Posts by linoobs

  • My powervu linux streaming setup II. (TVHeadend)

    have installed tvh from deb and then replayced bin file with your from first thred and become this error from OSEmu

  • Tvheadend with extended_cw functionality (powervu)

    Hi joeuser, i have compiled tvheadend from this link by ./configure --enable-bundle, so then have did all by your "setup II", but become by OSEmu

    Code
    [Emu] error: stream client 0 got 401 response from stream source


    any idee what i have wrong done? or is it problem with OSEmu?


    PS. which country do you live?


    Rgds

  • My powervu linux streaming setup II. (TVHeadend)

    Hello, I confirm, does not work on tvh 4.0.8 as on tvh 4.0.9 and on 4.1.x. So on 4.1.x error 401, and on 4.0.x it found channel, video and audio foud correct too, but does not encrypt, EPG show, but it is all. I am not sure, is it problem on keys, or osemu.
    To joeuser: can you confirm, is it work by you?


    Rgds

  • My powervu linux streaming setup II. (TVHeadend)

    Quote from joeuser

    I understand their position and what they suggest is possible, but adds another loop through TVHeadend to accomplish. Actually, I already setup the SAT->IP channels for AFN so I can use TVHeadend to record (and use the epg to autorec...) I did test and you can play through this extra loop, but did not look to see how much load it puts on the system???


    As i wrote, on 2 MAG250 with Stalker MW on server, channels playing correct. I did test too, but with Astra restream and PID Filtering, it works and load 4% CPU for 2 channels, more i did not tested, i think it will be not more as usualy astra takes. Thx and merry christmas.

  • My powervu linux streaming setup.

    i had such problem, if i write channels in mumudvb config manually, i dont like this line "autoconf_sid_list=43", so maby try config from first post archive

    Code
    mumu_init.auto.2.afn.conf

    change only settings for receiver.

  • My powervu linux streaming setup II. (TVHeadend)


    Answer from Tvheadend: "You have a very special config (powervu). I think that you have PMT rewrite turned off in the pass through streaming profile, don't? The PMT rewrite removes the selected elementary streams, but you need the full PMT table to do powervu descrambling. If you like to do any filtering, you should route the descrambled stream back to TVH and do filtering on it with 'PMT rewrite' on or with the matroska output.."

  • My powervu linux streaming setup II. (TVHeadend)


    it work allready 3 month with mac adress and astra and this

    Code
    options tbs_pcie_dvb adapter_nr=2,3,4,5,6,7,8,9

    work too, 3 times rebooted. Many thanks.


    Rgds

  • My powervu linux streaming setup II. (TVHeadend)


    there is no used info

    Code
    Kernel driver in use: TBS PCIE

    with this it did not work, but with this

    Code
    options tbs_pcie_dvb adapter_nr=2,3,4,5,6,7,8,9

    does, thanks. By the way this command line

    Code
    dmesg | grep -i dvb

    show not many info

  • My powervu linux streaming setup.

    i think it is bad url try

    Code
    http://192.168.2.254:17999/1:0:1:2B:B:16:0:0:0:0:

    for play in vlc
    to finde correct SID see mumudvb log, or use this satellite site

    Code
    http://en.kingofsat.net/satellites.php

  • My powervu linux streaming setup II. (TVHeadend)


    i have it tried and "Anothe Filters" too and they working exactly as you discribed, that s why i wrote not working properly, i use Stalker MW as server for 2 MAG250 they play OK, but the third is XBMC with simply playlist and i must switch audio channel from eng to rus every time after switching the channel.


    Thanks to all for help.


    - - - Updated - - -


    to: sabal9


    ok will try, but how can i finde driver name, exactly what should i write? i have 2 b2c2 skystar2 and 2 tbs6905 with 4 tuners each card.



