Posts by samur

**samur** · Nov 28th 2021

version with (libcrypto,libusb,pcsc,emu) ;

###

From now versions will with cak7 support .

Code

1856, 183E/4K, 1819, 1811, 1813, 1884, 186A, ......etc

cak7_mode is replaced by detect_seca_nagra_tunneled_card.

Code

detect_seca_nagra_tunneled_card =
0 - Merlin, Cayman Cards [ 1856, 1884(NC+), 186A(HD04),...]
1 - Enabled (default) Seca/Nagra Cards
2 - Cameleon, cak6.x Cards [ 1811, 1813, 1830(Maxtv), 1843(HD02), 1860(HD03),...]

Example 1813: detect_seca_nagra_tunneled_card = 2

##

cwekey = CWPK[0],CWPK[1],CWPK[2],...,CWPK[7] ===> the syntax of "cwekey"

Notes:

just replace in your config (oscam.server):

Code

cwekey0 = xxxxxx ...

WITH:

Code

cwekey = xxxxxx ...

then for exemple it will be like this:

i set CWPK [0] Like this:

cwekey = A2CA656F9F8CE6BBFCF4F31DE4DEA9E6,0,0,0,0,0,0,0

Or simply:

cwekey = A2CA656F9F8CE6BBFCF4F31DE4DEA9E6

###

Add: TivuSat Green And Black smartcard Entitlements show .

###

Add: CONAX CWPK (not tested again) .

Notes:

just replace in your config (oscam.server):

Code

[reader]
CWPK                        = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
...

WITH:

Code

[reader]
deskey                        = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
...

List of STB's:

Dreambox ONE

Dreambox TWO

Rpi 3

Rpi 4

;

**samur** · Nov 28th 2021

oscam-svn11704-android24-stapi with emu ;

ConfigDir: /data/plugin/oscamemu

;

**samur** · Nov 28th 2021

oscam-svn11704- with emu ;

;

**samur** · Nov 28th 2021

OSCam for "gx boxes-Arch:c-sky"

List of STB's:

Octagon SX88

Octagon SX88+

Octagon SX88+ Optima

Octagon SX88+ Combo

Octagon SX888 IP

Octagon ASAT HDR No.1

###

Denys H.265

Denys H.265_EU

Denys H.265_PRO

Denys H.265_PRO_Combo

Denys H. 265_PRO_Combo_EU

##

Golden Interstar ALPHA X

;

**samur** · Nov 28th 2021

oscam-svn11704- with emu ;

;

**samur** · Nov 27th 2021

i think you are a show man ...;

{

go to : Viaccess, Irdeto, Nagravision ,....................then tell them about this:

Quote

This program is free software: you can redistribute it and/or modify

it under the terms of the GNU General Public License as published by

the Free Software Foundation, either version 3 of the License, or

(at your option) any later version.

return 0 ;

}

Note: Stop spamming this thread please....!!!

;

**samur** · Nov 27th 2021

Quote from saub

@samur

Is the source code of this patch is available for public?

No ,

but why ?

;

**samur** · Nov 24th 2021

1856 card not workig....; ?

;

**samur** · Nov 13th 2021

same probleme on : Discovery Hungary (0.8°W ) sound ok but video no for almost 3 days ;

is it a new encryption ...?

tested with OSCam .

;

**samur** · Nov 13th 2021

anyone with : 1811:003311 && 1819:00006D ?

thanks

;

**samur** · Nov 10th 2021

Quote from azaz1

1813 is working in global mode
Card is starting in GLOBAL mode
it is written in log
1884 and 1861 working in unique mode but it is not in log ?
p.s.
thanx for bin @samur
example conf for the case CWPK0 - CWPK welcom :)

