good job!! you persevered and got there in the end !!
with TS panel you now have access to our linuxsat-support Addons which you will find very user friendly !!
Posts by cazuela
-
-
no i dont thinks so how do you do it, i am sorry for not knowing much about how this system works, if you can give me a few steps on how to do that part as i think that is were i am going wrong. thanks
Everything that you need to do to install an IPK is in post #2 buddy... you only need to follow the steps...
open DCC - first got to FTP on left window pane you might see var-open this folder,inside you might see volatile-open this folder, inside you should see tmp.
using hte arrows inbetween the 2 window panes you can transfer the IPK to tmp folder...
then open telnet and write this command : opkg install -force-overwrite /tmp/*.ipk
you should see the process happening in the telnet window..
restart box ,then look in manu- plugins -
Quote
Then I configured a C line in the "cccamd.list" file in the directory /var/keys"
Your first post should have been in INTRODUCTIONS bud,,
Why would you put it there ????
All Clines + Flines are added to your CCcam.configuration in etc/CCcam.cfg. make sure CCcam is activated + running press BLUE then use arrows..
Start reading Getting Started - Flines & Clines For Beginners then continue reading all the tuts
if you want to get the maximum from your box.. -
I´d also take from this the lesson of being sent ot the shed to watch on a tm whilst the boss uses the duo....:34_002:
Especially knowing you in person !!!( mind you I´m in my converted garage for peace of mind)
Apart from that it really is hard to believe alright...
I imagine you had tried reflashing the image on the duo to rule out all soft possibilities?? -
another alternative is using xbmc which can be used on linux,( but not enigma although there is a modded version but is not the same) mac,android ,etc....
and by installing the right repositories( addons) you can get constant feeds of streams ,etc.. -
Right I contacted the manager of the cline, he said that he has issues....
I will keep running your config and hopefully I will get the new EMM.
Do I need to keep the decoder on the channel of the card or I can just watch other channels in the mean time?Thank you anyway for you help :)
Manager of Cline ?' What is that buddy?? YOU mean your peer ...well if he has issues there´s not a lot you can do except choose not to continue ...
To recieve emms the card needs to be left on a subscribed channel,,
if it´s not then it won´t recieve through sat unless you have your configuration setup to receive from another peer(s) -
The oscam-ymodv18-52_blackhole working excellent.
But when I use the enigma2-plugin-cams-oscam-ymodv18-51-cccam-2.3.0_blackhole_all.ipk , oscam-ymodv18-51 does not work well.
thank you
Thanks for the feeedback buddy but don´t you think its about time to introduce yourself properly in introductions ? -
hi tried to watch on demand and its gone to green screen ,openpli3 oe2 clone image
thanks anyway for this plugin
Wouldn´t hurt to pass by introductions as first post either bud ..... -
As it is in the plugins no longer supported section it probably doesn´t have up to date links.
It was posted April 2012.... also note that it is mipsel.rar ( oe1.6) -
Check all connections, cable line as annie12 wrote , swap the boxes or cables around and see if it solves the problem...
-
Just an update, managed to get Mag250 to play rtmp files by starting the line with
ffrt2 rtmp://
yep, that´s what it says in post #21 ....
but I Ihave also read that if some of the streams are down then it disrupts the whole list..I can´t confirm this though.. -
After a long a time, and trying several USB-sticks, I discovered that I didn't copy the whole folder /xp1000. I am ashamed, after all these yeasr of flashing :06:. And it flashes in one go now....
Thanks for all your comments!
No shame in that buddy,, it happens to most of us!!!!
Sometimes it´s so obvious in front of us that we simply just don´t see it ( in my case ageing eyes )
But you got there in the end , so good job and case resolved!! -
Depends on a lot of things ,,small details like ,
what image and version you are using ,which STB are you trying to obtain it on,
have you tried the fix, etc, etc...
what you have tried so far and what you haven´t according to other threads on same subject.... -
another option you could try, using BlackHole set up Teleportation function, I have a swap file and teleportation set up on 2 genuine vu boxes, The Ram is nearly always round 90% anyway, the box will only transfer to the swap file when it needs to, whereas using flash expansion it starts to transfer on boot..Teleportation is easy to set up,within the image, an alternate image is created, in your alternate image you can add plug ins they're stored on a usb, these additions will only exist in the alternate universe, you can jump back to your original image at any time, just an alternative for you
I also use BH universe living in AVALON on an UNO ,the space on a 4gb stick is more than enough incl. all those heavy plugins like HBBTV...
Difference with this method is it takes a few seconds more to boot up but no need for flashexpander or skinmover plugin or swapfile or the likes.. -
Hola mi pregunta es se puede pasar la señal de un decodificador satelital limesat a xbmc asi como lo hacen con la enigma2 de drambox , si es asi por favor diganme como se los agradeceria y aportaria mucho a la comunidad ya que ser asi puedo pasarles la señal de ***
HI, my question is if it´s possible to send the stb signal to xbmc like from dreambox e2 , if it´s possible i would be grateful if somebody could explain so I can share it with my local community.
First of all I would imagine it is possible if you use LIVETV repository on XBMC then look for the pvr ( stb ) to add....
Two basic points to consider : the XBMC viewer can only watch whatever channel/transponder the stb is set on...
to share through a community means using an external IP( internet) so the server would need a dns host or a static IP..
Before anything else you need to pass by introductions which is usually first post..
and also use ENGLISH language for the benefit of all users( translator)
un saludo -
Once you set the networking correctly you can enjoy within your intranet and also internet if you wish to do so as long as the card supports it...
perhaps you only need oscam working on the first box( server) and CCcam on the other two boxes(clients)again depending on your card...
The more info you give in posts the more help users can give... -
Have the newenigma2 4.0.1 image. I can see the various CCcams on the tv through the blue buttom\newenigma2services\emu or by looking at the - packages (ipk) installed - With the DCC int etc\ there is CCcam config file. i have opened that with notebook and there is all sorts of bable??? The page is very very wide. Should i delete what is in that config file and use something else????
You need a certain amount of information within your CCcam configuration file to make it compatible...
CCcam.cfg file for newbies
But I have just seen your other thread which you are asking about oscam....
so perhaps you need to clear up what your intentions/plans are....otherwise its confusing,, to me at least.. -
on sat eutelsat w3a so i want to watch it . i cheek one seuveur how hosting it
as rami has already stated ,, we are doing our best to make sure there are no pay servers on this site so it is clean and for hobbyists only...
I suggest that if you want to view that platform then you should either have a valid subscription card or another to exchange with somebody who does.
I also suggest you read the rules buddy.. -
@ Tiger - I hope for your own sake that all that info is false...!!!!!! as it´s too late for anyone to edit it now....
-
Good news buddy-- keep us up to date of how it performs etc.. a review if you get the time ..