  • My powervu linux streaming setup II. (TVHeadend)

    it works great, thank you!
    have some questions, i have 10 dvb-s cards installed, 6 of them used by another software by MAC adress, 2 not used now and 2 i use for tvheadend for 2 differet satellites, after systems reboot, all cards changed their numbers (adapter0, adapterX) and now i have a problem, because tvheadend used adapter numbers. Does anybody know, is it possibly on tvheadend bind adapters by mac, or in ubuntu 14.04 hard to bind numbers?
    And one more, is it possibly to cut some audio pids from streamed channels, so it stream only with audio channels wich i need, or change number of audio channels? Config -> Stream -> Audio Filters does not working properly.

  • My powervu linux streaming setup.

    Quote from joeuser

    To use another transponder at the same time, you need another tuner, another instance of MuMuDVB (using a different listening port) and another instance of OSEmu (using a different listening port.)


    Or better yet, use TVHeadend and just one oscam-emu/osemu instance to access all tuners.


    Many thx for your job!

  • My powervu linux streaming setup.

    it shuted down on night, because nobody showing, ok will try somthing, one more qestion, hot can it stream more then one transponder, i run one more mumudvb, but osemu did not know sids from another transponders.

  • My powervu linux streaming setup.

    wow! it works with mumudvb, great job! thank you very much! how did you auto run mumudvb and osemu on system booting? i tried with monit, but mumudvb and osemu did not create pid files, monit can not monitoring, although i run they from root.

  • My powervu linux streaming setup.

    i found one more thing, on 0.8°W Thor 6 Discovery Network 12303 V show all channels, but without sound wich with AC3 soundtracks are. The same problem is on dreambox with oscam too. Log from osemu

    Code
    [Emu] stream client 0 connected
[Emu] stream client 0 request /1:0:1:A28:B:16:0:0:0:0:
[Emu] stream 0 found pmt pid: A82
[Emu] stream 0 found ecm_pid: 1F7C
[Emu] stream 0 found video pid: A28


    PS. wish all good in the new year.

  • My powervu linux streaming setup.

    OSEmu whith mumudvb work fine, but i want use astra to stream channels and dont shure, thet i do it correct. So this is log from osemu_mumudvb whith mumudvb


    this is log from osemu_mumudvb by streaming with astra

    Code
    http://127.0.0.1:4242/bysid/900


    adn this is log from normal osemu

    Code
    OSEmu version 728
reading key file: ./SoftCam.Key
starting thread emu stream server
emu stream server thread started
[Emu] info: FFDecsa parallel mode = 128
starting thread emu stream client
emu stream client thread started
[Emu] stream client connected
[Emu] stream client request /1:0:1:384:B:16:0:0:0:0:

    it is the same, if i use this url for streaming

    Code
    http://127.0.0.1:4242/1:0:1:384:B:16:0:0:0:0:

  • My powervu linux streaming setup.

    thx for reply, i run this command, but it show me nothing, there is nothing to run

    Code
    root@streamerpc:/home/a/osemu# netstat -antp |grep 4242
root@streamerpc:/home/a/osemu#


    sorry, have foud a problem, it was port 1234, because i have running udp streaming by astra, it works, many thx.


    - - - Updated - - -


    i have a question, i want use astra as stream, instead mumudvb, which stream name for channel should i write? i have tried http://127.0.0.1:4242/bysid/900 it is for SID 900 Discovery Ukraine on 4,9E Astra, VLC seems get stream http://192.168.0.100:17999/1:0:1:384:B:16:0:0:0:0: but it show nothing, like not decrypted. Thx. Rgds

  • My powervu linux streaming setup.

    Hello, can you pls write step by step, what should i do to get it working, mumudvb worked and already cesbo astra working, so after

    Code
    ./OSEmu -v -a user:pass -p1234 -s 127.0.0.1 -r 4242:17999

    i get this

    Code
    a@streamerpc:~/osemu$ ./OSEmu -v -a user:pass -p1234 -s 127.0.0.1 -r 4242:17999
OSEmu version 728
reading key file: ./SoftCam.Key
starting thread emu stream server
emu stream server thread started
Could not bind to socket.
a@streamerpc:~/osemu$

    if i run oscam, there is no stream relay.