19:22:15 00000000 s (main) System name = Linux
19:22:15 00000000 s (main) Host name = debian-server
19:22:15 00000000 s (main) Release = 5.10.0-8-amd64
19:22:15 00000000 s (main) Version = #1 SMP Debian 5.10.46-4 (2021-08-03)
19:22:15 00000000 s (main) Machine = x86_64
19:22:15 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 3688433
Warning: keyword 'sendnuid' in reader section not recognized
19:22:15 00000000 s (config) userdb reloaded: 10 accounts loaded, 0 expired, 0 disabled
19:22:15 00000000 s (main) signal handling initialized
19:22:15 00000000 s (config) 3260 service-id's loaded in 8 ms
19:22:15 00000000 s (config) WARNING: You risk high CPU load and high ECM times with more than 2000 service-id's!
19:22:15 00000000 s (config) HINT: --> use optimized lists from https://wiki.streamboard.tv/wiki/Srvid
19:22:15 00000000 s (net) cccam: initialized (fd=4, port=xxx)
19:22:15 00000000 s (reader) CYFRA-1813 [mouse] creating thread for device /dev/ttyUSB0
19:22:15 00000000 s (main) waiting for local card init
19:22:15 421A59E4 h (webif) webif: decompressed 180045 bytes back into 474608 bytes
19:22:15 421A59E4 h (webif) HTTP Server running. ip=:: port=xxx
19:22:15 6E828677 r (reader) CYFRA-1813 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=368)
19:22:16 6E828677 r (reader) CYFRA-1813 [mouse] card detected
19:22:18 6E828677 r (reader) CYFRA-1813 [mouse] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6
19:22:18 6E828677 r (reader) CYFRA-1813 [mouse] Setting baudrate to 9600 bps
19:22:18 6E828677 r (reader) CYFRA-1813 [mouse] detected card in CAK6/Seca mode -> try switch to Nagra CAK7
19:22:18 6E828677 r (reader) CYFRA-1813 [mouse] switch nagra layer OK
19:22:19 6E828677 r (reader) CYFRA-1813 [mouse] ATR: 3B FF 95 00 FF 50 80 1C 44 4E 41 53 50
19:22:19 6E828677 r (reader) CYFRA-1813 [mouse] Setting baudrate to 111600 bps
19:22:20 6E828677 r (reader) CYFRA-1813 [mouse] Rom revision: DNASP400 RevI4G
19:22:21 6E828677 r (reader) CYFRA-1813 [mouse] Card has DT05_00
19:22:21 6E828677 r (reader) CYFRA-1813 [mouse] DT05_00 is correct
19:22:21 6E828677 r (reader) CYFRA-1813 [mouse] Card has DT05_10
19:22:21 6E828677 r (reader) CYFRA-1813 [mouse] card needs restart after 35999 CMDs
19:22:21 6E828677 r (reader) CYFRA-1813 [mouse] DT05_10 is correct
19:22:21 6E828677 r (reader) CYFRA-1813 [mouse] Card is starting in GLOBAL mode
19:22:22 6E828677 r (reader) CYFRA-1813 [mouse] ready for requests
19:22:22 6E828677 r (reader) CYFRA-1813 [mouse] found card system nagra merlin
19:22:22 6E828677 r (reader) CYFRA-1813 [nagra merlin] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
19:22:22 6E828677 r (reader) CYFRA-1813 [nagra merlin] ROM: D N A S P 4 0 0
19:22:22 6E828677 r (reader) CYFRA-1813 [nagra merlin] REV: R e v I 4 G
19:22:22 6E828677 r (reader) CYFRA-1813 [nagra merlin] SER: ############
19:22:22 6E828677 r (reader) CYFRA-1813 [nagra merlin] CAID: 1813
19:22:22 6E828677 r (reader) CYFRA-1813 [nagra merlin] Prv.ID: 00 00 01 A0 (sysid)
19:22:22 6E828677 r (reader) CYFRA-1813 [nagra merlin] -----------------------------------------
19:22:22 6E828677 r (reader) CYFRA-1813 [nagra merlin] |id |tier |valid from |valid to |
19:22:22 6E828677 r (reader) CYFRA-1813 [nagra merlin] +----+--------+------------+------------+
*** buffer overflow detected ***: terminated

Display More

azaz1 another one: https://www.linuxsat-support.c…4-x86-64-without-emu-zip/

;

**samur** · Nov 10th 2021

Quote from azaz1
Quote from samur
;
Versions with cak7 support and with Emu .
For those having smartcards they can do Tests and report results here with Logs....;
Code
1856, 1819, 1813, 1884, 186A, ......etc
Note: Please don't send me any " PM " because i don't have any keys ....

