thanks will give it a go
- - - Updated - - -
just had a new box delivered (for my sister) and it seems to be the same, Tuner A ok Tuner B no signal (set up tuner A simple 28.2deg, tuner b equal to A) Am I missing something? should they both not have signal lock??
Hi
I have an issue with my 2S tuners only showing lock on tuner A unless I set tune to user defined in satfinder, however it reverts to predefined when I come out and go back in and has no lock again.
thought it was my image (openatv 5.3 with slyk1 skin) but have the same issue with a brand new one straight from the box. I have swapped sat feeds over but issue is still there. what am I doing wrong?
Hi
Have this problem ,where tuner B will not get a signal on satfinder ( when tuner b selected comes back tuner failed)
have checked cabling (swapped a to b, issue stays with tuner b) and tried different settings but to no avail.
anybody no what is wrong? or is it hardware
Hi
I have issues where the storage, be it SATA HDD or USB flash just disappear
I mount, makdir, chmod and all is good, run crossepg to use usb/hdd for download but then when it completes, the storage device is no longer selected (back to internal) and on checking FS can no longer see device (though if you go to harddisk settings you can still initialise it)
have tried numerous Firmware and it happens on all of them, currently on openpli
has anybody managed to solve this ?
no, just ease of setup, had issues opening ports to test connections and was going to lock down once I confirmed all was good! had hassles before opening ports on virgin hub
I had it in dmz but have since reflashed and removed from dmz but still the same
Hi
as described in title, cannot get FTP to work, reports the following error
500 OOPS: vsftpd: not found: directory given in 'secure_chroot_dir':/var/share/empty
Worked on initial install of flash image, copied on ,ipk's for autobouquet, crossepg and mgcamd 1.38. rebooted and now get the error, Telnet works ok and logs in but not great on cmd line programming!! (ipk's installed and running ok)
anybody seen this or knows how to resolve ( I have reflashed from scratch again but get exactly same message after reboot)
- - - Updated - - -
incidently, I did check the path and the empty folder was there and was empty when I could ftp
I did
but sorted now! being a numpty installed the image in Bt4 not freebox!!
installed correctly and now working!
live and learn!!
thanks for your help Pauldb
its worth a try! thanks I'll give it a go and let you know!!
- - - Updated - - -
No joy. found the file and copied it over, rebooted but nothing GRRRRR!!
its via HDMI, have checked and audio set to PCM. is there a codec or something required to be installed with open pli?
Hi
Tried quite a few open pli images on my box but don't get any audio! tuner and picture is fine as is cam, happens on all channels!
Has anybody experienced this? if so, how did you resolve it?
works fine on nebula image but keep randomly loosing site of HDD so need an image that has a stable HDD config!
Hi
I have successfully loaded the Nebula V3 image on my Nbox 5800sx, and set tuners and network up ok. I have installed oscam and it is running. however when I configure the oscam.server file with my nline it doesn't decode. (the nline worked ok on box before the change) I have stopped and started oscam and rebooted box too but still not working.
on the http gui it shows connected but status as off (?)
can anyone help?
I have attached the screenshot of http gui and oscam.server is pasted below (obvioiusly without login details!!)
# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9071
# Read more: http://www.streamboard.tv/svn/…/doc/txt/oscam.server.txt
[reader]
label=xxx
protocol=newcamd
key=0102030405060708091011121314
device=xxxxxxxxx:xxxx
Caid = 0963
user=xxx
password=xx
inactivitytimeout=1
reconnecttimeout=30
group =1
audisabled =1
#below is for C, example, if only use N line just change "enable" from "1" to 0
[reader]
label = cline1
enable = 0
protocol = cccam
device =
user =
password =
inactivitytimeout = 10
reconnecttimeout = 3
group = 2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
cccversion = 2.1.3
cccbuild = 3169
cccmaxhops = 5
ccckeepalive = 1
cccreshare = 0
cccreconnect = 5000
audisabled = 1
- - - Updated - - -
I have read through the ccam oscam question previously posted and used nano provided oscam files (edited with my details) but still not decoding.
below is a snippet of debug log via http gui
2016/02/05 9:16:44 2552 p02 proxy myacc:11111 newcamd525 (fd=5)
2016/02/05 9:16:45 2553 c01 dvbapiau (0961&000000/10CE/63:C010): timeout (1700 ms)
2016/02/05 9:16:45 2552 p02 proxy myacc:11111 newcamd525 (fd=5)
2016/02/05 9:16:46 2552 p02 proxy myacc:11111 newcamd525 (fd=5)
2016/02/05 9:16:46 2553 c01 dvbapiau (0960&000000/10CE/63:C010): timeout (1621 ms)
2016/02/05 9:16:46 2553 c01 dvbapi: try pids again #1
2016/02/05 9:16:48 2552 p02 proxy myacc:11111 newcamd525 (fd=5)
2016/02/05 9:16:50 2552 p02 proxy myacc:11111 newcamd525 (fd=5)
2016/02/05 9:16:50 2553 c01 dvbapiau (0963&000000/10CE/63:1979): timeout (1701 ms)
2016/02/05 9:16:50 2552 p02 proxy myacc:11111 newcamd525 (fd=5)
2016/02/05 9:16:52 2552 p02 proxy myacc:11111 newcamd525 (fd=5)
2016/02/05 9:16:52 2553 c01 dvbapiau (0961&000000/10CE/63:1979): timeout (1701 ms)
2016/02/05 9:16:52 2552 p02 proxy myacc:11111 newcamd525 (fd=5)
2016/02/05 9:16:54 2552 p02 proxy myacc:11111 newcamd525 (fd=5)
2016/02/05 9:16:54 2553 c01 dvbapiau (0960&000000/10CE/63:1979): timeout (1603 ms)
2016/02/05 9:16:54 2553 c01 dvbapi: try pids again #2
2016/02/05 9:16:56 2552 p02 proxy myacc:11111 newcamd525 (fd=5)
2016/02/05 9:16:58 2552 p02 proxy myacc:11111 newcamd525 (fd=5)
2016/02/05 9:16:58 2553 c01 dvbapiau (0963&000000/10CE/63:DF21): timeout (1680 ms)
2016/02/05 9:16:58 2552 p02 proxy myacc:11111 newcamd525 (fd=5)
2016/02/05 9:17:00 2552 p02 proxy myacc:11111 newcamd525 (fd=5)
2016/02/05 9:17:00 2553 c01 dvbapiau (0961&000000/10CE/63:DF21): timeout (1603 ms)
2016/02/05 9:17:00 2552 p02 proxy myacc:11111 newcamd525 (fd=5)
2016/02/05 9:17:02 2552 p02 proxy myacc:11111 newcamd525 (fd=5)
2016/02/05 9:17:02 2553 c01 dvbapiau (0960&000000/10CE/63:DF21): timeout (1680 ms)
2016/02/05 9:17:02 2553 c01 dvbapi: try pids again #3
2016/02/05 9:17:02 2553 c01 dvbapi: can't decode channel
still need help!!!
