Don't think there is need for multiple au entries, just place a comma between them, eg:
Works ok for me
Great thanks buddy
Don't think there is need for multiple au entries, just place a comma between them, eg:
Works ok for me
Great thanks buddy
sorry to sound dumb but in oscam.user can i have
au= SKY
au= MTV
for example?
it does work bud ,,,I found best /quickest channel to receive emms is mtv music 24..
If box is full restarted on this channel the requests are immediate..
You sir are a hero !! thirty seconds after tuning to MTV24 it works. I activated in using spark to make sure it got activated correctly. Just walked the code into E2 and that also works. Im assuming it doesn't need new entitlements until my pre-paid subscription ends or does au need to be set to on?
Thanks
Sorry to drag up an old post but did this ever work? Mine is doing exactly the same (showing no entitlements) and my configs are identical.
I have entitlements that expire 01-01-1990. EMM's are being received but nothing seems to be updating.
I've paired another of my viewing cards to the box i have the boxid for. Rebooted OSCAM but still no entitlements. Any more ideas anyone?
- - - Updated - - -
Sorry to waste you time guys but it was me being a moron. For some reason known only to me i had spelt GROUP with an E on the end. All working now.
Thanks again
I'm at work at the moment. I'll post them tomorrow morning provided I remember.
- - - Updated - - -
The following is what i used to get mine working. I have a red s*y uk card and an official TN*SAT card. This worked fine in my Amiko Alien2+ (although i currently have an issue with sky entitlements but thats because i had the card out the box for a few weeks). I don't have a FRANSAT card so can't vouch for that.
*** OSCAM.USER ****
[account]
user = localuser
group = 1,2
*** OSCAM.SERVER ****
[reader]
label = SKYUK
protocol = internal
device = /dev/sci0
caid = 0960
boxid = ****
cardmhz = 2700
mhz = 450
detect = cd
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
saveemm-u = 1
saveemm-s = 1
[reader]
label = tntsat
protocol = internal
device = /dev/sci1
caid = 0500
detect = cd
mhz = 450
cardmhz = 2700
ident = 0500:030B00,FFF400
aeskeys = 0500@030B00:0,0,0,0,0,0,0,0,0,0,0,0,0,2504B382B16D8C6758DB960E311E9351,0,0,0,F62C3BE300E98BBB378DFA38BB6EEEF1,0,0,6B1B024D36F60974973CB81FA5E8F01C,0,0,1DE5B042AD670BB16A3A76BDAD2F7AC0
group = 1
*** OSCAM.DVBAPI ****
P: 0500:030B00:2013:04A9 # TMC
P: 0500:030B00:2027:04A9 # TMC
P: 0960:000000
Hope this helps
The short answer is no. I have been trying for 5 years to get TNTSAT or Francesat cards working. You can bits here or bits there but I have found it impossible to put it all together. I used to use an Atlas and F lined it to my VU+ but for some reason Atlas no longer reads the cards so I am having yet another go. How have you fared, benwiddowson? Or can anyone else point us in the right direction.
?
I managed to get TNTSAT and Sky both working on Oscam mate. Would it help if i post my configs?
That link doesn't work buddy
Weird thing is that it works fine and clears everything in the official skybox. It's just in the alien it doesn't clear.
We will need more info bud..... is this a white or red sly card? what sly receiver is the card paired too?
Sorry for the lack of info, i was mid rant at the card. Its a red card out of a DRX890 (cable). Its in an Amiko Alien running the SH4 version of OSCAM. Stuff like the box id are correct (unless they have made any changes in the last 2 weeks since i last used it).
Hope this helps
ben
Hi
I've just switched back to using my official sky card in my alien2. Updated all the oscam files but i now get error no entitlements. I've put the card back in the original sky box for an hour or so and tried a repair but nothing. Any ideas?