and thanks for testing

;
Display More
samur
misunderstanding :)

Display Spoiler

2021/11/10 16:55:54 00000000 s (main) System name = Linux
2021/11/10 16:55:54 00000000 s (main) Host name = debian-server
2021/11/10 16:55:54 00000000 s (main) Release = 5.10.0-8-amd64
2021/11/10 16:55:54 00000000 s (main) Version = #1 SMP Debian 5.10.46-4 (2021-08-03)
2021/11/10 16:55:54 00000000 s (main) Machine = x86_64
2021/11/10 16:55:54 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 3634160
2021/11/10 16:55:54 00000000 s (emu) OSCam-Emu version 798
2021/11/10 16:55:54 00000000 s (config) userdb reloaded: 10 accounts loaded, 0 expired, 0 disabled
2021/11/10 16:55:54 00000000 s (main) signal handling initialized
2021/11/10 16:55:54 00000000 s (config) 3260 service-id's loaded in 10 ms
2021/11/10 16:55:54 00000000 s (config) WARNING: You risk high CPU load and high ECM times with more than 2000 service-id's!
2021/11/10 16:55:54 00000000 s (config) HINT: --> use optimized lists from https://wiki.streamboard.tv/wiki/Srvid
2021/11/10 16:55:54 00000000 s (net) cccam: initialized (fd=4, port=xxx)
2021/11/10 16:55:54 00000000 s (reader) CYFRA-1813 [mouse] creating thread for device /dev/ttyUSB0
2021/11/10 16:55:54 00000000 s (reader) emulator [emu] creating thread for device emulator
2021/11/10 16:55:54 00000000 s (main) waiting for local card init
2021/11/10 16:55:54 16667602 r (emu) Stream key delayer initialized
2021/11/10 16:55:54 16667602 r (emu) Stream relay server initialized
2021/11/10 16:55:54 16667602 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2021/11/10 16:55:54 00000000 (emu) INFO: FFDecsa parallel mode = 128
2021/11/10 16:55:54 16667602 r (reader) emulator [emu] card detected
2021/11/10 16:55:54 65093F22 h (webif) webif: decompressed 179267 bytes back into 477272 bytes
2021/11/10 16:55:54 65093F22 h (webif) HTTP Server running. ip=:: port=xxx
2021/11/10 16:55:55 20799FA0 r (reader) CYFRA-1813 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=368)
2021/11/10 16:55:55 16667602 r (reader) emulator [emu] found card system emu
2021/11/10 16:55:55 16667602 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
2021/11/10 16:55:55 20799FA0 r (reader) CYFRA-1813 [mouse] card detected
2021/11/10 16:55:55 16667602 r (emu) Key file not found in: /CYFRA
2021/11/10 16:55:55 16667602 r (emu) Cannot open key file path: /var/keys
2021/11/10 16:55:55 16667602 r (emu) Total keys in memory: W:0 V:0 N:0 I:0 F:0 G:0 P:0 T:0 A:0
2021/11/10 16:55:57 20799FA0 r (reader) CYFRA-1813 [mouse] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6
2021/11/10 16:55:57 20799FA0 r (reader) CYFRA-1813 [mouse] Setting baudrate to 9600 bps
2021/11/10 16:55:57 20799FA0 r (reader) CYFRA-1813 [mouse] detected card in CAK6/Seca mode -> try switch to Nagra CAK7
2021/11/10 16:55:57 20799FA0 r (reader) CYFRA-1813 [mouse] switch nagra layer OK
2021/11/10 16:55:58 20799FA0 r (reader) CYFRA-1813 [mouse] ATR: 3B FF 95 00 FF 50 80 1C 44 4E 41 53 50
2021/11/10 16:55:58 20799FA0 r (reader) CYFRA-1813 [mouse] Setting baudrate to 111600 bps
2021/11/10 16:55:59 20799FA0 r (reader) CYFRA-1813 [mouse] Rom revision: DNASP400 RevI4G
