My friend /Saraceno84

I do not own the device, but I have transferred the copy to you those who like the experience, and this is an update of the previous version on the above and the team’s page on the following topic, the way to download from the team page

You can view it and contact the team if you have a note

BPanther Administrator

-> OK

-> UNTESTED (automatically built)

-> DEFECTIVE (changes still necessary)

Basically:

FLASH -> Flash image for the start from the flash. Write to flash with USB stick.

USB -> Image for starting from a USB stick. Tar.gz is installed on the USB stick with the MBI (MAXI Boot Installer), for example.

EXCEPTION HD51 / ZGEMMA H7 / Bre2ze 4K

FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to the box after / tmp and can then be flashed via the Extras menu.

USB -> flash image for starting from flash. Write to flash with USB stick.

MULTI -> Contains the files from Flash + USB in one package.

EXCEPTION VU + DUO 4K / VU + UNO 4K SE / VU + ZERO 4K / VU + ULTIMO 4K / VU + UNO 4K / VU + SOLO 4K

FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to / tmp on the box, renamed to kernelX.bin and rootfsX.tar.bz2 (X = partition) and can then be flashed using the Tools menu.

USB -> Contains the files for flashing from the USB stick - SingleBoot.

MULTI -> Contains the files for flashing from the USB stick - MultiBoot.

There are only MultiBoot images for VU + DUO 4K, VU + UNO 4K SE, VU + ZERO 4K, VU + ULTIMO 4K, VU + UNO 4K and VU + SOLO 4K available for FLASH and MULTI. The file names are changed slightly accordingly.

EXCEPTION VU + DUO

FLASH -> Currently not available.

USB -> Contains the files for flashing from the USB stick, but also suitable for an offline update. To do this, copy the content to / tmp on the box and flash it using the Tools menu.

MULTI -> Currently not available.

NOTE on the loader of the HD51 / ZGEMMA H7 / Bre2ze 4K and VU +

The loader version can be queried in Telnet as follows: cat / sys / firmware / devicetree / base / bolt / tag

 Good luck

Dear / Octa8on

You will find the topic with this name

Improving the work of some hardwares for Spark devices, including our Truman device, to work better despite its weakness ??? !!!

Enjoy & Good luck

Dear / Octa8on

You will find a topic about swap for me at the Egyptian forum you know. Read it and do what it contains

Enjoy & Good luck

NEW FILES ( 09/04/2020 )

-oscam.dvbapi

-oscam.srvid

-oscam.srvid2

-oscam.services

Enjoy & Good luck

CCcam.prio & CCcam.info ( 09/04/2020 )

NEW FILES

-cccam.channel info

-cccam.prio

Enjoy & Good luck

my friend / pauldb

Yes, unfortunately, the team stopped supporting the Spark devices, but it is not the only team. There are many teams that have stopped supporting the Spark devices because its production companies have stopped developing their devices

But despite that, these devices are still working and receive some support and still have the satisfaction of their users, it is the old beauty

Enjoy & Good luck

latest version PKT - 5.5 for spark sti7111 & sti7162 img.zip & .tar.gz

This is an official raw version it an old version, but the team does not support Spark devices This latest version of the team

for Spark But it still works lightly, gracefully and Pretty cool it Not available for many

download page for 2 Processor By 2 extension

http://e2.pkteam.pl/index.php?…DEN%20MEDIA/Hyperion_5_5/

Enjoy & Good luck

My friends

new Spark devices sti7111 for amiko8900-PurE2-6.5 for test as at 09/04/2020

You can write to the version team on the next page of the forum if you want it, it is dedicated to member comments on the new version

New PurE2 v. 6.5 to test - your feedback, please...

Download from official website ...

http://www.pur-e2.club/OU/images/index.php?dir=6.5/fulan/

Enjoy & Good luck

My friends

new Spark devices sti7162 for amikoalien-PurE2-6.5 for test as at 09/04/2020

You can write to the version team on the next page of the forum if you want it, it is dedicated to member comments on the new version

New PurE2 v. 6.5 to test - your feedback, please...

