MTN ww have A new hash mode [5] is in use. so we have to watch tomorrow games from a difference source.
Posts by g-net
-
-
for me no works discovery afn yes i have put like this
[reader]
label = emulator
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE
group = 12
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;4AE1:000011,000014,0000FE,0E00:000000
services = !afn
[reader]
label = AFN
protocol = emu
device = emulator
caid = 0E00
detect = cd
group = 3
emmcache = 1,5,31,1
emu_auproviders = 0E00:000000
auprovid = 000E00
cacheex = 1
cacheex_maxhop = 1
cacheex_allow_request = 1
services = afn
Yes m8
Pli-4 with Oscam-emu
Post up your configs bud minus ya ports/users/passes
can u please post emu with working config will be higly appreciated.
I am using - Oscam_emu v11279
Make sure you add the AFN details to your Oscam.services as posted earlier... post #51
heres my configs used for powervuall the details to get this all up & running are here in this thread bud
just read throu ok
Oscam.conf
[streamrelay]
stream_relay_enabled = 0
[dvbapi]
enabled = 1
au = 1
pmt_mode = 6
request_mode = 1
delayer = 60
user = dvbapi
read_sdt = 1
extended_cw_api = 2
boxtype = dreambox
Oscam.server
[reader]
label = emulator
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE
group = 12
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;4AE1:000011,000014,0000FE,0E00:000000
services = !afn
[reader]
label = AFN
protocol = emu
device = emulator
caid = 0E00
detect = cd
group = 3
emmcache = 1,5,31,1
emu_auproviders = 0E00:000000
auprovid = 000E00
cacheex = 1
cacheex_maxhop = 1
cacheex_allow_request = 1
services = afn
hello bro. i have this setup working fine, but i have one problem with [service SID] both afn and mtn ww package have eight of the same SID and i have both services locking on my stb. SID= [0066= MTN MSNBC ==AFN PRIME ATLANTIC], [0067=MTN FOXNEWS ==AFN NEWS], [0068=MTN CNBC ==AFN SPORTS 1], [0069=MTN SKYNEWS ==AFN PRIME PACIFIC], [006A=MTN BBCNEWS ==AFN SPECTRUM], [006B=MTN PRIME JOUNEY ==AFN SPORTS 2], [006C= MTN SKYPORTS NEWS ==AFN FAMILY], [006D=MTN SPORTS24 ==AFN MOVIES]. so i have to change the caheex lines to "0" on AFN reader before the eight mtn ww channels can be clear. i have try some others idea but no result. please i need some expert help here. thanks
-
mtn new hash mode 9 in use now
-
-
I think best solution for Now to install both Ncam and Oscam
Ncam to open AFN and put cacheex = 1 in emu reader
Oscam for other PowerVu Channels and BISS and others
This is not necessary.
To overcome the problem of other emu channels not working with cacheex enabled, do the following.
1. Create an oscam.services file with:
(or add to existing file - making sure "afn" does not already exist...)
2. Create a second emu reader. The oscam.server entries should look something like this simplified example:
Code
Display More[reader] label = oscam_emu protocol = emu device = Emulator caid = 0D00&0F00,090F,0500,1801,0604,0648,0D98,0650,0D95,0E00,1FFF,2600 detect = cd ident = 0E00:000000,000002;0D00:000000,000004,000010,000014,000020,0000C0,000000,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A 8;0D03:000000,000004,000008,000024,000028;0D05:000004,000010;090F:000000;0500:030B00,023800,007400,007800;1801:000000;0604:000000;0D98:000000;0650:000 000;0D95:000000 group = 1 emmcache = 1,5,31,1 emu_auproviders = 0E00:000000 auprovid = 000E00 services = !afn [reader] label = AFN description = AFN-EMU protocol = emu device = Emulator caid = 0E00 detect = cd group = 1 emmcache = 1,5,31,1 emu_auproviders = 0E00:000000 auprovid = 000E00 cacheex = 1 cacheex_maxhop = 1 cacheex_allow_request = 1 services = afn
The last line for each reader specifies to either use or not use the afn services.
This can also all be done through the webif...Note: Some boxes/images do not need the cacheex enabled. So this is ONLY for boxes/images which need cacheex enabled in order for the afn channels to clear.
Note 2: This method also works for tvheadend...
Note 3: If you have some other powervu channels which use the same srvid as one of the afn channels, they will probably not work. (thanks to nautilus7 for reminder...)
thanks sir. yes is true if the same srvid is use by two difference channels from difference provider one of the channels will not work, like afn movie and mtn sports 24 both used 006d after I remove this from afn service sports 24 clear, so I don't know what be the solution for this.
-
I have the same problem, I receive promotion email from world of satellite uk and try contacting them but the don't ship to my location. if you want lean to be the best buy the best. I don't want to buy china clone receivers
-
hello master G. thanks for your leadership, the last time I ask for help to setup card sharing with a local cable card but I didn't continue the quest due to some setback. and now I want to begin the journey. to start with I already plug my card in my box and is clearing all the channels. all I need now is to have a setup to run on my other receivers. thanks
-
You can`t view powervu with regular oscam, you need oscam-emu with updated keys..
Which cable card do you have ?
Which linux receiver do you have ?
Which image / firmware is on it ?
Once we have the above info, we can direct you to the correct oscam-emu..
You can check the log on the oscam web interface which should give us some details about your card, then we can give you some configs to try..
Thanks master G. I have DM 800 hd se with open atv image on it and solo pro v3 with openpli image I think this one is a clone box. The card I m using is conax CA use by some local cable company but the are using ku-band modulator. So you can use any satellite receiver to get them. Do I have to log from pc or my receiver? Don't var me I m here learn.
Sent from my iPad using Tapatalk
-
Hello to all, I say thanks to the masters of this great forum.
Sent from my iPad using Tapatalk
Is good to ask for directions to find your will out. I being around for a wild reading through the forum, is little bit harder to understand everything as one. This is my first time to work with Linux receivers so I m little bit out of line in this zone. I m trying to get Oscam but I need to know where to start from, as a new user to Oscam what you have to do to start using Oscam for the first time? The are two reason why I want to start using Oscam for what I have read so far, I want to use Oscam to view powervu channels, and I have some local cable company smart card that I m using in some FTA receivers that I want to share within my compound to family, these cards are free to use with any receiver But the don't have any info on Oscam website, so I need the right files and step to work with. Thanks for the help TCS
Sent from my iPad using Tapatalk
-
thanks brother. I don't know what to do with this card now, I m out of the zone to get help from there customer area.
-
Hello friends, pls I m a newbie on this hobby, I have a b**nsports card from my foulty receiver that I want to use on my dm-800hd se v2 internal reader, I m running open atv on the box, I need the right Oscam.server and cccam cfg that will work with the card on the box. Pls show me the way out. THANKS for the help to come.
-
pls i want to understand some thing if i have a smart card that i want to use with my box, do i need a particular softcam for that card or multi one?