My friends
openvision-enigma2-develop-extralanguage-gstreamer-10.1-r170-spark_usb.zip
Posts by ahmed gazye
-
-
In advance we thanks Algerian developer Mino6060 to wonderful plugin
Update the skyhd spotline server in yellow button script
-
-
my friends
Please note
With reference to the Open Vision team, they stated that this method does not recommend dealing with it and represents the risk of exposure to problems with the Spark system
Spark Devices processors 7111 and 7162
Thu Jul 02, 2020 4:36 pm
No!!
This is a very terrible idea and not recommended!
I was afraid of this at some point, because unfortunately 'spark' was renamed to 'sh4'.
You move the area into the Spark area and this is only of limited size.
If you start overwriting the Spark area, it is irreversible.
Then you have to search for an existing Spark image for a long time to repair it.
In my view, the area can only be used really well to outsource 'picon' there.
I would refrain from other symlinks.
Even with a new installation, they will only lead to errors since they will not be deleted.
Your statement about the size of the image is also incorrect.
As in the OE Alliance, the e2 area is around 140mb in size. At the moment you really get everything you need well installed. -
Hi / octa8on
Try more than plugin
iptv requires a strong hard ware that is not available on Spark devices such as Ram, Processor, and Fast Net
-
My friends
openvision-enigma2-develop-extralanguage-gstreamer-10.1-r169-spark_usb.zip
-
My friends
openvision-enigma2-develop-extralanguage-gstreamer-10.1-r169-spark 7162_usb.zip
https://runigma.com.ua/feeds/i…9-spark7162.rootfs.tar.gz
https://runigma.com.ua/feeds/i….1-r169-spark7162_usb.zip
-
if you do not have the experience, does not apply to this experience, so as not to have a problem with the copy read this
Display MoreThe Spark system has become an old system and has not had an update since 2016, it is possible that the emu does not work on it and there is no emu specific to the Spark system, but if you want to try it, you can transfer the emu with the Dcc program to its extension with the Spark system as it then add your server
But this is subject to an experiment only. You can try the versions specific to the Spark devices, which are by the way all dedicated to the system enigma and not the Spark system until you work one of them with you rename the emu with the same name as the Spark system
I have not worked on the Spark system since 2016, when support for it stopped so much that I forgot that the device has this system. I think you should switch to the enigma system because it is the best and the most recent now and
it has great support
Notice
It must be distinguished between these two terms
Spark system
Spark devices
Available emu are currently dedicated to Spark devices For Enigma2 system This can be seen from the path of the emu files, you can find all of them dedicated to the path of files with Enigma system
Good luck
-
AmeerKhaled94
The Spark system has become an old system and has not had an update since 2016, it is possible that the emu does not work on it and there is no emu specific to the Spark system, but if you want to try any one with this topic,
-
AmeerKhaled94
device Hammer 5400 is not a Spark device
FULAN - Hardware : Spark STi 7162
Spark device that has the internal flash divided into two parts, each one for the system. One for Spark system
The other is related to the enigma system
-
sherif
If you want everything working with the version, wait for the final version
there is no problem without the error logo until we recognize the error and send it to the team until the error is corrected in the new version. should be noted that the team is in the development stage every two days or more, a new version in order to correct construction errors or add new ones, meaning that you do not deal with a stable copy The team is now in version 169 Whoever built coy does not have the device. Therefore, he did not try the copy on the device, but as long as the construction was done, then the copy is supposed to work.
-
My friends
new Spark devices sti7162 for amikoalien-PurE2-6.5 for test as at 30/06/2020
You can write to the version team on the next page of the forum if you want it, it is dedicated to member comments on the new version
New PurE2 v. 6.5 to test - your feedback, please...
Download from official website ...
http://www.pur-e2.club/OU/images/index.php?dir=6.5/fulan/
-
My friends
new Spark devices sti7111 for amiko8900-PurE2-6.5 for test as at 30/06/2020
You can write to the version team on the next page of the forum if you want it, it is dedicated to member comments on the new version
New PurE2 v. 6.5 to test - your feedback, please...