Download from official website ...

http://www.pur-e2.club/OU/images/index.php?dir=6.5/fulan/

Enjoy & Good luck

My friend / sopo ngiro

You can refer to my topic on the following link in the forum to built your wifi

ChipGenius_v4_19_0319 to definitions data of usb Wireless lan card & some Drivers Wireless enigma2 system in Spark devices

Good luck

My friend / hooka9999

You can write to the version team on the next page of the forum if you want it, it is dedicated to member comments on the new version

New PurE2 v. 6.5 to test - your feedback, please...

Good luck

Dear / Octa8on

freezing it happens because the a backup on The device is heavy because it has a lot of plugin to takes up all the RAM space, and therefore the RAM does not have any space. Therefore , a CacheFlush or ClearMem must be installed and the work of Swab in order to provide an amount of RAM to Provides an empty space for RAM to work good.

the nfr4 plugin Its flaw is that it does not read The swap space provided by the device for the copy, which is estimated at 25 MB of RAM Therefore, you will find the total area of the RAM you have only 113 MB, while if you installed the version in another plugin, you will find a total RAM area of 138 MB. It is calculated as follows

128 MB RAM size for the Enigma device - 15 MB system consumption for RAM+ 0 ( of the RAM space allocated for the version that does not work on the device, which is the Spark system) = 113 MB RAM size remaining for the copy.

while if you installed the version in another plugin Such as imagemanager

128 MB RAM size for the Enigma device - 15 MB system consumption for RAM+ 25 mb ( of the RAM space allocated for the version that does not work on the device, which is the Spark system) = 138 MB RAM size remaining for the copy.

You can review those RAM numbers because you did not find this explanation elsewhere

It is better to delete the copy because it is heavy on the device and requires a larger RAM

It is better to install a raw copy and add what you want better than downloading a backup that would like this

Enjoy & Good luck

My friend / ahmedmoselhi

Thank you for the wonderful work you do for us to revive our devices, which many have abandoned

Version 113 is Its introduction is great ahmedmoselhi

https://sourceforge.net/projec…13-spark_usb.zip/download

Enjoy & Good luck

gcam-2.0-emu-sh4 It works on all versions

gcam-2.1-emu-sh4 It works Some versions And other copies must be downloaded from feed version

My friend / Blindlove200

Unzip it and load the alternative cam manger file by DCC to Path

usr /lib/ engima2 / python / Plugin / extensions

Enjoy & Good luck

• AlternativeSoftCamManager.rar

My friends

Take note

There are 3 teams built neutrino image

BPanther's

DboxOldie´s

FFteam

The best versions are for a FFteam Because it has more options, light, serial, and compatible with the device, so you will find more size than other versions

This modification belongs to the team's version FFteam

The last neutrino image for your device spark 7111on my topic of the forum is on the following link

Neutrino377-MP-DDT-FFTeam-02-02-2020-Sogno-revolution-Pingulux-Plus-GM990-Sab-Amiko1-7111-Receiver

The last neutrino image for your device spark 7162on my topic of the forum is on the following link

Exclusive Neutrino3.7.1-MP-DDT-FFTeam-1- 4 -2019 -Spark 7162-Receiver.zip

Enjoy & Good luck

My bro. / Worldcup

You can get it from my forum topics for section softcam keys Spark devices , for example,

Latest OSCam Emu for sh4 spark

Latest NCam Emu for sh4 spark

A collection of the latest SoftCam & keys & Config_PowerVu for most emu as at 01/04/2020

My bro. / Worldcup

Unzip it and load the alternative cam manger file by DCC to Path

usr /lib/ engima2 / python / Plugin / extensions

 Good luck

I previously sent it to you when you requested it on the following link

OpenATV 6.3 for Spark STI 7111 & Spark 7162 Devices

Unzip it and load the alternative cam manger file by DCC to Path

usr /lib/ engima2 / python / Plugin / extensions

Enjoy & Good luck

• AlternativeSoftCamManager.rar

(26.49 kB, downloaded 7 times, last: Friday, 4:37 pm)

My friend / glucarelli

My friend congratulations on the success of the work, please explain the work steps and the type of your device for our friends with the same device to benefit

 Good luck