Wetek Play and Wetek Play 2
i will second that have both, wetek play is better 2gb ram and upgrade to marshmallow.
Wetek Play and Wetek Play 2
i will second that have both, wetek play is better 2gb ram and upgrade to marshmallow.
Best box in my opinion is wetek play 2.
Don't bother with upgrade at the moment many issues and cant go back to previous version, wait for fixes is my advice.
I have a motorised dish which I set up very carefully on Thor 0.8 W at the apex of my house. It worked very well for several years but then blew down in a gale. It is no longer possible to re-fit it at the apex of my house or in any position with a view of Thor but I can re-fit it lower down with less visibility. Assuming there is no damage to the motor could I line it up on Astra 2 with a vertical pole and, in theory, have good signals from the satellites within its limited view without further adjustment
Word of advice, if you have fitted a dish that blew down then i would not fit another, 100lb+ steel coming down on somebodys head, will kill, get some proffesional help.?
oto your PC on your web browser type in the ip of box example, (192.168.1.0:8888) on the top line of oscam go to" files" look for oscam server, then fill in as below. with your N-LINE ,restart oscam all should work OK.
[reader]
label = =
description = 28.2
protocol = newcamd
device = your line address and port no: last, 53030
key = 0102030405060708091011121314
user = user
password = password
inactivitytimeout = 1
connectoninit = 1
caid = 0963
ident = 0963:000000
group = 1
start on boot needs to be ticked on the app from within wetek play. .
Can you tell us what do you prefer? I'm using OSCam Manager 1.0.3 and after some hours (3+) the box goes blackscreen or de OSCam crashes... I tried Mega OSTool but can't put it to start on boot. I'm using WeOS 2.0.2 with newcamd lines. I'm going back to OSCam Manager 1.0.2 to check if the problem persists.
Thanks
Hi,
My box has turned on and is now stuck on boot logo. can't work with the remote or turn off with blue button on front.
I don't use the box much, it has VTI image on it for more than a year.
Is there a fix or do I return it to the supplier ?
you have bootloop try another image, vix is good.
try this VU CONTROL CENTRE, http://linuxsat-support.com/sh…ghlight=vu+control+centre
no the epg rytekk i talk off is for kodi m8 :)
u set it of to populate via kodi apps and it will down load a full xlml file and you hopefully can use that as a location that any dvt can grab from
if you get me , not got a play2 as im sure you know im holding out for the Play2s :)
Get what you mean Honcho, but satellite side is miles better on android side, then kodi runs through android side on its own, no need for tvh or vdr, but epg is not fixed for 28.2.
lol aye there all half cracked up there to start with never mind seshing lol ,
if it lets you look for a epg file you can install rytekk epg downloader for android its a kodi app :)
then poss guide the epg location might help :)
Hi Honcho, the epg is on the Android side, wetek built it into the firmware, maybe they can allow us to install 3rd party stuff but e2 no good for this prob, dont they have a freq in lame for e2 settings to pick up 28.2 epg automatically. all other sats have epg.
Hi Honcho, happy new year mate, i was up Dunoon over the new year great crack. As for the we2 its fast and slick, like the way satellite side is independant from Kodi if using Android side lot of new options like channel update online or by usb lame file from any e2 settings, epg has been updatetd except 28.2 which is a biatch nice loaders version 1& 2 early days but looking good.
Latest UK & Ireland Channel List
I think you need to tell peeps which box this channel list is for ? although posted as blade section it doesn't really say on your post
hi,I am new to this...I can't choose beetween a Formuler f1 and Wetek play 2...wich one you people recommend??will have to work with cccam...Thanks.sorry for bad english.
Wetek play 1 or 2 will only work with Oscam.
Hi, I succefully installed Oscam Manager but I'm quite lost. Can you please give me some help how to configure is so I can connect to a share?
Thanks :)
Goto your PC on your web browser type in the ip of box example, (192.168.1.0:8888) on the top line of oscam go to" files" look for oscam server, then fill in as below. with your N-LINE ,restart oscam all should work OK.
