Posts by Mersad_Maral

Hi..

I'm a new user

I have installed Ncam 6.6 on my receiver (UNO4Kse) running BH3.0.5.

Following is my ncam.server....

# ncam.server generated automatically by NCAM

[reader]

label=speedman1.zaptoo.pw

enable=1

protocol=cccam

device=speedman1.zaptoo.pw,40000

user=*****

password=*****

cccversion=2.1.2

group=1

inactivitytimeout=1

reconnecttimeout=30

lb_weight=100

cccmaxhops=10

ccckeepalive=1

cccwantemu=0

[reader]

label=speedman2.zaptoo.pw

enable=1

protocol=cccam

device=speedman2.zaptoo.pw,50000

user=*****

password=*****

cccversion=2.1.2

group=1

inactivitytimeout=1

reconnecttimeout=30

lb_weight=100

cccmaxhops=10

ccckeepalive=1

[reader]

label=mega-cccam2.zaptoo.pw

enable=1

protocol=cccam

device=mega-cccam2.zaptoo.pw,15002

user=*****

password=*****

cccversion=2.1.2

group=1

inactivitytimeout=1

reconnecttimeout=30

lb_weight=100

cccmaxhops=10

ccckeepalive=1

[reader]

label=mega-cccam3.zaptoo.pw

enable=1

protocol=cccam

device=mega-cccam3.zaptoo.pw,18000

user=*****

password=*****

cccversion=2.1.2

group=1

inactivitytimeout=1

reconnecttimeout=30

lb_weight=100

cccmaxhops=10

ccckeepalive=1

[reader]

label=sky.zaptoo.pw

enable=1

protocol=cccam

device=sky.zaptoo.pw,11000

user=*****

password=*****

cccversion=2.1.2

group=1

inactivitytimeout=1

reconnecttimeout=30

lb_weight=100

cccmaxhops=10

ccckeepalive=1

[reader]

label = myemulator

protocol = constcw

device = /etc/tuxbox/config/SoftCam.Key

caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010

ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000

group = 1

[reader]

label = myconstantcw

enable = 0

protocol = constcw

device = /var/keys/constant.cw

cacheex = 0

cacheex_maxhop = 0

cacheex_allow_request = 0

group = 1

dropbadcws = 0

disablecrccws = 0

[reader]

label = emulator

protocol = emu

device = emulator

caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010

detect = cd

ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000

group = 1

emmcache = 2,1,2,1

emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000

####################### Ncamed ############################

[reader]

label = server1

enable = 0

protocol = newcamd

device = host,port

key = 0102030405060708091011121314

user = user

password = pass

fallback = 1

group = 1

####################### Gbox ############################

[reader]

label = server2

enable = 0

protocol = gbox

mg-encrypted = D: { 192.168.0.4 { 12345 34567 { ABCD1234 { 9 9 }}}}

group = 3

caid = 0300

and follow is my ncam.service

[Canal+ esp]

caid = 0100,1810

provid =

srvid =

7853,7854,7855,7856,7857,7859,785E,785F,7861,7863,7864,749A,749B,749C,749E,749F,74A0,74A1,74A2,74A3,74A4,768E,768F,7690,7692,7693,7695,7696,7697,7699,769A,769B,769C,769D,769E,769F,76A3,76A4,76A5,76A6,76A7,74FF,7500,7504,7509,750B,750C,750F,7789,778A,778B,778C,778D,778E,778F,7790,7793,7795,7796,7797,7531,7532,7533,7534,7535,7536,7537,7820,7823,7824,7826,7828,7829,782D,77BC,77BE,77BF,77C0,77C1,77C2,77C3,77C6,77C7,77C9,77D8,76C0,76C2,76C3,76C4,76C5,76C7,76C8,76C9,76CA,76CC,76CE,76CF,7562,7563,7565,7566,7567,7568,7569,756A,756B,756C,756D,756E,756F,7570,7571,7572,7573,7575,7576,7577,7578,7579,757A,757B,757C,757D,757E,757F,7580,7581,7882,7885,7888,7889,788B,788C,788D,772A,772B,772D,772E,772F,7730,7731,7732,7736,7738,7739,78B4,78B5,78B6,78B7,78B8,78C0,7468,7469,746A,746B,746C,746D,746E,746F,7471,7477,7478,74CD,74D3,74D5,74D6,74D8,74DB,75F9,75FE,75FF,7601,7602,7604,760C,760E,6FF0,6FF3,6FF4,1F4A

