Posts by ahmed gazye

NCam 8.9-sh4 Emu -for sh4 spark

NCam 8.9

-New patched
-Fixes some powerVU bugs
-insert hd03 and hd04 atr

ncam-8.9.sh4.rar

The best of ncam-config

ncam-config Files - 22-02-2019.rar

OSCam svn11.503- Emu -TEST as at 21/2/2019

Oscam svn11.503 Emu -TEST -Build

Thanks to audi06_19

Thanks toDreamOSat

oscam-svn11503-sh_4-webif-oscam-emu-patched.tar.gz

oscam-svn11503-sh4-webif-oscam-emu-patched.tar.gz

Good luck

OSCam svn11.503- Emu -r789 as at 18/2/2019

Oscam svn11.503 Emu -r788 -Build

Thanks to audi06_19

Thanks toDreamOSat

oscam-svn11503-sh_4-webif-oscam-emu-patched.tar.gz

oscam-svn11503-sh4-webif-oscam-emu-patched.tar.gz

Good luck

NCam 8.8-sh4 Emu -for sh4 spark

NCam 8.8

-Improvements emu
-clean implementation of the card list
-(rarely used modules are set from default on to default off (no codechange just setup switch))
-fix reset to wrong defaults
-[nemu] Changed function declaration to a more clean way
-[streamserver] Improved Compel algorithm
(Picture is more stable now with minimum glitches only at key change (every ~53 seconds). The teletext pid is also descrambled now)

ncam.sh4.zip

The new released as 16/2/2019

Download from official website ...

http://pur-e2.club/OU/images/index.php?dir=6.2/fulan/

The new released as 16 /2/2019

Download from official website ...

http://pur-e2.club/OU/images/index.php?dir=6.2/fulan/

OSCam svn11.501- Emu -r789 as at 15/2/2019

Oscam svn11.501 Emu -r788 -Build

Thanks to audi06_19

Thanks toDreamOSat

oscam-svn11501-sh_4-webif-oscam-emu-patched.tar.gz

oscam-svn11501-sh4-webif-oscam-emu-patched.tar.gz

Good luck

hi ,my friend / michaeldryfonten

I am sorry I have a Truman Top Box and I did not work on yourzgemmas, but in my machine we do the following

If you have an external flash, remove it and then disconnect the power from the device and trample on the back of the front panel of the machine until you see the angma or the basic version installed on the device. Leave the hand of the button OK and push the button on the channels next to it and choose the basic version installed on the device then DOS OK and SIP device Basic version Try it can be useful with you if your machine accepts success

First, this translated to what the site said about the new image

Currently Bonkel and Audioniek are working on an alternative to previous HDMU images for SH4 receivers. Soon you will be able to download images that have been built, tested and uploaded by Audioniek. At the moment, Audioniek will only support the receivers it can test, which is why all receivers are not supported by the past.

The images provided will be very simple and may be described as the image provided by OpenPLi, will support SH4. The following aspects come to mind in this regard:

The same basic functionality provided by OpenPLi images;

Skin: OpenPLI-HD

Enigma2 No older than 3 months (current diff2 will be used);

Gstreamer is 1.14.4, the only standard media framework, except when Flash space prohibits it. Base is provided, helper groups are good, bad and ugly.

FFmpeg at 3.4.3.

Python at 2.7.15.

pti is the non-generic type, which supports sincere software through CI modules and smart card;

There is no feed ingredients (yet);

Built from Odionics Gate. You can do this yourself if you wish.

The plan is to update the photos every two months.

Currently, the following receivers are supported:

Fortis HDbox (Fortis FS900 / 9200): USB only in tar.gz format

Octagoon 1008 (and variants, mainly FPS HS9510): USB only in the form of tar.gz

Atevio7500 (Fortis HS8200): Flash-image as .ird file for loader 6.00 (eplayer3 only, octagon compiler ID)

Fortis HS7110: USB only in umage format + rootfs.img or 6.46 or 6.47 loader

Fortis HS7420: USB only in the format of umage + rootfs.img or loader 6.36 or 6.37

Fortis HS7810A: USB only in the form of umage + rootfs.img, loader 6.26 or 6.27

Fortis HS7119: USB only in the form of umage + rootfs.img, loader 7.46 or 7.47

Fortis HS7429: USB only in the form of umage + rootfs.img, loader 7.36 or 7.37

Fortis HS7819: USB only in the format of umage + rootfs.img or loader 7.26 or 7.27

Fortis HS7119: Flash as .ird file, loader 7.40, 7.46 or 7.47, Octagon reseller ID

Fortis HS7429: Flash as .ird file, loader 7.30, 7.36 or 7.37, Octagon reseller ID

Fortis HS7819: Flash as .ird file, loader 7.20, 7.26 or 7.27, Octagon reseller ID

Spark: Flash as uImage + e2jffs2.img files

Spark7162: Flash as uImage + e2jffs2.img files

Topfield TF77X0HDPVR: fileset for playback of internal hard disks

Kathrein UFS912: USB, as tar.gz file

Catherine UFS912: Flash

To be added soon: Atevio7500 as tar.gz image, for use on USB (requires a change loader).