[reader]
label = =
description = 28.2
protocol = newcamd
device = your line address and port no: last, 53030
key = 0102030405060708091011121314
user = user
password = password
inactivitytimeout = 1
connectoninit = 1
caid = 0963
ident = 0963:000000
group = 1
The new WeOS (2.0 on WeTek Play 2 and WeTek Hub, 3.0 on WeTek Core) presents its brand new totally re-design user interface that will improve your experience when using WeTek devices.
To download and apply the update directly from your device, simply access WeUpdate app from My Apps select “On-line Update”.
Here’s what you’ll get with the new WeOS:
Brand new dashboard
Aptoide, largest independent Android app store
Multitasking app switcher
General fixes and improvements:
Removed FTP server and telnet
System stability has been overhauled
“Reboot to recovery” is now presented under settings >storage & reset.
WeTV (for WeTek Play2) enhancements:
EPG active scanner
EPG Grid channel change is now possible
Add picons by channel name
EPG grid limit time window
Ability to export dvb.db to E2 file has been added
"NIT" option at is now available for DVB-C/T auto.scan
WeTV (for WeTek Play2) bug fixes:
Fixed bug when naming a bouquet name with special characters
Fixed focus issue when double pressing the yellow button
Ch number is empty in Info bar
Fixed problem with info bar when switching between channels that are locked
Bouquet Managment is now showing correct bouquet list
Fixed a bug with Location selection on DVB-C when not connected to the internet
Fixed a date bug concerning Schedule Recordings
For further information and discussion, please visit our forum.
The new WeOS (2.0 on WeTek Play 2 and WeTek Hub, 3.0 on WeTek Core) presents its brand new totally re-design user interface that will improve your experience when using WeTek devices.
To download and apply the update directly from your device, simply access WeUpdate app from My Apps select “On-line Update”.
Here’s what you’ll get with the new WeOS:
Brand new dashboard
Aptoide, largest independent Android app store
Multitasking app switcher
General fixes and improvements:
Removed FTP server and telnet
System stability has been overhauled
“Reboot to recovery” is now presented under settings >storage & reset.
WeTV (for WeTek Play2) enhancements:
EPG active scanner
EPG Grid channel change is now possible
Add picons by channel name
EPG grid limit time window
Ability to export dvb.db to E2 file has been added
"NIT" option at is now available for DVB-C/T auto.scan
WeTV (for WeTek Play2) bug fixes:
Fixed bug when naming a bouquet name with special characters
Fixed focus issue when double pressing the yellow button
Ch number is empty in Info bar
Fixed problem with info bar when switching between channels that are locked
Bouquet Managment is now showing correct bouquet list
Fixed a bug with Location selection on DVB-C when not connected to the internet
Fixed a date bug concerning Schedule Recordings
For further information and discussion, please visit our forum.
Display MoreHi Guys, I've been an E1 user for years and have just bought an Edision OS mini receiver.
I was doing some browsing here and came accross a download for the linux-sat panel.
I downloaded the two files 1 was a .deb file & the other was a.ipk file.
My question is what do I do with those files, I assume I only need 1 of them, but which one and where do I ftp it to?
I would also like to change the skin to maybe S*Y Q skin or whatever is recommended.
Look for and download vu control centre log in with ip of your box /root/ linuxsat from there you can do all including loading of ipk automatic.
Any help much appreciated.
Look for and download vu control centre log in with ip of your box /root/ linuxsat from there you can do all including loading of ipk automatic.
you mean the release of enigma rom for 2s ?
Sent from Note3 N9005.
wetek have got it right on android side of dvbs so why would you want to go the e2 route.?
Dear Dale, do you know if oscam works with wifi connection on the Wetek Play 2?
I asked the same in another thread but didn't get an proper answer. Many thanks in advance.
i found it would not work, this could be due to low wifi signal and my router is on yards away. works great through lan, get some home plugs, i am using home plugs and works flawlessly.
not sure but think you need developer mode go to wetek settings and keep clicking on build no: until you get developer mode.
wifi will always be prone to interference always best to lan for streaming . home plugs will do the job nicely.