Posts by cazuela

Best try different versions to see which best suits your needs..
CCcam - All Versions Download Here

Quote

The programmable tuner is more important than the price

I was curious about this tuner type so I´ve just read up about this particular tuner:

Quote

This will only work with dreambox receivers that have been outfitted with a programmable tuner. Such receivers are designated with a "+" such as the DM800HD+ or DM800SE+ or DM7020HD+, etc. This software will NOT work with dreambox receivers that only use a regular tuner that cannot be programmed (e.g. DM800HD, DM800SE, DM7020HD). To determine if your receiver can be programmed, check the rear panel: it should contain a USB tuner port that is clearly labelled. If you don't see such a port, then you are out of luck.

Keep in mind that this software programs the tuner and not the firmware of the receiver. You may keep the default factory firmware or update it to take advantage of new features, but always remember that the descrambling of the channels happens inside the tuner.

I have already pointed you to them twice already!!
Here you have all versions of CCcam
CCcam - All Versions Download Here

Click the mouse over this link and read all the posts from start to finish:
Thread: Install CCcam 2.2.1 dream elite or Blackhole images

Quote from per-hallvard

how to find cccam on this image?

If it has been previously installed ,you will probably find the CCcam.config in /ETC
If it´s not there then install it, it only takes a few minutes..

Thread: Install CCcam 2.2.1 dream elite or Blackhole images

Could be image dependent alright.. Make a full backup of what youve got set up now on openpli.
Lash on a BH image or a backup and set it up just for soarsat and see what happens..
Merry holidays to you too bud !!

where are you getting these lines from bud?? I´d like to try one out see if it gives same result..
Best bet would be to run a backup you made ..

Quote from vrc5

can wetek boxes do (CS) ?

You really need to read some more about the capabilities..
In a nutshell, Yes, they are capable ..

Quote

I have a VUSolo2 running blackhole and enigma2 cams 2.3 (I have 4 of these installed and I have cycled through them with the blue button)

But have you restarted CCcam2.3.0 ??

Quote

I am using an N Line that I have tested in testious and I am getting all green with this.

That really doesn´t mean anything except that the server is online,,not necessarily giving permission to the user/password....
Ask whoever you got the line from..
and before you post anymore I strongly suggest you read the rules as they may have been amended since you were last on..

FTP to ETC/TUXBOX to check if the terrestrial.xml is present ..

Instead of setting tuner B with same config, why not try equal to A..
You could also take a peek at others´setups : Forum: Tuner Support

Please tell us your complete setup ,from LNB to type of box and include how you set up the tuner configurations

Quote from verbal_666

BH 3.x.x is shit. Go back to 2.1.7.

That´s very informative !!!!!
Since Nov 2012 registered and with only a SECOND post like this, do you really think it was worth posting??
This site has been built up from experiences both negative and positive, trial and error, sleepless nights and a lot of patience..
But your post has to be Nº1 in the useless posts chart of 2015 at the very least!!
Please try and be a little more constructive: i.e. exactly why you consider the software to be worthless, which STB,emulator,etc..
I, for one ,would like to see more of your contributions towards a better software.

I imagine you mean USALS in which that is entirely up to you .
I have USALS setup on as I have the pole, dish and motor correctly aligned.
read a few threads about it then try it out yourself.

As you can see , we have just about most interests covered, including the NAVBAR at the top and SEARCHBAR top right..
We also have the very best of channel settings on site and also on our Addons....
1b6af1f2d8ef0c21.jpg

Maybe I missed this part ,,, but you didn´t mention the size of dish you are trying to receive the signal..
Just because satfinder gives you the information of alignment it won´t tell you if you are within the footprint...
I have encountered similar problems residing in Spain....
It might help if you have channel settings ( I use catseye all sats) already in place on the image too...

Quote

Thanks for info was it really necessary to call me a walk?

It wasn´t directed at you at all !!!
But there´s no other reason for viewing that "dribble"...
pun intended... :trbtjrjq::hmmm:

Crashing ?? very seldom.. Freezing , yes , depending on new/recent release and time of viewing.....
Trick is to find an alternative server or time to view.... usually compromising quality of cam and/or server...
Another route you could look into is KODI on your pc/smart tv.. which is less problematic...