The installation must be direct where the basic installation instructions for the previous HDMU images must also work on these images.

Note on Topfield TF77X0HDPVR: Available files can be used to update a receiver that already works on Enigma2 while maintaining settings and recordings on your hard disk. The installation requires the first time in the recipient inventory management program to edit the file (see current instructions for more information) and will destroy the existing recordings.

Very Important Notice:

Audioniek is a photo builder, not HDMU. HDMU people are not responsible for any aspect of these images: Audioniek is. HDMU is the only host for these images, nothing more.

If there are problems, comments, or suggestions, you are invited to handle these pages in this forum.

The detailed installation instructions for each model will follow a supported future soon (English).

From the above we understand that the team did not currently support our equipment but one of the team members donated to build a picture of our equipment depends on OpenPLI, that is OpenPLI modified or developed and the first version of this project appeared today you can try it I did not try it but I will try it soon God willing due to lack of time loading Click on the link and wait for a few minutes will be loaded,

For sparks with processor 7111 direct download

File

OpenPLI Enigma2 Develop For All Fulan Spark 7111 Receivers

OpenPLI Enigma2 Develop For All Fulan Spark 7111 Receivers developed by Audioniek.

master G

Feb 15th 2019

For Sparks with processor 7162 Direct download

File

OpenPLI Enigma2 Develop For All Fulan Spark 7162 Receivers

OpenPLI Enigma2 Develop For All Fulan Spark 7111 Receivers developed by Audioniek

master G

Feb 15th 2019

OSCam svn11.499- Emu -r788 as at 13/2/2019

Oscam svn11.499 Emu -r788 -Build

Thanks to audi06_19

Thanks toDreamOSat

oscam-svn11499-sh_4-webif-oscam-emu-patched.tar.gz

oscam-svn11499-sh4-webif-oscam-emu-patched.tar.gz

Good luck

to avoid these differences between the programmers and you every day carry a file config &keys for the emu does not read where the path of reading files so you have to download all the files of the config & keys

to avoid any difference in settings between the programmers and this way does not matter where to read the files that Emu needs because it exists in the two tracks

etc / tuxbox / config

usr / keys or var / keys

Dear friends, take care of the next

From this version all Config and Softcams files will be in one path and the default is etc/tuxbox/config/

OSCam svn11.497- Emu -r788 as at 13/2/2019

Oscam svn11.497 Emu -r788 -Build

Thanks to audi06_19

Thanks toDreamOSat

oscam-svn11497-sh_4-webif-oscam-emu-patched.tar.gz

oscam-svn11497-sh4-webif-oscam-emu-patched.tar.gz

Good luck

A collection of the latest SoftCam and keys and Config_PowerVu for most emu

137 excellent file suitable for each emu Config_PowerVu

Open The paths on your PC to know everything for it

5d3075b4040d870.jpg

The paths of the file keys are move it to the track as well

usr / keys or var / keys

The paths of the file config are move it to the track as well

etc / tuxbox / config

you most add your server in server emu ( sauh as / gcam.server,oscam.server,ncam.server.......)

config.rar

keys.rar

NCam 8.7-sh4 Emu -r788for sh4 spark

NCam 8.7

-New patch
-Improvements emu
-Fix Auto Update Keys
-Fix some bugs
-Update a lot of files

From this version all Config and Softcams files will be in one path and the default is etc/tuxbox/config/

ncam.sh4.zip

The new released as 13 /2/2019

Download from official website ...

http://pur-e2.club/OU/images/index.php?dir=6.2/fulan/

The new released as 13/2/2019

Download from official website ...

http://pur-e2.club/OU/images/index.php?dir=6.2/fulan/

The devices in the Spark track are next one may be different depending on which image is being used.

var / emu

or

usr / emu

Good luck

OSCam svn11.495- Emu -r788 as at 11/2/2019

Oscam svn11.495 Emu -r788 -Build

Thanks to audi06_19

Thanks toDreamOSat

oscam-svn11495-sh_4-webif-oscam-emu-patched.tar.gz

oscam-svn11495-sh4-webif-oscam-emu-patched.tar.gz

Good luck

The new released as 9/2/2019

Download from official website ...

http://pur-e2.club/OU/images/index.php?dir=6.2/fulan/