forgot to write that Im running on Raspberry Pi 2

roady · Oct 3rd 2015

Hi. Having some issues connecting and getting video.
Using Kodi - tvheadend - Oscam 1.2. Tried a channel with no encryption so looks like everything is setup correctly.

However when trying to run encrypted channel it doesn't work and kodi popup message "no input detected".

This is my config.

Code

oscam.conf




[global]
disableuserfile               = 0
nice                          = 20
maxlogsize                    = 10240
usrfile                       = /storage/oscam/oscamuser.log
cwlogdir                      = /storage/oscam/cw/
emmlogdir                     = /storage/oscam/emm/




# logging




logfile       = /storage/oscam/oscam.log
usrfile       = /storage/oscam/oscamuser.log
cwlogdir      = /storage/oscam/cw




# web interface




[webif]
httpport      = 8888
httpallowed   = 127.0.0.1,192.168.99.0-192.168.99.255
httprefresh                   = 5




[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
user = pi
boxtype = pc







oscam.user




[account]
user                          = pi
pwd                           = root
au                            = 1
group                         = 1
cacheex                       = 0







oscam.server




[reader]
label                         = Reader-0
protocol                      = cccam
device                        = xxxx,port
user                          = username
password                      = password
inactivitytimeout = 30 
fallback = 1 
group = 1 
dropbadcws = 1 
cccversion = 2.1.3 
cccmaxhops = 1 
ccckeepalive = 1







[reader]
label                         = Reader-1
protocol                      = cccam
device                        = yyyyy,port
user                          = username
password                      = password
inactivitytimeout = 30 
fallback = 1 
group = 1 
dropbadcws = 1 
cccversion = 2.1.3 
cccmaxhops = 1 
ccckeepalive = 1