[Canalsat]

caid = 0500,0100,1811,1863,1883

provid =

srvid =

7A4D,7AB1,10EA,189D,189E,18A0,18B1,18B2,18B4,275F,2761,1F41,1F42,1F43,1F44,1F45,1F46,1F47,1F48,1F49,1F4A,1F4B,1F4C,2009,200A,200B,200C,200D,200F,2010,2070,2071,2072,2073,2074,2075,2076,2081,2082,2083,22C5,22C6,22C7,22C8,22C9,22CB,22CC,22CE,22CF,22D0,2261,2262,2263,2264,2265,2266,2267,2268,2269,24B9,24BA,24BB,24BC,24BD,24BE,24C0,24C1,24C2,24C3,24C4,26AE,26AF,26B1,26B2,26B3,26B4,26B5,26B8,26C1,26C2,2456,2457,2458,2459,245A,245B,245C,245D,2329,232A,232B,232C,232D,232E,232F,2330,2332,2334,19C9,19CA,19CB,19CC,19CD,19CE,19CF,19D2,19D3,19D4,19DD,427C,427D,427E,427F,4280,4281,4282,4286,4287,428B,428C,429E,2199,219A,21FD,21FE,21FF,2200,2201,2202,2203,2204,2205,2206,2207,2208,1965,1966,1967,1968,1969,196B,196C,196D,196E,196F,1970,2F6C,2F6D,251D,251E,251F,2520,2521,2524,2525,2526,2531,2532,2649,264A,264B,264C,264D,264E,264F,2650,2651,2652,2653,2654,2655,2656,2657,2658,2659,265A,265B,265C,265D,265E,265F,2660,2135,2136,2137,2138,2139,213A

[block fake 500]

caid = 0500

provid = 030B00

and follow is my ncam.user

# ncam.server generated automatically by ncam

[account]

user = dm800se

pwd = dm800se

au = 1

group = 1,2,3,4

But No channels can be opened!!!!!!

What is the problem?????:sleeping::sleeping::sleeping::sleeping:

Thanks a lot sir...

Now the BH feed is working for me....

There is some Lcd4linux config files & teh ipk file (Lcd4linux v5.0-r3)

Can the above ipk file install on UNO4K se???

If yes..... what is the next step????

Do I have to install Lcd4linux config Uno4K se too???

Quote from krystel

bhfeeds_1_all.ipk

Thanks sir

do you have the ipk file for lcd4linux too than can be run on VU+ UNO4kse running Black Hole 3.0.5???

I need an ipk file here to download and install on.

Is it possible for you?

Hi sir....

I'm using this plugin and when try to install any Emu, the message are shown that "Installed Successfully"....

But after rebooting the receiver, Nothing is installed.

What is the problem????

Receiver: VU+UNO4k se

Image: Black Hole 3.0.5

Hi...

I have tried to install enigma2-plugin-extensions-lcd4linux_4.7-r4_all.rar (LCD4Linux BH 3.0.3 only Arm processors) on my receiver (uno4k se) with both black hole 3.0.5 & 3.0.6.

But it can

But it Can't be installed on both of them.

Is there any version of lcd4linux that can be install On Black Hole image on VU+ UNO4K se???

Please Guide me....

Hi sir

I want to install oscam emu and cccam 2.3.2 on mu vu+uno4k se running image black Hole 3.0.6.

Which one of above do I have to download and install????

Hi Sir...

Below is my oscam.conf file....

[global]

logfile = /tmp/oscam.log

#logfile = stdout

nice = -1

preferlocalcards = 1

block_same_ip = 0

block_same_name = 0

[cache]

[streamrelay]

stream_relay_enabled = 0

[dvbapi]

enabled = 1

au = 1

pmt_mode = 0

delayer = 60

ecminfo_type = 1

user = vuplus-team.com

read_sdt = 1

write_sdt_prov = 1

extended_cw_api = 1

boxtype = vuplus

[webif]

httpport = 8888

httptpl = /etc/tuxbox/config/tpl/

httprefresh = 30

httpshowmeminfo = 1

httpshowuserinfo = 1

httpshowcacheexinfo = 1

httpshowecminfo = 1

httpshowloadinfo = 1

httpallowed = 192.168.0.0-255.255.255.255,127.0.0.1

http_status_log = 1

Now. what I have to enter in required item in Oscam_Status_Check_Script????

LOGIN=””

PW=””

IP=””

PORT=”8888”

Quote from esuo2

SCRIPT TO AUTOSTART OSCAM WHEN IT STOPS AND HOW TO RUN CRONJOB ON ENIGMA ²

Oscam and CCcam which are client emu, could sometimes stop working or crash and therefore your Cline or Nline will go off, and you would have to restart the box or from panel.

