Hello,
I am looking for hitool dump file for sf8008 MINI device.
Would you SHARE? PLS, THX
I do not have any file for this device. Try searching on Google
Posts by ahmed gazye
-
-
pls share new spark plugin tx
nothing new spark plugin There is no support for the device currently. It has become a thing of the past
Look here
or
Spark Full Plugin with PowerVU and Tandberg auto-roll - 6-1-2017
This is an old version, but it contains a full & important plugins The most important of which is plugin_upgradeuboot.s Not available for many
use kingston or sandisk usb 4 or 8 GB
Make sure that the folder is not inside another folder, and there is no any Foldr it except Foldr plugin only.
After unzip the attached file, transfer the file named plugin to the usb and place it in the device.
It will come to you with a message. Do… -
-
-
You can go here to download the version that suits Ubuntu what you are working on
-
Display MoreDisplay MoreDisplay MoreDisplay More
rifranco202325@
Asegúrese de que su sistema Linux contenga todo lo último las bibliotecas necesarias para ejecutar el oscam, tales como:
libcrypto3/libcurl/libdvdcas/libpcsclite/libssl3/libusb
I have this enabled at the time I use the build. I don't know if to use yours you have to add something else, tell me.
Enable WITH_SSLEnable CS_ANTICASC
Enable CS_CACHEEX
Enable CS_CACHEEX_AIO
Enable CW_CYCLE_CHECK
When uploading this compilation it gives me this error
oscam-git11863-802@58c12d43-Linux-x86_64-webif-dvbapi-ssl-libusb-pcsc-libdvbcsa-emu-icam-signedroot@oscam:~# systemctl restart oscam6.service
Job for oscam6.service failed because the control process exited with error code.
See "systemctl status oscam6.service" and "journalctl -xeu oscam6.service" for details.
And the bookstores you tell me are all there, it will be something I'm missing.
root@oscam:~# ldconfig -p | grep -E "libcrypto|libcurl|libdvdcas|libpcsclite|libssl|libusb"
libusbmuxd-2.0.so.6 (libc6,x86-64) => /lib/x86_64-linux-gnu/libusbmuxd-2.0.so.6
libusb-1.0.so.0 (libc6,x86-64) => /lib/x86_64-linux-gnu/libusb-1.0.so.0
libusb-1.0.so (libc6,x86-64) => /lib/x86_64-linux-gnu/libusb-1.0.so
libusb-0.1.so.4 (libc6,x86-64) => /lib/x86_64-linux-gnu/libusb-0.1.so.4
libssl3.so (libc6,x86-64) => /lib/x86_64-linux-gnu/libssl3.so
libssl.so.3 (libc6,x86-64) => /lib/x86_64-linux-gnu/libssl.so.3
libssl.so (libc6,x86-64) => /lib/x86_64-linux-gnu/libssl.so
libpcsclite.so.1 (libc6,x86-64) => /lib/x86_64-linux-gnu/libpcsclite.so.1
libpcsclite.so (libc6,x86-64) => /lib/x86_64-linux-gnu/libpcsclite.so
libcurl.so.4 (libc6,x86-64) => /lib/x86_64-linux-gnu/libcurl.so.4
libcurl-gnutls.so.4 (libc6,x86-64) => /lib/x86_64-linux-gnu/libcurl-gnutls.so.4
libcrypto.so.3 (libc6,x86-64) => /lib/x86_64-linux-gnu/libcrypto.so.3
libcrypto.so (libc6,x86-64) => /lib/x86_64-linux-gnu/libcrypto.so
I think you are missing out libdvdcas
Could you help me fix it if you would be so kind?
Try thisCodesudo apt update sudo apt install libdvbcsa-dev -
Display MoreDisplay More
rifranco202325@
Asegúrese de que su sistema Linux contenga todo lo último las bibliotecas necesarias para ejecutar el oscam, tales como:
libcrypto3/libcurl/libdvdcas/libpcsclite/libssl3/libusb
I have this enabled at the time I use the build. I don't know if to use yours you have to add something else, tell me.
