Posts by sodium1

Can anyone put together Oscam / CCCam 2.3.0 for me to run on E1 based machine ??

Can anyone please upload a working version of 2.3.0 ?
I am after upgrading from 2.1.4... Cheers

ok thanks .. i have now added those files to the server....no longer get the mesage

I am wondering why i get this message everytime i restart Oscam.

2012/09/27 05:57:49        0 s can't open file "/usr/local/etc/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2012/09/27 05:57:49        0 s can't open file "/usr/local/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2012/09/27 05:57:49        0 s can't open file "/usr/local/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
2012/09/27 05:57:49        0 s can't open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory) i***** guessing not loaded
2012/09/27 05:57:49        0 s can't open whitelist file /usr/local/etc/oscam.whitelist
2012/09/27 05:57:49        0 s can't open cacheex-matcher file /usr/local/etc/oscam.cacheex

Can anyone explain what these files actually do ??

Cheers

TNTsat will not clear unless its CCCam 2.3.0, i have tried this myself a while ago and 2.1.3 does not work. You can use oscam to read the card and send it to CCCam by using a N line

Thanks for that info .. its most certainly a clone ..lol. Do i need to remove the SIM ? and how do i remove it ?

Ok i have opened the box and its most certainly a clone, not a original as he was told. The motherboard says its a DM800 REV:J. I can see the sim card inside, can i remove this easily ??

I have been asked to flash a DM800 for a friend at work. I have never had a DM800, and it seems like there are many different versions out there. My mate is led to believe its a original DM800, but i am not too sure. Can anyone tell me how i can identify this box, and also point me in the right direction for a good image ?? Cheers

Can anyone tell me if its possible to add a additional cardreader to a VU+ solo ? I have Smargo and Omnikey here, and could do with adding new card when it arrives to work alongside my other one.... Cheers

The space is not put there by myself.... that is how is copies over. I noticed it myself but was unable to fix it... But in original file the space is not there ( trust me ) .... work still in progress :feel_good:

As this thread seems to of stumped a few people, here is where i am right now. When reading this card with oscam, you CANNOT use newcamd to share this card onwards to a CCCam server as its not recognised. However you can connect to this oscam server with a STB thats running CCCam 2.3.0, and it will clear ok ... although there are still many channels on this card that still DO NOT clear ! So its still work in progress...

As a follow up to my last thread about TNT France, it seems as though there is no channels clearing at all off this card. The card is updated until April 26th 2016 ( yes thats right .. its a 4 year package ) but no channels to watch. Anymore ideas anyone ?

[global]
usrfile = /emu/log/oscamuser.log
logfile = /var/log/oscam.log
nice = -1
WaitForCards = 1
ClientTimeout = 5
CacheDelay = 120
maxlogsize = 200
saveinithistory = 1
PreferLocalCards = 1

[monitor]
port = 988
aulow = 120
hideclient_to = 15
monlevel = 0
appendchaninfo = 0

[newcamd]
port = 44444@093E:000000;13005@0BAA:000000;34001@0500:030B00
key = 0102030405060708091011121314
keepalive = 1

[webif]
httpport = ####
httpuser = ######
httppwd = #####
httpallowed = 127.0.0.1,192.168.0.2-192.168.0.100,192.168.1.2-192.168.1.100

[reader]
label = viasat
protocol = pcsc
device = 0
caid = 093E
boxid = ########
ecmwhitelist = 093E:88,84
detect = cd
mhz = 357
cardmhz = 357
ident = 093E:000000
group = 1
emmcache = 1,3,2
blockemm-g = 1
lb_weight = 200

[reader]
label = tring
protocol = pcsc
device = 1
pincode = 1234
caid = 0BAA
ecmwhitelist = 0BAA:67,6C
detect = cd
mhz = 357
cardmhz = 357
ident = 0BAA:000000
group = 2
emmcache = 1,3,2
blockemm-unknown = 1
lb_weight = 200