2021/11/10 16:56:00 20799FA0 r (reader) CYFRA-1813 [mouse] Card has DT05_00
2021/11/10 16:56:00 20799FA0 r (reader) CYFRA-1813 [mouse] DT05_00 is correct
2021/11/10 16:56:00 20799FA0 r (reader) CYFRA-1813 [mouse] Card has DT05_10
2021/11/10 16:56:00 20799FA0 r (reader) CYFRA-1813 [mouse] card needs restart after 35999 CMDs
2021/11/10 16:56:00 20799FA0 r (reader) CYFRA-1813 [mouse] DT05_10 is correct
2021/11/10 16:56:00 20799FA0 r (reader) CYFRA-1813 [mouse] Card is starting in GLOBAL mode
2021/11/10 16:56:01 20799FA0 r (reader) CYFRA-1813 [mouse] ready for requests
2021/11/10 16:56:01 20799FA0 r (reader) CYFRA-1813 [mouse] found card system nagra merlin
2021/11/10 16:56:01 20799FA0 r (reader) CYFRA-1813 [nagra merlin] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
2021/11/10 16:56:01 20799FA0 r (reader) CYFRA-1813 [nagra merlin] ROM: D N A S P 4 0 0
2021/11/10 16:56:01 20799FA0 r (reader) CYFRA-1813 [nagra merlin] REV: R e v I 4 G
2021/11/10 16:56:01 20799FA0 r (reader) CYFRA-1813 [nagra merlin] SER: ############
2021/11/10 16:56:01 20799FA0 r (reader) CYFRA-1813 [nagra merlin] CAID: 1813
2021/11/10 16:56:01 20799FA0 r (reader) CYFRA-1813 [nagra merlin] Prv.ID: 00 00 01 A0 (sysid)
2021/11/10 16:56:01 20799FA0 r (reader) CYFRA-1813 [nagra merlin] -----------------------------------------
2021/11/10 16:56:01 20799FA0 r (reader) CYFRA-1813 [nagra merlin] |id |tier |valid from |valid to |
2021/11/10 16:56:01 20799FA0 r (reader) CYFRA-1813 [nagra merlin] +----+--------+------------+------------+
2021/11/10 16:56:01 20799FA0 r (reader) CYFRA-1813 [nagra merlin] |01A0|0000 |1992/01/01 |2022/01/09 |
2021/11/10 16:56:01 20799FA0 r (reader) CYFRA-1813 [nagra merlin] |0068|0000 |1992/01/01 |2022/01/09 |
2021/11/10 16:56:02 20799FA0 r (reader) CYFRA-1813 [nagra merlin] |0065|0000 |1992/01/01 |1992/01/01 |
2021/11/10 16:56:02 20799FA0 r (reader) CYFRA-1813 [nagra merlin] |0068|0020 |1992/01/01 |2036/04/16 |
2021/11/10 16:56:02 20799FA0 r (reader) CYFRA-1813 [nagra merlin] |0068|0061 |1992/01/01 |2036/04/16 |
2021/11/10 16:56:02 20799FA0 r (reader) CYFRA-1813 [nagra merlin] |0068|0064 |1992/01/01 |2036/04/16 |
2021/11/10 16:56:02 20799FA0 r (reader) CYFRA-1813 [nagra merlin] |0068|00AA |1992/01/01 |2036/04/16 |
2021/11/10 16:56:02 20799FA0 r (reader) CYFRA-1813 [nagra merlin] |0068|00AF |1992/01/01 |2036/04/16 |
2021/11/10 16:56:02 20799FA0 r (reader) CYFRA-1813 [nagra merlin] |0068|0074 |1992/01/01 |2036/04/16 |
2021/11/10 16:56:03 20799FA0 r (reader) CYFRA-1813 [nagra merlin] |0068|0076 |1992/01/01 |2036/04/16 |
2021/11/10 16:56:03 20799FA0 r (reader) CYFRA-1813 [nagra merlin] -----------------------------------------
2021/11/10 16:56:03 20799FA0 r (reader) CYFRA-1813 [nagra merlin] Prv.ID: 00 00 00 00
2021/11/10 16:56:03 20799FA0 r (reader) CYFRA-1813 [nagra merlin] Prv.ID: 00 00 00 68
2021/11/10 16:56:03 20799FA0 r (reader) CYFRA-1813 [nagra merlin] Prv.ID: 00 00 00 65
2021/11/10 16:56:03 20799FA0 r (reader) CYFRA-1813 [nagra merlin] Prv.ID: 00 00 FE 22
2021/11/10 16:56:04 00000000 s (main) init for all local cards done