I've tried changing them and now i get LB VALUE = Invalid MS on the txt channels and they don't clear but i get ok on the sky stuff and they clear
Hi
I have an Amiko alien2 with two cards (s*k in the top slot and tntsat in the bottom) running vix and oscam. The Sky channels are clearing ok but the TNT's are not. In the web interface they both show the correct number of entitlements and no errors. If i remove all references to the sky card from all the oscam files then the TNT's clear ok. I've posted my configs below. Could one of you take a look and let me know if you spot anything thats stopping it clearing.
Thanks
QuoteDisplay More
oscam.conf
[global]
nice = -1
logfile = /var/log/oscam.log
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1
[dvbapi]
enabled = 1
user = linuxsatsupport
boxtype = dreambox
au = 1
[newcamd]
port = 10001@0960:000000
key = 0102030405060708091011121314
keepalive = 1
[cccam]
port = 12000
version = 2.1.3
build = 3165
reshare = 1
[webif]
httpport = 8888
httpuser =
httppwd =
httprefresh = 15
httpallowed = 192.168.0.0 - 255.255.255.255
debug = 255
[monitor]
appendchaninfo = 1
oscam.dvbapi
P: 0960:000000
P: 0500:030B00:2013:04A9 # TMC
P: 0500:030B00:2027:04A9 # TMC
oscam.server
[reader]
label = SKYUK
protocol = internal
device = /dev/sci0
caid = 0960
boxid = ****
cardmhz = 2700
mhz = 450
detect = cd
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
saveemm-u = 1
saveemm-s = 1
[reader]
label = tntsat
protocol = internal
device = /dev/sci1
caid = 0500
detect = cd
mhz = 450
cardmhz = 2700
ident = 0500:030B00,FFF400
aeskeys = 0500@030B00:0,0,0,0,0,0,0,0,0,0,0,0,0,2504B382B16D8C6758DB960E311E9351,0,0,0,F62C3BE300E98BBB378DFA38BB6EEEF1,0,0,6B1B024D36F60974973CB81FA5E8F01C,0,0,1DE5B042AD670BB16A3A76BDAD2F7AC0
group = 2
oscam.user
[account]
user = linuxsatsupport
group = 1,2
caid = 0960
ident = 0960:000000
au = SKYUK
[account]
user = localuser
group = 1,2
Can I confirm its the Vu+ Solo SE V2 Twin Tuner DVB-S/S2 Linux HD PVR, I've found it on world-of-satellite for a decent price (about 150). ?
- - - Updated - - -
i'd use a use stick for swap file, epg and picons
Looks like it's a usb hub then as I hate stuff in the front socket.
the crashes on hdmu are usually due to lack of memory, needs swap file to run at its best
Can the same HDD be used for swap and recordings. Im assuming it on,y allows ext3 and 4 for swap?
I am currently using this version of HDMU (with my hacked pti module) and have had no problems. http://linuxsat-support.com/showthread.php?t=97793
Download pti.ko from here (ver 217) and replace the existing file in /lib/modules (and reboot...)http://linuxsat-support.com/showthread.php?t=82978&p=269966&viewfull=1#post269966
Im thinking i might have a hardware issue as that images works fine till i try and enter the HDMU Centre then its just crashes every time.
i followed the link from the Lavatronics download centre for the gigablue ipbox
- - - Updated - - -
A new USB stick and it worked. Thanks again.
Hi
I have a gigablue ipbox running vix4. I want to flash the dam thing with a different image. How is this done? So far I have a usb stick with the image on it but the box won't seem to read it on boot. I've been told I have to wait for a purple light then press ok but the box just boots into vix4.
Thanks
I bought and sold 3 aliens in the end (no not the illegal type :13_002:) the picture quality has never been beaten on any other box i have used and despite its issues i wouldn't mind having another one. if you really dont like to mess about and keep fixing things then Have a look at the technomate nano TM3.
I would rate that better than the solo2 for rock solid stability, the tuners are better on weak signals and i much prefer the TM's remote to the solo2.
IS the TM enigma 2?