Enable WITH_SSLEnable CS_ANTICASC
Enable CS_CACHEEX
Enable CS_CACHEEX_AIO
Enable CW_CYCLE_CHECK
When uploading this compilation it gives me this error
oscam-git11863-802@58c12d43-Linux-x86_64-webif-dvbapi-ssl-libusb-pcsc-libdvbcsa-emu-icam-signedroot@oscam:~# systemctl restart oscam6.service
Job for oscam6.service failed because the control process exited with error code.
See "systemctl status oscam6.service" and "journalctl -xeu oscam6.service" for details.
And the bookstores you tell me are all there, it will be something I'm missing.
root@oscam:~# ldconfig -p | grep -E "libcrypto|libcurl|libdvdcas|libpcsclite|libssl|libusb"
libusbmuxd-2.0.so.6 (libc6,x86-64) => /lib/x86_64-linux-gnu/libusbmuxd-2.0.so.6
libusb-1.0.so.0 (libc6,x86-64) => /lib/x86_64-linux-gnu/libusb-1.0.so.0
libusb-1.0.so (libc6,x86-64) => /lib/x86_64-linux-gnu/libusb-1.0.so
libusb-0.1.so.4 (libc6,x86-64) => /lib/x86_64-linux-gnu/libusb-0.1.so.4
libssl3.so (libc6,x86-64) => /lib/x86_64-linux-gnu/libssl3.so
libssl.so.3 (libc6,x86-64) => /lib/x86_64-linux-gnu/libssl.so.3
libssl.so (libc6,x86-64) => /lib/x86_64-linux-gnu/libssl.so
libpcsclite.so.1 (libc6,x86-64) => /lib/x86_64-linux-gnu/libpcsclite.so.1
libpcsclite.so (libc6,x86-64) => /lib/x86_64-linux-gnu/libpcsclite.so
libcurl.so.4 (libc6,x86-64) => /lib/x86_64-linux-gnu/libcurl.so.4
libcurl-gnutls.so.4 (libc6,x86-64) => /lib/x86_64-linux-gnu/libcurl-gnutls.so.4
libcrypto.so.3 (libc6,x86-64) => /lib/x86_64-linux-gnu/libcrypto.so.3
libcrypto.so (libc6,x86-64) => /lib/x86_64-linux-gnu/libcrypto.so
I think you are missing out libdvdcas
-
rifranco202325@
Make sure that your Linux system contains all Latest the necessary libraries for running the oscam, such as:
libcrypto3/libcurl/libdvdcas/libpcsclite/libssl3/libusb
-
Display MoreDisplay MoreDisplay MoreDisplay MoreDisplay MoreDisplay MoreDisplay More
OSCam 11862 EMU 802 - 18/12/2024
Compile by ME
Dec 18, 2024
oscam-git11862-802@fcf0003d- oscam patched
OsCam Changelogs
config: fix empty [cache] block in oscam.conf
for armv7 devices (bin only) openssl 3
openatv 7.4 /7.5 , pure2 7.4 ,EGAMI 10.5/10.6 , OpenBh 5.4 , opendroid-7.5, openspa-8.4
openssl 3.4 +libusb1.0.27+ Lpcsc lite2.2.3+ libdvbcsa 1.1.0.32-1.1.0.64-1.1.0-128 & lib curl 8.11+libzlib1.3.1-emu- icam-neon-upx
oscam-git11862-802@fcf0003d-armv7_generic-webif-dvbapi-ssl-libusb-pcsc-libdvbcsa-emu-icam-neon-upx-signed
openssl 3.4 +libusb1.0.27+ Lpcsc lite2.2.3+libdvbcsa 1.1.0.32 + lib curl 8.11+libzlib1.3.1-emu- neon-upx
oscam-git11862-802@fcf0003d-armv7_generic-webif-dvbapi-ssl-libusb-pcsc-emu-neon-upx-signed
for armv7 devices (bin only)
For py2 & py3 &gx
openssl 1.1.1w +libusb1.0.27+libdvbcsa 1.1.0.32-1.1.0.64-1.1.0-128 + lib curl 8.11+libzlib1.3.1-emu- icam-neon-upx
oscam-git11862-802@fcf0003d-armv7_generic-webif-dvbapi-ssl-libusb-libdvbcsa-emu-icam-neon-upx-signed
openssl 1.1.1w + lib curl 8.11+libusb1.0.27+libzlib1.3.1-emu-upx