[reader]
label = tntsat
protocol = pcsc
device = 2
caid = 0500
ecmwhitelist = 0500@030B00:EC,57,D8,10D,12A,142
detect = cd
mhz = 357
cardmhz = 357
ident = 0500:030B00
chid = 1F1F:000057,0000C4,0000D8,0000EC,00010D,00012A,000 142,000148
group = 3
AESKeys = 0500@030B00:43..43,A7..26, EF..E3

[account]
user = spa###
pwd = osc###
group = 1
au = viasat
cccreshare = 10
keepalive = 1

[account]
user = loca###
pwd = loc###
group = 1,2
au = tring
cccreshare = 10
keepalive = 1

[account]
user = TN#####
pwd = TN#####
group = 3
au = tntsat
cccreshare = 10
keepalive = 1

Oscam dvbapi

I: 0500:030B00:2009 # TNTSat – Canal+
I: 0500:030B00:200A # TNTSat – Canal+ Decale
I: 0500:030B00:200B # TNTSat – Canal+ Cinema
I: 0500:030B00:200C # TNTSat – Canal+
I: 0500:030B00:200D # TNTSat – Canal+ Family
I: 0500:030B00:2010 # TNTSat – Canal+ Sport
I: 0500:030B00:2261 # TNTSat – Canal+ HD
I: 0500:030B00:2262 # TNTSat – Canal+ DECALE HD
I: 0500:030B00:2263 # TNTSat – Canal+ CINEMA HD
I: 0500:030B00:2264 # TNTSat – Canal+ SPORT HD
I: 0500:030B00:2265 # TNTSat – Canal+ FAMILY HD
I: 0500:030B00:2275 # TNTSat – Canal+ HD
I: 0500:030B00:2276 # TNTSat – Canal+ DECALE HD
I: 0500:030B00:2277 # TNTSat – Canal+ CINEMA HD
I: 0500:030B00:2278 # TNTSat – Canal+ SPORT HD
I: 0500:030B00:2279 # TNTSat – Canal+ FAMILY HD
I: 0500:030B00:227F # TNTSat – Canal+ HD
I: 0500:030B00:4284:1788 # TNTSat – NT1
I: 0500:030B00:4290:1788 # TNTSat – NT1
P: 0500:030B00 # TNTSAT

Oscam Services

[tntsat_sd]
caid = 0500
provid = 030B00
srvid = 20B3,20AE,20A5,20B6,1F48,25E5,25E6,25E7,2649,25E9,264D,2650,2651,25ED,25EE,25EF,2653,25E8,264A,264B
264C,25EA,264E,264F,25EB,25EC,1F57,2652,25F0,23F3,2407,1F41,1F58,20AF,20B4,20A4,20B5,1FEB,1FD8,4284,42 90
1F44,1F56,1F4A,1F55,23F1,2405,23F6,240A,23F7,240B

[tntsat_hd]
caid = 0500
provid = 030B00
srvid = 2329,232a,245e,246c

Its ok now mate .... a friend who was also working on this problem had disabled several clients whilst he tested himself ... And it was what you said that fixed the issue ... so oscam configs has a typo error on there... many thanks for your help

Is there anyway i can PM you the logfile ? Otherwise it will take me ages to remove sensitive data. Cheers

Thanks for the help, the space was actually a typo i made, but replacing the @ for a : has not made any difference, and it still appears to be showing offline. I took the config from oscam configs so i assume it was correct. Any more ideas please.

I have a problem with a Debian 64 bit oscam server.
The server has been running very well with 2 local cards ( Viasat & Tring ) for a While.
The next local card to add is a TNT viaccess, but it does not seem to be going to plan.
All three cards are read with Omnikey 3121 card readers.
It seems as though the connection for the TNT local card is being terminated, and i don't know why ... Can anyone offer some advice ? I have removed extra users from the txt file on here to simplify things, but they are still active in original files....Here is the configs and part of the log when rebooted ... cheers

p.s please remember that Viasat and Tring are working fine, and its only TNT whats got the issue

[global]
usrfile = /emu/log/oscamuser.log
logfile = /var/log/oscam.log
nice = -1
WaitForCards = 1
ClientTimeout = 5
CacheDelay = 120
maxlogsize = 200
saveinithistory = 1
PreferLocalCards = 1

