Posts by ahmed gazye

Errors according to the pictures sent from you

There is an error connecting the internet cable between the receiver and the router, or your internet is weak

Do not mark the non-existent file as softwareinfo. loaderdb. trustedcore

canceled the mark in beside him

The best solution is to use the serial method, despite the long time, but it works Or review internet connections and speed

notice / Internet must be fast in order to be able to complete the process, especially when burning the rootfs.ext4 file, as its size is large, more than 500 MB.

burning can be used by serial, it is the same cables and method, but choose Serial with the hitool program instead of Network, but burning may take more than 3 hours, and the process also succeeds in this way

You can use the latest version of openATV Hitool Recovery Image On 26/8/2019

It also needs a strong net

In the case of weak internet, burning can be used by serial, it is the same cables and method, but choose Serial with the hitool program instead of Network, but burning may take more than 3 hours, and the process also succeeds in this way

SF8008-20190826

www.mediafire.com

Quote from Kolokotronis

Same results my friend
Really apologize to bother u all but i use all possible advices and tools and cables
mine is a COMBO so i followed the exact video instructions
Serial Port is connecting
ethernet cable is connected to network .... same subnet and ip range ..light in ethernet port of box light up and flickering but im getting timeout as u can see in the txt i am attaching

SerialPort has been connented, Please power off, then power on the device.

If it doesn't work, please try to repower on.;

Bootrom start

Boot Media: eMMC

#####################################timeout error

failed to send the head frame

Decrypt auxiliary code ...OK

failed to send the boot data

Failed to download fastboot!

Display More

There is something wrong when making a program hitool , everything with the receiver is not lit, the front screen of the receiver and the Internet port, the receiver is in a state of complete stability

You say there is light in ethernet port of box This is an error that should be turned off

check ip receiver Set it higher than the computer

like

If the ip the computer is 192.168.1.105.

Make ip the receiver 192.168.1.106

If you can transfer an image to the settings of the program hitool,and cable pictures it would be better

The receiver must be disconnected from the power supply before making a program, and at the moment the program works, immediately restart the receiver from the back power button Then everything on the receiver will not be lit the front screen and the internet entrance will not be lit

Quote from Kolokotronis

dear members and admins
I have a SF8008 COMBO 4K UHD which i bought it just for satellite feed hunting
Sadly from the very first time i used it tried to flash it with an image and because im kinda IDIOT my self i think i bricked it
Tried all the above in post.....got all the cables ....software etc
BUT i m getting this annoying error witch makes me want to put it in the dusbin

Please check attached text file
THANK YOU ALL

Display More

This is a connection error, check the cables and the way well

It also needs a strong net

In the case of weak internet, burning can be used by serial, it is the same cables and method, but choose Serial with the hitool program instead of Network, but burning may take more than 3 hours, and the process also succeeds in this way

Connect the receiver to the router with an RJ45 cable

Provided that the computer is shared with the same router

To connect the computer to the receiver

Cable jack-rs232 (3.5mm)

Same explanation for the same topic from the forum openatv

Added to the first post

[HowTo] SF8008 Full Recovery mit Hitool

New openvision-e2-extralanguage-py2-7.7-r411-spark 7162 _usb.zip & tar.gz 11/02/2023

In the first post

New openvision-e2-extralanguage-py2-7.7-r411-spark _usb.zip & tar.gz 11/02/2023

In the first post

BPanther's Neutrino - v3.xx for spark 7111 06/02/2023

In the first post

Same explanation for the same topic from the forum openspa Explanation with pictures

Added to the first post

"Octagon Define 6.4 linuxos/octagon_sf8008-v1.06.10 _20230127

on line

Quote from pascal46

Hello. Can someone remove the DUMP from the receiver? :düşünen yüz:

how does the receiver work if you remove the DUMP from it

You are killing the receiver

However, any lift can be extracted or uploaded DUMP from the receiver for use when necessary

it don't need installation

After unzip them transfer them through a program dcc,

to emu or cam in the extension usr or var depending on the version you have

if you using Plugin AlternativeSoftCamManager

The version is old and the Python & Enigma files are outdated. If you try to add the new Python files to the version, the Version will drop. Use older OSCAM versions or download a OSCAM from the team server.

To use the modern OSCAM versions, the Enigma version must be changed to a newer version

In the attachments are two copies of Oscam, use one of them or search here

Thread

OSCam 11936 EMU 802 & icam & gx & sh4 & Linux-x86_64 & oscam-emu.patch

OSCam svn11.441-sh4- Emu -r780 as at 17/12/2018






OSCam svn11.441 Emu -r780 -
OSCam SVN Repository history - Changeset [11441] felixka 16.12.2018 19:39:53
[gbx]
- improve REMM feature
- show remm req in webif
- gbx webif cosmetics/improvements
- fix typos from r11437 thx @sattotal
- remove ccc stuff from gbx page when ccc not compiled in
- webif: display 'use_gpio' on physical readers only






OSEMU GIT Repository history
- [osemu] Bump version to r780
- Merge branch 'oscam-svn'
- [powervu] Added…

ahmed gazye

Dec 18th 2018

Good luck.

type the following command in telnet

opkg update

opkg upgrade

If the process did not work for you, Move them manually

unzip the following files and transfer them through a program dcc, just walk with the file path

Quote from ashraf10milan

Quote from ahmed gazye

Quote from ashraf10milan

this message i get when i try to install any version of oscam emu

Download the attached file and send it to the extension Tmp via a program DCC And type the following command in telnet

Code

Code

opkg install --force-overwrite --force-downgrade /tmp/*.ipk

sorry to bother you but i've got this message too is there any solution or u can help me to tell me the path of this fil maybe it works

Forget the previous files and install the following files

Download the attached file and send it to the extension Tmp via a program DCC And type the following command in telnet

opkg install --force-overwrite --force-downgrade /tmp/*.ipk

Quote from ashraf10milan

this message i get when i try to install any version of oscam emu

Download the attached file and send it to the extension Tmp via a program DCC And type the following command in telnet

Code

opkg install --force-overwrite --force-downgrade /tmp/*.ipk

Quote from ashraf10milan

My Big Brother Mr/Ahmed Gazye i hop u help me i can't install any kind of oscam emu on this image can u help me with this big problem and i will be thankful for you.

Download the attached file and send it to the extension Tmp via a program DCC And type the following command in telnet

opkg install --force-overwrite --force-downgrade /tmp/*.ipk

Quote from ray.vincent5

Does anyone advise as to where I can get Enigma 2 images for Amiko Alien 2 triple tuner receiver?

Given this receiver with pure2 v6.5

would like to try Open ATV etc but can't find any relevant info?

here

Spark STI 7162 Images

Quote from saropoggi

All Enigma 2 ist sehr Driver

But Spark devices do not contain Tvùsat Modul wecam oder 4k