oscam-git11862-802@fcf0003d-armv7_generic-webif-dvbapi-ssl-libusb-emu-neon-upx-signed
also working on Octagon SF8008 with Define OS Just change the name to oscam-gx
Transfer it via DCC or FileZilla Client To the extension usr/local/bin
You will find it after changing the name in the attachments
for sh4 devices (bin only)
openssl 1.1.1w& libdvbcsa 1.1.0.32& libusb 1.0.27 & libzlib1.3.1+ lib curl 8.11- emu-icam-upx
oscam-git11862-802@fcf0003d-sh4_generic-webif-dvbapi-ssl-libusb-libdvbcsa-emu-icam-upx-signed
Good luck everyone
Which version suits this?
OSCam-11845-802 (Ubuntu OpenSSL-3.x.x x86_64)
PCSCThere is no version of them suits (Ubuntu OpenSSL-3.x.x x86_64)
Try this version from audi06_19
Hello, how are you, yes it could be compiled but the protocol for the omnikey pcsc is not there
I built this version for you on the hope that it will work properly
oscam-git11863-802@58c12d43-Linux-x86_64-webif-dvbapi-ssl-libusb-pcsc-libdvbcsa-emu-icam-signed
Good luck everyone
With the latter I can't get the compilation to work.
Try this version from Shahrooz
oscam-git11863-802@d4d36ee2-Linux-x86_64-webif-dvbapi-ipv6-upx
Try this version from Levi45
oscam-git11863-802-Linux-x86_64-webif-dvbapi-ssl-3.1.0-libusb-libdvbcsa-emu-icam-mixed
-
Display MoreDisplay MoreDisplay MoreDisplay MoreDisplay MoreDisplay More
OSCam 11862 EMU 802 - 18/12/2024
Compile by ME
Dec 18, 2024
oscam-git11862-802@fcf0003d- oscam patched
OsCam Changelogs
config: fix empty [cache] block in oscam.conf
for armv7 devices (bin only) openssl 3
openatv 7.4 /7.5 , pure2 7.4 ,EGAMI 10.5/10.6 , OpenBh 5.4 , opendroid-7.5, openspa-8.4
openssl 3.4 +libusb1.0.27+ Lpcsc lite2.2.3+ libdvbcsa 1.1.0.32-1.1.0.64-1.1.0-128 & lib curl 8.11+libzlib1.3.1-emu- icam-neon-upx
oscam-git11862-802@fcf0003d-armv7_generic-webif-dvbapi-ssl-libusb-pcsc-libdvbcsa-emu-icam-neon-upx-signed
openssl 3.4 +libusb1.0.27+ Lpcsc lite2.2.3+libdvbcsa 1.1.0.32 + lib curl 8.11+libzlib1.3.1-emu- neon-upx
oscam-git11862-802@fcf0003d-armv7_generic-webif-dvbapi-ssl-libusb-pcsc-emu-neon-upx-signed
for armv7 devices (bin only)
For py2 & py3 &gx
openssl 1.1.1w +libusb1.0.27+libdvbcsa 1.1.0.32-1.1.0.64-1.1.0-128 + lib curl 8.11+libzlib1.3.1-emu- icam-neon-upx
oscam-git11862-802@fcf0003d-armv7_generic-webif-dvbapi-ssl-libusb-libdvbcsa-emu-icam-neon-upx-signed
openssl 1.1.1w + lib curl 8.11+libusb1.0.27+libzlib1.3.1-emu-upx
oscam-git11862-802@fcf0003d-armv7_generic-webif-dvbapi-ssl-libusb-emu-neon-upx-signed
also working on Octagon SF8008 with Define OS Just change the name to oscam-gx
Transfer it via DCC or FileZilla Client To the extension usr/local/bin
You will find it after changing the name in the attachments
for sh4 devices (bin only)
openssl 1.1.1w& libdvbcsa 1.1.0.32& libusb 1.0.27 & libzlib1.3.1+ lib curl 8.11- emu-icam-upx
oscam-git11862-802@fcf0003d-sh4_generic-webif-dvbapi-ssl-libusb-libdvbcsa-emu-icam-upx-signed
Good luck everyone
Which version suits this?
