thank you. I will try update my rescue loader.
wget http://dreamboxupdate.com/opendreambox/2.5/stable/images/dm900/zImage-rescue-3.14-r0-dm900-20190911.bin
flash-rescue zImage-rescue-3.14-r0-dm900-20190911.bin
apt-get update && update-rescue -v
this will update my rescue loader?
regards
thank you , but my DM900 accept only this image:
dreambox-image-deb-dm900-20181119.tar.xz
any other image, it only STUCK on RED LIGHT.
I dont know what the problem is. if any body can help me.
another QUESTION: please help me install E2Iplayer (IPTV) Plugn on the above image
Does RESET FACTORY SETTING help solving my Problem?
THESE ARE THE ONLY IMAGES MY DM900 ACCEPY
Dreambox-image-deb-dm900-20181119.tar.xz
Dream-Elite-6.0-dm900-20190225.rootfs.tar.xz
Newnigma2-deb-daily-OE2.5-dm900-25_02_2019.tar.xz
Openpli-6.2-release-dm900-20180602.rootfs.tar.xz
ANY IDEAS
thanks
No, it is original. I bought it From Dream Multimedia Shop in Dubai.
any Way, using ( OptiFlasher_DMipsV3.0.5.0) I was able to bring my DM900 live again, but only using OLD images:
newinigma
openpli
dreamelit
it works on these very old images but not the new ones.
I was usinh openAtv image, it was the best, but now the dream 900 is not accepting any new image.
BTW the (OptiFlasher_DMipsV3.0.5.0) only accept images with the extension XZ
any IDEAS
regards
stuck on red light
Now I am able to put in recovery mode.
this is what I got
Connecting to dreamboxupdate.com (82.149.226.170:80) zImage-rescue-3.14-r 100% |***********************************************************************| 11373k 0:00:00 ETA root@dm900:~# root@dm900:~# flash-rescue zImage-rescue-3.14-r0-dm900-20190911.bin Manufacturer ID: c2 Memory type : 20 Memory density : 19 read id ok comparing 2844 sectors... erasing 2045 sectors... writing 32720 pages... verifying 2045 sectors... flash done root@dm900:~# root@dm900:~# update-rescue -v Fatal: Do not run this command from rescue mode! root@dm900:~# root@dm900:~# flash-rescue zImage-rescue-3.14-r0-dm900-20190911.bin Manufacturer ID: c2 Memory type : 20 Memory density : 19 read id ok comparing 2844 sectors... nothing to do root@dm900:~# root@dm900:~# update-rescue -v Fatal: Do not run this command from rescue mode! root@dm900:~#
root@dm900:~# root@dm900:~# update-rescue -v Fatal: Do not run this command from rescue mode!
NOW the red light is permanent and unable to connect or enter recovery mode
SAME NOTHING CHANGE
then I tried flashing different image no luck
Image: newnigma2-deb-daily-OE2.5-dm900-25_02_2019.tar.xz
dreambox-image-deb-dm900-20190911.tar
openatv-6.3-dm820-20191001.rootfs.tar
I got :
[*] Remounting '/dev/mmcblk0p3' to '/data'
[*] Remounting '/dev/mmcblk0p2' to '/mnt'
/mnt/etc/recovery/backup-hooks.d/fstab.sh: line 4: can't create /mnt/etc/enigma2/fstab.bak: Read-only file system
I tried TELNET with the follwoing Commands:
1. wget http://dreamboxupdate.com/open….14-r0-dm900-20171017.bin
root@dm900:~# root@dm900:~# wget http://dreamboxupdate.com/open….14-r0-dm900-20171017.bin --2020-03-07 16:50:55-- http://dreamboxupdate.com/open….14-r0-dm900-20171017.bin Resolving dreamboxupdate.com... 82.149.226.170 Connecting to dreamboxupdate.com|82.149.226.170|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 11648176 (11M) [application/octet-stream] Saving to: ΓÇÿzImage-rescue-3.14-r0-dm900-20171017.bin.1ΓÇÖ zImage-rescue-3.14-r0-dm900-2 100%[=================================================>] 11.11M 1.50MB/s in 13s 2020-03-07 16:51:08 (885 KB/s) - Γ
ÇÿzImage-rescue-3.14-r0-dm900-20171017.bin.1ΓÇÖ saved [11648176/11648176]
root@dm900:~#
2. flash-rescue zImage-rescue-3.14-r0-dm900-20171017.bin
flash-rescue zImage-rescue-3.14-r0-dm900-20171017.bin
Warning: Could not read CA!
Warning: Please consider updating your rescue loader!
Manufacturer ID: c2
Memory type : 20
Memory density : 19
read id ok
comparing 2844 sectors...
erasing 2842 sectors...
writing 45472 pages...
verifying 2842 sectors...
flash done
root@dm900:~# ÇÿzImage-rescue-3.14-r0-dm900-20171017.bin.1ΓÇÖ saved [11648176/11648176]
plz HELP HELP
Help me PLZ
I have DM900, it was running Open ATV image. after online update, it stopped booting, and stuck on RED Light
I tried ONLINE RECOVERY, this is what I got:
[*] Remounting '/dev/mmcblk0p3' to '/data'
[*] Downloading 'http://dreamboxupdate.com/download/recovery/dm900/release/recovery.sig'
[*] Copying 'recovery' from local storage
[*] Verifying signature of 'recovery'
gpgv: Signature made Wed Dec 21 02:02:08 2016 UTC using RSA key ID 7DA27561
gpgv: Good signature from "Dreambox DM900 Recovery <dm900@recovery.dreambox.de>"
[*] Unmounting '/data'
[*] Running './recovery'
[*] Options '-v -b -r'
[*] Mounting '/dev/mmcblk0p3' to '/data'
[*] Downloading 'http://dreamboxupdate.com/download/recovery/dm900/release/dreambox-image-dm900.tar.xz.sig'
[*] Downloading 'http://dreamboxupdate.com/download/recovery/dm900/release/dreambox-image-dm900.tar.xz'
[*] Verifying signature of 'dreambox-image-dm900.tar.xz'
gpgv: Signature made Thu Nov 14 16:42:02 2019 UTC using RSA key ID 7DA27561
gpgv: Good signature from "Dreambox DM900 Recovery <dm900@recovery.dreambox.de>"
[*] Mounting '/dev/mmcblk0p2' to '/mnt'
/mnt/etc/recovery/backup-hooks.d/fstab.sh: line 4: can't create /mnt/etc/enigma2/fstab.bak: Read-only file system
[*] Unmounting '/mnt'
umount: can't unmount /mnt: Device or resource busy
[*] Unmounting '/data'
Fatal: Failed to execute './recovery'
I bought Dreambox one after I saw its advertisement, that it is IPTV and Android . unfortunately non of these on it.
can any one tell me how to install E2Iplayer (IPTV ) plugin on Dreambox one, and what is the best image?
i was able to install the E2iplayer plugin using DCC, but the follwoing components were missing, :
Wget
rtmpdump
uchardet
Csubtiltle
python -cjson
e2icjson.so
hlsdl
e2ibox
duktape
f4mdump
gstplayer
and as a result, the plugin is not working.
please help seagen