Display More

This is the log from oscam

Code

2015/10/03 12:17:16 00000000 s >> OSCam <<  cardserver log switched, version 1.20-unstable_svn, build r11031 (arm-linux-gnueabihf)
2015/10/03 12:17:16 00000000 s     (main) System name    = Linux
2015/10/03 12:17:16 00000000 s     (main) Host name      = tvheadend
2015/10/03 12:17:16 00000000 s     (main) Release        = 3.18.11-v7+
2015/10/03 12:17:16 00000000 s     (main) Version        = #781 SMP PREEMPT Tue Apr 21 18:07:59 BST 2015
2015/10/03 12:17:16 00000000 s     (main) Machine        = armv7l
2015/10/03 12:17:16 00000000 s     (main) creating pidfile /tmp/.oscam/oscam.pid with pid 2379
2015/10/03 12:17:16 00000000 s   (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/10/03 12:17:16 00000000 s     (main) signal handling initialized
2015/10/03 12:17:16 00000000 s   (reader) Reader-0 [cccam] creating thread for device xxxxxip
2015/10/03 12:17:16 00000000 s   (reader) Reader-1 [cccam] creating thread for device yyyyyip
2015/10/03 12:17:16 00000000 s     (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2015/10/03 12:17:16 00000000 s     (main) waiting for local card init
2015/10/03 12:17:16 659C28C2 h    (webif) webif: decompressed 165266 bytes back into 393840 bytes
2015/10/03 12:17:16 659C28C2 h    (webif) HTTP Server running. ip=0.0.0.0 port=8888
2015/10/03 12:17:16 6BDE74BF p   (reader) xxxxxx: resolved ip=x.x.x.x
2015/10/03 12:17:16 6BDE74BF p   (reader) Reader-0 [cccam] connecting to xxxxx:port
2015/10/03 12:17:16 457FEDA0 p   (reader) yyyyyy: resolved ip=x.x.x.x
2015/10/03 12:17:16 457FEDA0 p   (reader) Reader-1 [cccam] connecting to yyyyy:port
2015/10/03 12:17:16 00000000 s     (main) init for all local cards done
2015/10/03 12:17:16 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2015/10/03 12:17:16 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2015/10/03 12:17:16 00000000 s (anticasc) anti cascading disabled
2015/10/03 12:17:16 08C94310 c   (client) plain dvbapi-client granted (pi, au=auto (2 reader))
2015/10/03 12:17:16 08C94310 c   (dvbapi) dvbapi channelcache loaded from /usr/local/etc/oscam.ccache
2015/10/03 12:17:16 08C94310 c   (dvbapi) Using /tmp/camd.socket listen socket, API forced to DVBAPIv3 (0), userconfig boxtype: 11
2015/10/03 12:17:17 457FEDA0 p    (cccam) cccam(r) Reader-1: login failed, usr/pwd invalid
2015/10/03 12:17:17 457FEDA0 p   (reader) Reader-1 [cccam] proxy initialized, server yyyyy:port
2015/10/03 12:17:17 6BDE74BF p    (cccam) cccam(r) Reader-0: login failed, usr/pwd invalid
2015/10/03 12:17:17 6BDE74BF p   (reader) Reader-0 [cccam] proxy initialized, server xxxxx:port
2015/10/03 12:53:42 457FEDA0 p   (reader) Reader-1 [cccam] connecting to yyyyy:port
2015/10/03 12:53:42 6BDE74BF p   (reader) Reader-0 [cccam] connecting to xxxx:port
2015/10/03 13:08:56 08C94310 c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 0B00 ECM_PID: 1B76 PROVID: 000000
2015/10/03 13:08:56 08C94310 c   (dvbapi) Demuxer 0 found 1 ECMpids and 1 STREAMpids in PMT
2015/10/03 13:08:56 08C94310 c   (dvbapi) Demuxer 0 serving srvid 115E (0B00@000000:115E unknown) on adapter 0001 camask 0002 index 0000 pmtpid 0000
2015/10/03 13:08:56 08C94310 c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0B00 PROVID 000000 ECMPID 1B76 ANY CHID PMTPID 0000 VPID 0001
2015/10/03 13:08:56 08C94310 c      (ecm) pi (0B00@000000/0000/115E/75:A582240AA204B32C403E60903FF94E58): found (76 ms) by Reader-1 (F/2/2/2) (real 75 ms)
2015/10/03 13:09:03 08C94310 c      (ecm) pi (0B00@000000/0000/115E/75:742CC3DD95688E902D725143B8405015): found (350 ms) by Reader-1 (F/2/2/2) (real 348 ms)
2015/10/03 13:09:09 08C94310 c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 0B00 ECM_PID: 1B76 PROVID: 000000
2015/10/03 13:09:09 08C94310 c   (dvbapi) Demuxer 0 found 1 ECMpids and 1 STREAMpids in PMT
2015/10/03 13:09:09 08C94310 c   (dvbapi) Demuxer 0 serving srvid 115E (0B00@000000:115E unknown) on adapter 0001 camask 0002 index 0000 pmtpid 0000
2015/10/03 13:09:09 08C94310 c   (dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 0 
2015/10/03 13:09:09 08C94310 c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0B00 PROVID 000000 ECMPID 1B76 ANY CHID PMTPID 0000 VPID 0002
2015/10/03 13:09:09 08C94310 c      (ecm) pi (0B00@000000/0000/115E/75:742CC3DD95688E902D725143B8405015): cache1 (1 ms) by Reader-1 (cw count 2)
2015/10/03 13:09:13 08C94310 c      (ecm) pi (0B00@000000/0000/115E/75:BE69FE85AE04B11BE49727146554C694): found (414 ms) by Reader-1 (F/2/2/2) (real 413 ms)
2015/10/03 13:09:23 08C94310 c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 0B00 ECM_PID: 1B76 PROVID: 000000
2015/10/03 13:09:23 08C94310 c   (dvbapi) Demuxer 0 found 1 ECMpids and 1 STREAMpids in PMT
2015/10/03 13:09:23 08C94310 c   (dvbapi) Demuxer 0 serving srvid 115E (0B00@000000:115E unknown) on adapter 0001 camask 0002 index 0000 pmtpid 0000
2015/10/03 13:09:23 08C94310 c   (dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 0 
2015/10/03 13:09:23 08C94310 c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0B00 PROVID 000000 ECMPID 1B76 ANY CHID PMTPID 0000 VPID 0003
2015/10/03 13:09:23 08C94310 c      (ecm) pi (0B00@000000/0000/115E/75:BE69FE85AE04B11BE49727146554C694): cache1 (1 ms) by Reader-1 (cw count 2)
2015/10/03 13:09:23 08C94310 c      (ecm) pi (0B00@000000/0000/115E/75:5E003271136DD92EB9E1C0F28535B77F): found (346 ms) by Reader-1 (F/2/2/2) (real 344 ms)

Display More

Any suggestions?

Posts by roady

Linux multiple DVBSky S960 issue

oscam cccam tvheadend kodi issue

TVH 4.0.7 - Oscam 1.2 no CAs connection

TVH 4.0.7 - Oscam 1.2 no CAs connection

oscam cccam tvheadend kodi issue

oscam cccam tvheadend kodi issue