[monitor]
port = 988
aulow = 120
hideclient_to = 15
monlevel = 0
appendchaninfo = 0

[newcamd]
port = 44444@093E:000000;13005@0BAA:000000;34001@0500@030B00
key = 0102030405060708091011121314
keepalive = 1

[webif]
httpport = 8###
httpuser = admin
httppwd = ########
httpallowed = 127.0.0.1,192.168.0.2-192.168.0.100,192.168.1.2-192.168.1.100

################################################################################################

[reader]
label = viasat
protocol = pcsc
device = 0
caid = 093E
boxid = ########
ecmwhitelist = 093E:88,84
detect = cd
mhz = 357
cardmhz = 357
ident = 093E:000000
group = 1
emmcache = 1,3,2
blockemm-g = 1
lb_weight = 200

[reader]
label = tring
protocol = pcsc
device = 1
pincode = 1234
caid = 0BAA
ecmwhitelist = 0BAA:67,6C
detect = cd
mhz = 357
cardmhz = 357
ident = 0BAA:000000
group = 2
emmcache = 1,3,2
blockemm-unknown = 1
lb_weight = 200

[reader]
label = tntsat
protocol = pcsc
device = 2
caid = 0500
ecmwhitelist = 500
detect = cd
mhz = 357
cardmhz = 357
ident = 0500:030B00
chid = 1F1F:000057,0000C4,0000D8,0000EC,00010D,00012A,000142,000148
group = 3

#####################################################################################################

[account]
user = spare1
pwd = oscam1
group = 1
au = viasat
cccreshare = 10
keepalive = 1

[account]
user = local44
pwd = local55
group = 1,2
au = tring
cccreshare = 10
keepalive = 1

[account]
user = TNTuser1
pwd = TNTpass1
group = 3
au = tntsat
cccreshare = 10
keepalive = 1