Display Spoiler

sure working
can you put here full example reader config
and bin file without emu?
Display More

Without Emu : https://www.linuxsat-support.c…4-10-3-0-without-emu-zip/

;

**samur** · Nov 7th 2021

Quote from azaz1

Quote from fegol

Quote

14:20:00 045F9A79 r (reader) CYFRA-1813 [mouse] only NUID defined - enter at least CWPK0

does not detect the CWPK key in your log

please check the oscam web interface for the CWPK keys

reason is wrong patched oscam https://www.linuxsat-support.c…ubuntu1-20-04-10-3-0-zip/
i try it as you want
dont working with cak7

Display More

Try with this one :

**samur** · Nov 6th 2021

i don't have experience about oscam with distributions , the posted version is for Ubuntu and i don't know if it works also with debian

;

**samur** · Nov 6th 2021

azaz1

what distribution you use : Ubuntu xx.xx, Debian, i686,.....?

and give more informations like oscam.server whithout keys...

####

check your config files: oscam.server, oscam.user, oscam.conf

for the 1813 works confimed above

;

**samur** · Nov 6th 2021

Quote from azaz1

where i find -x86_64 oscam for test ?

azaz1

From the first post, please report results ......and which caid ?

https://www.linuxsat-support.c…ubuntu1-20-04-10-3-0-zip/

thanks

**samur** · Nov 5th 2021

piterfree

it's not a problem of emu, recheck your config files:

oscam.server

oscam.conf

oscam.user

Or wait bingo to help you

;

**samur** · Nov 5th 2021

MAJOOR

Please can you post you reader config (oscam.server) without keys ?

and thank you

;

**samur** · Nov 5th 2021

Quote from MAJOOR

hi,
i have this on Black card,
EMM
written
UK / G / S / UQ
0 / 3 / 1 / 0

and
ECM
949 (100.00 %)

Display More

MAJOOR

what oscam are you using ?

from this thread ?

;

**samur** · Nov 4th 2021

;

######

bingo

thank you for helping and testing.....

For the EMM Issues we will continue investigating......

A+

.

Posts by samur

OSCam For Dreambox ONE/TWO [ aarch64 ], [Private build]

OSCam For Android-stapi and Amiko A4_A5 Devices, [Private build]

OSCam For sh4, sh4-stapi and sh4-stapi5 Devices !!!, [Private build]

OSCam For Octagon and others [ gx boxes_Arch:c-sky/arm ], [Private build]

OSCam For CoreELEC and Rpi3, [Private build]

OSCam cak7_support-test include (1856) For boxes [ arm, aarch64, mipsel, ]

OSCam cak7_support-test include (1856) For boxes [ arm, aarch64, mipsel, ]

Oscam linux_X86 11703 Cak7 Patch

4.8 discovery sound on but video not work

OSCam cak7_support-test include (1856) For boxes [ arm, aarch64, mipsel, ]

OSCam cak7_support-test include (1856) For boxes [ arm, aarch64, mipsel, ]

OSCam cak7_support-test include (1856) For boxes [ arm, aarch64, mipsel, ]

OSCam cak7_support-test include (1856) For boxes [ arm, aarch64, mipsel, ]

OSCam cak7_support-test include (1856) For boxes [ arm, aarch64, mipsel, ]

OSCam cak7_support-test include (1856) For boxes [ arm, aarch64, mipsel, ]

OSCam cak7_support-test include (1856) For boxes [ arm, aarch64, mipsel, ]

OSCam cak7_support-test include (1856) For boxes [ arm, aarch64, mipsel, ]

OSCam cak7_support-test include (1856) For boxes [ arm, aarch64, mipsel, ]

OSCam cak7_support-test include (1856) For boxes [ arm, aarch64, mipsel, ]

OSCam cak7_support-test include (1856) For boxes [ arm, aarch64, mipsel, ]