However, with a script, and cronjob……Oscam/CCcam will be monitored and when it goes off, cron will restart it immediately. This is how to;

The script contains commands that check if CCcam/Oscam is running and if it isn’t it will restart it whereas cronjob tells at what frequency should the script check on Oscam/CCcam. So cronjob can say every 1 minute check if CCcam/Oscam is running if not restart it.

Here is the script;

Bash

#!/bin/bash
if ! ps -C oscam > /dev/null
then /usr/bin/oscam -b
fi

/usr/bin/ is the location of your bin fine, very very important

I have named it oscamcheck.sh and placed in /usr/script/ chmod 755

Now install cron manager, if not already with the image, you can go to pluginsdownload / extensions and cronmanager, download and install the latest version.

Now you would have to check if cron is installed and really running

telnet to your box and type;

Code

 /etc/init.d/busybox-cron start

f61857c6acfb66b2c931fecc.jpg

Now we have confirmed cronmanager is working, so let’s stop it

Code

/etc/init.d/busybox-cron stop

Now we need to create the root file chmod 755

The root file is found in /etc/cron/crontabs/root if the file is already there, then you have to edit, if not create one with a Unix editor like notepad++

Put this line in root

Code

*/1 * * * * /usr/script/oscamcheck.sh

The line will check every minute if Oscam is running if not the script will restart Oscam.

Now you can check if the script is really working

Type

Code

killall -9 oscam

And oscam will stop working and your line will freeze

Now restart the script from telnet and occam will start working again

Code

cd /usr/script/
./oscamcheck.sh

And oscam starts working again…….

Let’s finally put these last commands and let cronmanager start his work

Code

update-rc.d busybox-cron defaults

Code

/etc/init.d/busybox-cron start &

d34155b728873.jpg

Now everything will be working very fine

And your oscam will never ever sleep

Enjoy sweetness

Display More

Hi Friend

I have did what you have said above and nothing is going wrong

But, every time that I turn receiver off and on again, I have to go to script panel (by pressing Green and then Blue Button) and press OK on oscamcheck to start the oscam.

Is it normal or I did something wrong???

Please guide me.

Hi.

I'm new user.

Some questions....

1- I want to know how to config Ncam to use Clines, PowerVu and biss code to open channels that use these codes?

2- Can I install use both oscam and Ncam on my receiver?

3- Do they confuse each other when both of them are installed on receiver?

4- I'm using OscamPowerVu11434 on my receiver. Which Ncam can I download and install on my receiver?

Receiver: VU+ UNO 4K SE

Image: BlackHole

Please help me.

Quote from wika

I think it's oscam.server file that decides what to read.

####################### Emulator ############################

[reader]

label = constant.cw

enable = 0

protocol = constcw

device = /etc/tuxbox/config/constant.cw

caid = 2600,0B00,0B02,0500,0963,06AD,0940

group = 1

Display More

Hi dear friend.

Thanks for your help.

My problem is solved by transferring softcam.key and constant.cw files to usr/keys and etc/tuxbox/config (Both address together)

Hi

I'm a new user.

Lately I have downloaded vuplus-team.com-oscampowervu-arm_BlackHole-11432_all.ipk and install it on my receiver.

I use it to open scrambled channels and it works perfectly.

But, when I use it to open channels that use Biss code (as IRIBTV3, IRIB Varzish on Badr 26E) It wont work and those channels can't be opened.

I did not have the same problem with previous versions of this such as oscam 11392 and vuplus-team.com_OscamPowervu-11401-CCcam-2.3.2-BlackHole_all.

They work perfectly and open the channels that I said above.

How can I solve this problem?

Please Guide me.

Quote from wika

Download this .ipk, and ftp it to folder "tmp" in your vu + box.

Install this file manually. The procedure is slightly different depending on the image you are using.

The installation automatically places the required files in the correct location.

Once the file is installed, you will see it in the image's softcam manager. Enable oscam and you will receive a confirmation that selected oscam is "active".

Hi dear friend

As you said, I have downloaded this ver of oscam and install it on my receiver.

It's working and I can use Clines on it to open desired channels.

Unfortunately this kind of oscam can not read the codes from softcam.key and constant.cw file to open channels that uses Biss codes.

With previous kind of oscam I did not have this problem.

How can I install This kind of oscam....

Oscam 1432 ARM V7 With And Without Emu.rar from Latest OSCam For ARM Based Receivers

From this address Latest OSCam For ARM Based Receivers

I don't know how to install it.