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Tue Jul 17 16:38:08 2012
-------------------------------------------------------------------------------
2012/07/17 16:38:08 0 s starting thread log_list_thread
2012/07/17 16:38:08 0 s log_list_thread thread started
2012/07/17 16:38:08 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #6364 (x86_64-pc-linux)
2012/07/17 16:38:08 0 s version=1.20-unstable_svn, build #6364, system=x86_64-pc-linux, nice=-1
2012/07/17 16:38:08 0 s client max. idle=120 sec, debug level=0
2012/07/17 16:38:08 0 s max. logsize=200 Kb, loghistorysize=4096 bytes
2012/07/17 16:38:08 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2012/07/17 16:38:08 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2012/07/17 16:38:08 0 s userdb reloaded: 16 accounts loaded, 0 expired, 3 disabled
2012/07/17 16:38:08 0 s signal handling initialized (type=sysv)
2012/07/17 16:38:08 0 s can't open file "/usr/local/etc/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2012/07/17 16:38:08 0 s can't open file "/usr/local/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2012/07/17 16:38:08 0 s can't open file "/usr/local/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
2012/07/17 16:38:08 0 s can't open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory) i***** guessing not loaded
2012/07/17 16:38:08 0 s can't open whitelist file /usr/local/etc/oscam.whitelist
2012/07/17 16:38:08 0 s can't open cacheex-matcher file /usr/local/etc/oscam.cacheex
2012/07/17 16:38:08 0 s Starting listener 0
2012/07/17 16:38:08 0 s monitor: initialized (fd=6, port=988)
2012/07/17 16:38:08 0 s Starting listener 0
2012/07/17 16:38:08 0 s camd35: disabled
2012/07/17 16:38:08 0 s Starting listener 0
2012/07/17 16:38:08 0 s cs378x: disabled
2012/07/17 16:38:08 0 s Starting listener 0
2012/07/17 16:38:08 0 s newcamd: initialized (fd=7, port=44444, crypted)
2012/07/17 16:38:08 0 s -> CAID: 093E PROVID: 000000
2012/07/17 16:38:08 0 s Starting listener 1
2012/07/17 16:38:08 0 s newcamd: initialized (fd=8, port=13005, crypted)
2012/07/17 16:38:08 0 s -> CAID: 0BAA PROVID: 000000
2012/07/17 16:38:08 0 s Starting listener 2
2012/07/17 16:38:08 0 s newcamd: initialized (fd=9, port=34001, crypted)
2012/07/17 16:38:08 0 s Starting listener 0
2012/07/17 16:38:08 0 s pandora: disabled
2012/07/17 16:38:08 0 s Starting listener 0
2012/07/17 16:38:08 0 s csp: disabled
2012/07/17 16:38:08 0 s Starting listener 0
2012/07/17 16:38:08 0 s radegast: disabled
2012/07/17 16:38:08 0 s starting thread http
2012/07/17 16:38:08 0 s http thread started
2012/07/17 16:38:08 0 s starting thread reader check
2012/07/17 16:38:08 0 s reader check thread started
2012/07/17 16:38:08 0 s starting thread check
2012/07/17 16:38:08 0 s check thread started
2012/07/17 16:38:08 0 s creating thread for device 0
2012/07/17 16:38:08 0 s creating thread for device 1
2012/07/17 16:38:08 0 s creating thread for device 2
2012/07/17 16:38:08 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/07/17 16:38:08 0 s waiting for local card init
2012/07/17 16:38:08 26607E0 h HTTP Server listening on port 8087
2012/07/17 16:38:08 265D440 r reader tntsat initialized (device=2, detect=cd, mhz=357, cardmhz=357)
2012/07/17 16:38:08 265BA70 r reader tring initialized (device=1, detect=cd, mhz=357, cardmhz=357)
2012/07/17 16:38:08 263F9D0 r reader viasat initialized (device=0, detect=cd, mhz=357, cardmhz=357)
2012/07/17 16:38:09 263F9D0 r viasat card detected
2012/07/17 16:38:09 265D440 r tntsat card detected
2012/07/17 16:38:09 265BA70 r tring card detected
2012/07/17 16:38:09 265D440 r tntsat ATR: 3F 77 18 ## ## ## ## 41 02 6C 90 00
2012/07/17 16:38:09 263F9D0 r viasat ATR: 3F 7D 11 25 02 41 B0 ## ## ## ## 50 F0 80 00 56 54 03
2012/07/17 16:38:09 265BA70 r tring ATR: 3B ## ## ## 42 30 30
2012/07/17 16:38:10 265BA70 r type: Conax, caid: 0BAA, serial: ##########, hex serial: ########, card: v64
2012/07/17 16:38:10 265BA70 r Providers: 1
2012/07/17 16:38:10 265BA70 r Provider: 1 Provider-Id: 000000
2012/07/17 16:38:10 265BA70 r Provider: 1 SharedAddress: ########
2012/07/17 16:38:10 265BA70 r found cardsystem conax
2012/07/17 16:38:10 265BA70 r Package: 1, id: 1111, classes: 01000050, date: 2012/07/01 - 2012/07/31, name: AlbaniaSat
2012/07/17 16:38:10 265BA70 r Package: 2, id: 1111, classes: 01000050, date: 2012/06/01 - 2012/06/30, name: AlbaniaSat
2012/07/17 16:38:10 265BA70 r PPV-Event: 1, id: 1001, date: 2011/09/05 - 2012/09/05, name: Family 12 months
2012/07/17 16:38:10 265BA70 r PPV-Event: 2, id: 1001, date: 2010/08/20 - 2011/08/20, name: Family 12 months
2012/07/17 16:38:10 265BA70 r [conax-reader] ready for requests
2012/07/17 16:38:10 265D440 r [viaccess-reader] using ecm #701 for long viaccess ecm
2012/07/17 16:38:10 265D440 r type: Viaccess (non-standard atr), caid: 0500, serial: 3########
2012/07/17 16:38:11 265D440 r providers: 2 (FFF400,030B00)
2012/07/17 16:38:11 265D440 r [viaccess-reader] ready for requests
2012/07/17 16:38:11 265D440 r found cardsystem viaccess