Download from official website ...
http://www.pur-e2.club/OU/images/index.php?dir=6.5/fulan/
-
When making rescue images, try switching with all the buttons at the front of the device, such as
ch- ch + val- val+
It is likely to work and if those buttons do not work if the problem will be solved through u-boot only
-
BACKUP-Egami-7.2.1-sparkreloaded-20200629_usb_by_bilal7at_ for spark sti 7111
First, many thanks must be given to / bilal7at
The BACKUP was built by bilal7at as at 29/6/2020
Here are some pictures from the backup by_bilal7at
Control buttons
Thanks to bilal7at
http://www.mediafire.com/file/…_usb_by_bilal7at.rar/file
-
A final advice for amrsalah45 and all friends
If you are working on external flash, and there is a problem with a copy installed on it and you want to go back to another copy, you will close the back power button and use the normal way to cross over to
another copy After close the back power button from the back, remove the external flash and use the normal way to return to the copy of the enigma installed on the internal flash first, then you can cross over to the rest of the copies after re-installing the external flash.
good luck
-
I see that you worked the topic on more than site and did not reach a solution to your problem.
Now you have two solutions and they will implement them on your personal responsibility.
The first is to make a U-boot update for the device
The topic is in the forum in the English language for the amiko-alien-shd-8900 device
Amiko Alien SHD 8900 U-Boot 1.3.1 (Oct 19 2010 - 180850)
, it is better to go to the following site because it is in Arabic and specific to your device Truman 7111 Using the file named u-boot hany
http://www.masrawysat.com/vb/showthread.php?t=2331173
The second, and it is better to go to Specialized technician to make U-boot update for the device by them because they have the experience and the necessary tools for that.
In the end, the decision is yours, but if you take my proxy advice, it is better than to go to Specialized technician instead of
the personal risk and not having enough experience and the necessary tools.
good luck
-
mohammed dz
This question has been answered more than once inside the comments on the subject. You are supposed to read the entire topic in order not to repeat the same questions. Download the emus from my topics in the forum because it belongs to the device
Display MoreHi / Octa8on
Firstly, thanks to the wonderful developer, ahmedmoselhi , who is the owner of this work
Secondly, it is he who created the feed for his own copy and he is able to repair his feed links, not me. It is clear that there is a small defect in the video, part of it has been corrected, but it has not been completely corrected byUpdate , so there are some channels that do not appear good like MBC for example and this The defect is thought to build and correct it with the developer, not me and he is a member of the Egyptian Forum that you are subscribed to and a member here you can write to him to correct the above
oscam and ncam don't work smoothly
Installing the emu in the old way by uploading it to the Extension / var supply and running it by plugin alternative softcam manager suitable for old versions only But modern versions must Installing through ipk extension
You can go to the section concerned with the forum, you will find my topics about them, download it and install it on the copy. It will work, God willing, as the following pictures
Hi / wida
It is clear that there is a small defect in the video, part of it has been corrected byUpdate , but it has not been completely corrected, so there are some channels that do not appear completely like MBC for example and this The defect is thought to build and correct it with the developer, not me and he is a member of here you can write to him to correct the above
-
Egami-7.2.1-sparkreloaded-20160426_usb_by_st7TEAM for spark sti 7111
First, many thanks must be given to / Brother Radwan & st7_TEAM
The image was built by Brother Radwan, may God reward him with all the best, despite not having the device
Although the image team did not agree to the support
As is well known, this image is one of the strongest pictures
But brother Radwan, may God reward him with good. Breaking the monopoly
This is a raw version for spark processor 7111
A gift for a friend / abdulrois & all friends
Login settings ftp
user: root
pass: root -
It is clear that you did not read the subject. The answer is at the beginning of the topic