OSCam-11845-802 (Ubuntu OpenSSL-3.x.x x86_64)
PCSCThere is no version of them suits (Ubuntu OpenSSL-3.x.x x86_64)
Try this version from audi06_19
Hello, how are you, yes it could be compiled but the protocol for the omnikey pcsc is not there
I built this version for you on the hope that it will work properly
oscam-git11863-802@58c12d43-Linux-x86_64-webif-dvbapi-ssl-libusb-pcsc-libdvbcsa-emu-icam-signed
Good luck everyone
With the latter I can't get the compilation to work.
Try this version from Shahrooz
oscam-git11863-802@d4d36ee2-Linux-x86_64-webif-dvbapi-ipv6-upx
-
Display MoreDisplay MoreDisplay MoreDisplay More
OSCam 11862 EMU 802 - 18/12/2024
Compile by ME
Dec 18, 2024
oscam-git11862-802@fcf0003d- oscam patched
OsCam Changelogs
config: fix empty [cache] block in oscam.conf
for armv7 devices (bin only) openssl 3
openatv 7.4 /7.5 , pure2 7.4 ,EGAMI 10.5/10.6 , OpenBh 5.4 , opendroid-7.5, openspa-8.4
openssl 3.4 +libusb1.0.27+ Lpcsc lite2.2.3+ libdvbcsa 1.1.0.32-1.1.0.64-1.1.0-128 & lib curl 8.11+libzlib1.3.1-emu- icam-neon-upx
oscam-git11862-802@fcf0003d-armv7_generic-webif-dvbapi-ssl-libusb-pcsc-libdvbcsa-emu-icam-neon-upx-signed
openssl 3.4 +libusb1.0.27+ Lpcsc lite2.2.3+libdvbcsa 1.1.0.32 + lib curl 8.11+libzlib1.3.1-emu- neon-upx
oscam-git11862-802@fcf0003d-armv7_generic-webif-dvbapi-ssl-libusb-pcsc-emu-neon-upx-signed
for armv7 devices (bin only)
For py2 & py3 &gx
openssl 1.1.1w +libusb1.0.27+libdvbcsa 1.1.0.32-1.1.0.64-1.1.0-128 + lib curl 8.11+libzlib1.3.1-emu- icam-neon-upx
oscam-git11862-802@fcf0003d-armv7_generic-webif-dvbapi-ssl-libusb-libdvbcsa-emu-icam-neon-upx-signed
openssl 1.1.1w + lib curl 8.11+libusb1.0.27+libzlib1.3.1-emu-upx
oscam-git11862-802@fcf0003d-armv7_generic-webif-dvbapi-ssl-libusb-emu-neon-upx-signed
also working on Octagon SF8008 with Define OS Just change the name to oscam-gx
Transfer it via DCC or FileZilla Client To the extension usr/local/bin
You will find it after changing the name in the attachments
for sh4 devices (bin only)
openssl 1.1.1w& libdvbcsa 1.1.0.32& libusb 1.0.27 & libzlib1.3.1+ lib curl 8.11- emu-icam-upx
oscam-git11862-802@fcf0003d-sh4_generic-webif-dvbapi-ssl-libusb-libdvbcsa-emu-icam-upx-signed
Good luck everyone
Which version suits this?