2012/07/17 16:38:11 265D440 r [viaccess-reader] card detected
2012/07/17 16:38:11 265D440 r [viaccess-reader] serial: 3########
2012/07/17 16:38:11 265D440 r provider: 1, id: FFF400, name: ISSUER, sa: ########, geo: empty
2012/07/17 16:38:11 263F9D0 r [videoguard2-reader] parental lock setting: FF FF FF FF
2012/07/17 16:38:11 263F9D0 r [videoguard2-reader] type: VideoGuard Viasat (093E), caid: 093E
2012/07/17 16:38:11 263F9D0 r [videoguard2-reader] serial: ########, BoxID: ########, baseyear: 2000
2012/07/17 16:38:11 263F9D0 r [videoguard2-reader] ready for requests
2012/07/17 16:38:11 263F9D0 r found cardsystem videoguard2
2012/07/17 16:38:11 263F9D0 r [videoguard2-reader] viasat card detected
2012/07/17 16:38:11 263F9D0 r [videoguard2-reader] type: VideoGuard Viasat (093E)
2012/07/17 16:38:11 263F9D0 r [videoguard2-reader] tier: 002e, expiry date: 2012/09/02-00:00:00
2012/07/17 16:38:11 263F9D0 r [videoguard2-reader] tier: 003e, expiry date: 2012/09/02-00:00:00
2012/07/17 16:38:11 263F9D0 r [videoguard2-reader] tier: 0041, expiry date: 2012/09/02-00:00:00
2012/07/17 16:38:11 265D440 r provider: 2, id: 030B00, name: TNTSAT, sa: ########, geo: 03 FF FF 00
2012/07/17 16:38:11 263F9D0 r [videoguard2-reader] tier: 0044, expiry date: 2012/09/02-00:00:00
2012/07/17 16:38:11 263F9D0 r [videoguard2-reader] tier: 007e, expiry date: 2012/09/02-00:00:00
2012/07/17 16:38:11 265D440 r class: 00, expiry date: 2012/04/27 - 2016/04/26
2012/07/17 16:38:11 263F9D0 r [videoguard2-reader] tier: 0085, expiry date: 2012/09/02-00:00:00
2012/07/17 16:38:11 263F9D0 r [videoguard2-reader] tier: 009f, expiry date: 2012/09/02-00:00:00
2012/07/17 16:38:11 263F9D0 r [videoguard2-reader] tier: 00ab, expiry date: 2012/09/02-00:00:00
2012/07/17 16:38:11 263F9D0 r [videoguard2-reader] tier: 00b2, expiry date: 2012/09/02-00:00:00
2012/07/17 16:38:11 263F9D0 r [videoguard2-reader] tier: 00cc, expiry date: 2012/09/02-00:00:00
2012/07/17 16:38:11 263F9D0 r [videoguard2-reader] tier: 00e0, expiry date: 2012/09/02-00:00:00
2012/07/17 16:38:12 0 s init for all local cards done
2012/07/17 16:38:12 0 s anti cascading disabled
2012/07/17 16:38:12 266B710 c client connected to 44444 port
2012/07/17 16:38:12 2669D40 c client connected to 34001 port
2012/07/17 16:38:12 2668370 c client connected to 13005 port
2012/07/17 16:38:12 26669A0 c client connected to 44444 port
2012/07/17 16:38:12 26669A0 c encrypted newcamd:44444-client 127.0.0.1 granted (user, au=on (1 reader))
2012/07/17 16:38:12 26669A0 c user user authenticated successfully (CCcam)
2012/07/17 16:38:12 26669A0 c AU enabled for user user on reader viasat
2012/07/17 16:38:12 266D0E0 c client connected to 13005 port
2012/07/17 16:38:12 266D0E0 c encrypted newcamd:13005-client 127.0.0.1 granted (user1, au=on (1 reader))
2012/07/17 16:38:12 266D0E0 c user user1 authenticated successfully (CCcam)
2012/07/17 16:38:12 266D0E0 c AU enabled for user user1 on reader tring
2012/07/17 16:38:12 266B710 c encrypted newcamd:44444-client 192.168.0.51 granted (spare1, au=on (1 reader))
2012/07/17 16:38:12 266B710 c user spare1 authenticated successfully (CCcam)
2012/07/17 16:38:12 266B710 c AU enabled for user spare1 on reader viasat
2012/07/17 16:38:12 266EE50 c client connected to 34001 port
2012/07/17 16:38:12 266EE50 c encrypted newcamd:34001-client 127.0.0.1 granted (TNTuser1, au=on (1 reader))
2012/07/17 16:38:12 266EE50 c user TNTuser1 authenticated successfully (CCcam)
2012/07/17 16:38:12 266EE50 c AU disabled for user TNTuser1
2012/07/17 16:38:12 266EE50 c no valid CAID found in CAID for user 'TNTuser1'
2012/07/17 16:38:12 2668370 c encrypted newcamd:13005-client ########## granted (local34, au=on (1 reader))
2012/07/17 16:38:12 2668370 c user local34 authenticated successfully (CCcam)
2012/07/17 16:38:12 2668370 c AU enabled for user local34 on reader tring
2012/07/17 16:38:12 2669D40 c encrypted newcamd:34001-client ########### granted (#####, au=on (1 reader))
2012/07/17 16:38:12 2669D40 c user ##### authenticated successfully (CCcam)
2012/07/17 16:38:12 2669D40 c AU disabled for user #####
2012/07/17 16:38:12 26712F0 c client connected to 34001 port
2012/07/17 16:38:12 26712F0 c encrypted newcamd-client ########### rejected (newcamd:34001 disabled account)
2012/07/17 16:38:12 26712F0 c account is invalid for user TNTuser2 (CCcam)
2012/07/17 16:38:12 26712F0 c encrypted newcamd-client ########### rejected (login failure)
2012/07/17 16:38:12 26712F0 c anonymous disconnected from ###########
2012/07/17 16:38:12 26712F0 c thread 7F5DF176F700 ended!
2012/07/17 16:38:13 2673210 c client connected to 44444 port
2012/07/17 16:38:13 2673210 c encrypted newcamd:44444-client ########### granted (internal, au=on (1 reader))
2012/07/17 16:38:13 2673210 c user internal authenticated successfully (CCcam)
2012/07/17 16:38:13 2673210 c AU enabled for user internal on reader viasat
2012/07/17 16:38:13 266EE50 c WARNING: invalid client tcp_conn_close()
2012/07/17 16:38:13 266EE50 c TNTuser1 disconnected from 127.0.0.1
2012/07/17 16:38:13 266EE50 c thread 7F5DF1F70700 ended!