Please guide me.

Quote from Mersad_Maral

Quote from wika

Download this .ipk, and ftp it to folder "tmp" in your vu + box.

Install this file manually. The procedure is slightly different depending on the image you are using.

The installation automatically places the required files in the correct location.

Once the file is installed, you will see it in the image's softcam manager. Enable oscam and you will receive a confirmation that selected oscam is "active".

Hi dear friend

As you said, I have downloaded this ver of oscam and install it on my receiver.

It's working and I can use Clines on it to open desired channels.

Unfortunately this kind of oscam can not read the codes from softcam.key and constant.cw file to open channels that uses Biss codes.

With previous kind of oscam I did not have this problem.

How can I install This kind of oscam....

Oscam 1432 ARM V7 With And Without Emu.rar from Latest OSCam For ARM Based Receivers

From this address Latest OSCam For ARM Based Receivers

I don't know how to install it.

Please guide me.

Display More

Hi again

I have downloaded oscam 11432.ipk and install it on my receiver.

I have the same problem as above to open channels that use Biss code.

I think this kind of oscam (11432 & 11433) can not read the codes from softcam.key and constant.cw file to open channels that uses Biss codes.

What is the problem???

Quote from p.rodrigues

Quote from Mersad_Maral

Hi...

2 Questions....

1) I have downloaded Oscam 1432 ARM V7 With And Without Emu.rar, But I dont know how to install it on my receiver.

2) What is the difference between Oscam with Emu and without Emu?

My receiver is VU+ UNO 4k se running BlackHole 3.0.5

Please Guide me.

# bin = usr/bin attributes755;

# scrip = user/camscript attributes 755;

# config = var/tuxbox- /etctuxbox – attributes 755.

Display More

Display More

Hi

I have downloaded Version bellow

Oscam 1432 ARM V7 With And Without Emu.rar from Latest OSCam For ARM Based Receivers

after unzipping it, there is just 2 files....

1- oscam 11432 ARM V7

2- oscam 11432 EMU ARM V7

I don't know how to install them......

Please guide me.....

Quote from jenseneverest

oscam and keys setup

Hi again

I have did what you have guide above.

But it's not working yet.

I have adde the the codes (above) to my oscam.server files and ftp it to my receiver.

after that I ftp the softvam.key to my receiver and start oscam on my receiver.

oscam1392 and cccam2.3.2 are working on my receiver perfectly (oscam is more better).

The only problem that I have is about to watch channels that use Biss codes.

Quote from jenseneverest

you need oscam EMU

OSCam-EMU Download

My receiver is VU+ UNO4K and it's cpu is arm base.

1- Which one of Oscam emu do H gave to Download???

I have download This from bellow address.

OE2.0, OE2.2, OE2.5

oscam-svn11432-arm_v7-webif-oscam-emu-patched.tar.gz

Address: The LATEST OSCAM-EMU FOR VARIOUS PLATFORMS

2- How do I have to use it to open channel that use Biss code?

HI

i'M A BEGINER.

I have downloaded some softcam.key files and ftp it to my receiver.

unfortunately these softcam.key doesn't have the code for IRIB TV3 HD & IRIB VARZISH on badr 26E.

I have the codes but I don't know how to add them to softcam.key.

Do I have to use MgCam or the other one to Open these channels???

I have installed CCCam 2.3.2, MgCam 1.35a and oscam 11392 on my receiver.

The 3td softcam uploaded bellow (SoftCam Keys By Informed) has codes for Channels RIB TV3 HD & IRIB VARZISH on badr 26E & Intelsat 902 62E,

But after put it in receiver (usr/keys) using ftp, restarting receiver and starting MgCam 1.35a on Channels, Nothing happened.

Please guide me.

The needed information are as bellows....

Sat: Badr 26E

Fre: 11881 H 27500

Prov ID: 001FFF

Index: 1A

Hi...

2 Questions....

1) I have downloaded Oscam 1432 ARM V7 With And Without Emu.rar, But I dont know how to install it on my receiver.

2) What is the difference between Oscam with Emu and without Emu?

My receiver is VU+ UNO 4k se running BlackHole 3.0.5

Please Guide me.

Problem is solved.

Both cccam 2.3.2 and oscam are working.

Cccam has some freeze. Oscam is more better.

Thanks alot for your Guide.

Problem is solved.

Both cccam 2.3.2 and oscam are working.

Cccam has some freeze. Oscam is more better.

Thanks alot for your Guide.