OSCam-11845-802 (Ubuntu OpenSSL-3.x.x x86_64)
PCSCThere is no version of them suits (Ubuntu OpenSSL-3.x.x x86_64)
Try this version from audi06_19
Hello, how are you, yes it could be compiled but the protocol for the omnikey pcsc is not there
I built this version for you on the hope that it will work properly
oscam-git11863-802@58c12d43-Linux-x86_64-webif-dvbapi-ssl-libusb-pcsc-libdvbcsa-emu-icam-signed
Good luck everyone
-
Display MoreDisplay More
OSCam 11862 EMU 802 - 18/12/2024
Compile by ME
Dec 18, 2024
oscam-git11862-802@fcf0003d- oscam patched
OsCam Changelogs
config: fix empty [cache] block in oscam.conf
for armv7 devices (bin only) openssl 3
openatv 7.4 /7.5 , pure2 7.4 ,EGAMI 10.5/10.6 , OpenBh 5.4 , opendroid-7.5, openspa-8.4
openssl 3.4 +libusb1.0.27+ Lpcsc lite2.2.3+ libdvbcsa 1.1.0.32-1.1.0.64-1.1.0-128 & lib curl 8.11+libzlib1.3.1-emu- icam-neon-upx
oscam-git11862-802@fcf0003d-armv7_generic-webif-dvbapi-ssl-libusb-pcsc-libdvbcsa-emu-icam-neon-upx-signed
openssl 3.4 +libusb1.0.27+ Lpcsc lite2.2.3+libdvbcsa 1.1.0.32 + lib curl 8.11+libzlib1.3.1-emu- neon-upx
oscam-git11862-802@fcf0003d-armv7_generic-webif-dvbapi-ssl-libusb-pcsc-emu-neon-upx-signed
for armv7 devices (bin only)
For py2 & py3 &gx
openssl 1.1.1w +libusb1.0.27+libdvbcsa 1.1.0.32-1.1.0.64-1.1.0-128 + lib curl 8.11+libzlib1.3.1-emu- icam-neon-upx
oscam-git11862-802@fcf0003d-armv7_generic-webif-dvbapi-ssl-libusb-libdvbcsa-emu-icam-neon-upx-signed
openssl 1.1.1w + lib curl 8.11+libusb1.0.27+libzlib1.3.1-emu-upx
oscam-git11862-802@fcf0003d-armv7_generic-webif-dvbapi-ssl-libusb-emu-neon-upx-signed
also working on Octagon SF8008 with Define OS Just change the name to oscam-gx
Transfer it via DCC or FileZilla Client To the extension usr/local/bin
You will find it after changing the name in the attachments
for sh4 devices (bin only)
openssl 1.1.1w& libdvbcsa 1.1.0.32& libusb 1.0.27 & libzlib1.3.1+ lib curl 8.11- emu-icam-upx
oscam-git11862-802@fcf0003d-sh4_generic-webif-dvbapi-ssl-libusb-libdvbcsa-emu-icam-upx-signed
Good luck everyone
Which version suits this?
OSCam-11845-802 (Ubuntu OpenSSL-3.x.x x86_64)
PCSCThere is no version of them suits (Ubuntu OpenSSL-3.x.x x86_64)
Try this version from audi06_19
-
how to update Satellite Frequencies list [TP list]
Using a program dcc, go to the extension home// gx>/tmp //local // enigma_ db
-
Hi all, has anyone tested the version for octagon sf 8008????thanks....
Yes but it doesn't work it has a problem
With attachments enigma2-debug & enigma2-crash
-
-
Hello friend .Where can i find the latest version for octagon sf8008 mini 4k uhd ??