Its finally working ok now after manually removing the 3 remaining files in the oscam config folder that was still there after i removed oscam/Cccam 2.1.1. After i did i full reinstallation it seems ok now, there must of been something in one of those 3 files that was making it not perform correctly.... Thanks for the advice, i thought i was going mad ! You would never believe i have flashed loads of boxes and built a few Debian servers would you ? lol

No mate, i am not using those configs ... i will try them when i get home and compare them to my existing ones .... I wll get back to you and tell you how i got on ... Cheers

No mate, i am not making myself very clear ... sorry. I am not after clearing conto/porn @ 13e, as my card is satellitebg @ 23.5e. What i am saying is that oscam gui shows is as being conto/porn @ 13e, and not the actuaul card. So basically i think oscam is not reading my local card ( satellite bg @ 23.5e ) properly, maybe something to do with some oscam config files being out of date ???

After finding time to run some final tests last night i have stumbled across another problem. Oscam is starting ok, CCcam starts and runs ok, but the card is not actually clearing any channels.
Oscam is saying that their is no matching reader in the logfile, and oscam is recognising the card as 13e Conto/porn. I assume i need to update a couple of files within the config files in oscam ?? Is this because the version of oscam used is a older version ?? Can anyone confirm which files i need to update and where can i download the latest ? Cheers