link of openatv softcam feed universal_4.5-r0 For all Boxes
This link is Index of /oea/4.5/ For all devices You can download whatever you like from them
Just double-click on your device's processor type, and you will be taken to the download page
for your device's processor type
http://updates.mynonpublic.com/oea/4.5/
like this
http://updates.mynonpublic.com/oea/4.5/sh4/
openvision Moving from 10.1 to version 10.2
Open Vision 10.2-r220
NB! feed changed:
Login details:
Username: root
Password: openvision
Hello Ahmed
after replacing the file, unfortunately RC does not work for me :-(
Hello sabrex11
Thanks for trying! The team has made some fixes. Wait for the new version Currently the team is v 220
Hi,
can I use this for spark too or only for Enigma?
I have not used the Spark system for five years due to the cessation of support for it. A system from the past time, Enigma is currently the prevailing system due to the availability of support for it and every day it has a new one, but try to use it with the Spark system of course, use the first file and not the ipk file nothing to lose
Download the latest version 4.5 of the attachments
Transfer ipk to /tmp
Give this command in Telent
opkg install /tmp/*.ipk
or
opkg install --force-overwrite /tmp/*.ipk
right Now softcam it becomes visible.
Thanks professor /MOHAMED_OS
oscam-svn11585-emu-r798
Changeset 11585
Code
Message:
this is an extension for cacheex and only for this !!!
it does not change any other aspects of oscam
with this extension it becomes possible to mark and filter ecms
many thanks to w33dburner and the community
for diligent testing
please report possible errors to us
Installing the emu in the old way by uploading it to the Extension / var supply and running it by plugin alternative softcam manager Suitable for old versions only
But modern versions must Installing through ipk extension
This has provided us with the extension ipk for our devices spark
The wonderful developer, professor /MOHAMED_OS
download the Same version of professor / /MOHAMED_OS topic in extension ipk
Thanks professor /MOHAMED_OS
Good luck
hi
could anybody give any ideas on my problem .I just bought a new desk top computer and am trying to set up dreambox control center programme ive downloaded it a nd installed but when i open it up and use ftp it wont show anything in my box i used to use it perfectly in my old computer never a problem ive tried a few versions of it but all the same problem
Use version 2.40 of the program DCC, it is the best & Newest you will find with full in attachments
openvision-enigma2-develop-extralanguage-10.2-r218 _ vipercombo _usb.zip as at 23/08/2020
Openvision has been updated for 10.2 instead of 10.1
http://download1483.mediafire.…2-r218-vipercombo_usb.zip
Please try the solution provided by dear friend / BarviX
Replace the file lircd.conf
File with attachments
Thank you very much, dear friend / BarviX
for your contribution to the topic to solve the problem. We hope that friends will try and respond with the result,
Because I did not install the new version
Thanks again, best wishes for you
Please try the solution provided by dear friend / BarviX
Replace the file lircd.conf
File with attachments
Replace the file lircd.conf
Thank you very much, dear friend / BarviX
for your contribution to the topic to solve the problem. We hope that friends will try and respond with the result, as I do not own it
My device is a processor 7162
Thanks again, best wishes for you
Still Remote control does not work in -10.2-r218
This was written for the team to correct the error
The reasons for the error are being searched and treated by the team, as mentioned / Persian Prince
Still Remote control does not work in -10.2-r218
This was written for the team to correct the error
The reasons for the error are being searched and treated by the team, as mentioned / Persian Prince
My friends
openvision-enigma2-develop-extralanguage-gstreamer-10.2-r218-spark 7162_usb.zip
My friends
openvision-enigma2-develop-extralanguage-gstreamer-10.2-r218-spark_usb.zip
This is a response Persian Prince for my post
Post: # 10324Post Persian Prince
Sat Aug 22, 2020 10:05 pm
Quote ahmed gazye wrote: ↑Sat Aug 22, 2020 9:58 pm In the image r215
Truman spark sti 7111 & 7162
remote control does not work.
We're on r217 so test a new version and let us know.
This is a response Persian Prince for my post
Post: # 10324Post Persian Prince
Sat Aug 22, 2020 10:05 pm
Quote
QuoteIn the image r215
QuoteTruman spark sti 7111 & 7162
remote control does not work.
We're on r217 so test a new version and let us know.
Display MoreDisplay More
My friends
openvision-enigma2-develop-extralanguage-gstreamer-10.1-r215-spark 7162_usb.zip
https://runigma.com.ua/feeds/i…5-spark7162.rootfs.tar.gz
https://runigma.com.ua/feeds/i….1-r215-spark7162_usb.zip
dear Ahmed after trying to use this version i have a big problem ..... exit button doesn't work yet
must be written to The team on his site until the repair is done otherwise nothing has been done
dreamce, wrote to the team to correct the error for spark 7111
Sat Aug 22, 2020 3:21 pm
Spark 7111 openvision 10-r215 build
remote control does not work
These users thanked the author dreamce for the post (total 2):
ALKAP (Sat Aug 22, 2020 3:43 pm) • ahmed gazye (Sat Aug 22, 2020 6:28 pm)
Starting now, Openvision r217 has been updated for 10.2 instead of 10.1
Wait for the new version with the new update after the repair
I tried this fantastic version a week ago.
It is light , stable and fast !
Thanks a lot
Please give me the raw version
The raw version with the attachments above the topic
Obviously, you have not read the topic BACKUP 94.17mb and the otherRAW version 59.96mb