Thanks
From your device Go to the > main menu > firmware > password > 0000 > update from internet
Or
type your device's IP address in any Internet search
stp update
firmware upgrade
-
OSCam 11862 EMU 802 - 18/12/2024
Compile by ME
Dec 18, 2024
oscam-git11862-802@fcf0003d- oscam patched
OsCam Changelogs
config: fix empty [cache] block in oscam.conf
for armv7 devices (bin only) openssl 3
openatv 7.4 /7.5 , pure2 7.4 ,EGAMI 10.5/10.6 , OpenBh 5.4 , opendroid-7.5, openspa-8.4
openssl 3.4 +libusb1.0.27+ Lpcsc lite2.2.3+ libdvbcsa 1.1.0.32-1.1.0.64-1.1.0-128 & lib curl 8.11+libzlib1.3.1-emu- icam-neon-upx
oscam-git11862-802@fcf0003d-armv7_generic-webif-dvbapi-ssl-libusb-pcsc-libdvbcsa-emu-icam-neon-upx-signed
openssl 3.4 +libusb1.0.27+ Lpcsc lite2.2.3+libdvbcsa 1.1.0.32 + lib curl 8.11+libzlib1.3.1-emu- neon-upx
oscam-git11862-802@fcf0003d-armv7_generic-webif-dvbapi-ssl-libusb-pcsc-emu-neon-upx-signed
for armv7 devices (bin only)
For py2 & py3 &gx
openssl 1.1.1w +libusb1.0.27+libdvbcsa 1.1.0.32-1.1.0.64-1.1.0-128 + lib curl 8.11+libzlib1.3.1-emu- icam-neon-upx
oscam-git11862-802@fcf0003d-armv7_generic-webif-dvbapi-ssl-libusb-libdvbcsa-emu-icam-neon-upx-signed
openssl 1.1.1w + lib curl 8.11+libusb1.0.27+libzlib1.3.1-emu-upx
oscam-git11862-802@fcf0003d-armv7_generic-webif-dvbapi-ssl-libusb-emu-neon-upx-signed
also working on Octagon SF8008 with Define OS Just change the name to oscam-gx
Transfer it via DCC or FileZilla Client To the extension usr/local/bin
You will find it after changing the name in the attachments
for sh4 devices (bin only)
openssl 1.1.1w& libdvbcsa 1.1.0.32& libusb 1.0.27 & libzlib1.3.1+ lib curl 8.11- emu-icam-upx
oscam-git11862-802@fcf0003d-sh4_generic-webif-dvbapi-ssl-libusb-libdvbcsa-emu-icam-upx-signed
Good luck everyone
-
-
sf8008_TANGOSEVO_multiroot_usb_18.12.2024-01.18_mmc
I compiled the _TANGOSEVO_multiroot I hope that the previous problems with it have been fixed since the professor/ zukon compiled it
at the beginning of the year, but unfortunately I found it as it is with the same problems.
The previous version is in the forum at the following link
Neutrino TANGOSEVO compilation zukon 2024
Thanks zukon
sf8008 & sf8008m_TANGOSEVO_multiroot_usb_31.01.2024-20.58_mmc
For those who love the experience and have experience, as the Neutrino version differs from the Enigma in dealing with it and is closed. It is not possible to install plugins on it other than the plugin designated for it.
linuxsat-support.com/cms/attachment/255267/
linuxsat-support.com/cms/attachment/255268/
https://mega.nz/folder/USw0UAoa#Yi6KHkFu_iqRSDJ8xwBNPAFor those who love the experience and have experience, as the Neutrino version differs from the Enigma in dealing with it and is closed.
It is not possible to install plugins on it other than the plugin designated for it.
Login/pass: root/root
Download from my MediaFire account, file size 107.56 MB
sf8008_TANGOSEVO_multiroot_usb_18.12.2024-01.18_mmcwww.mediafire.com
-
