Posts by ahmed gazye

Quote from pascal46

Quote from ahmed gazye

Quote from Augusto Silva

extensions /infopanel (ipkg adlı modül yok)

Eklentilerden çıkarken sekizgen sf8008'im bu mesajı veriyor Eklentiyi zaten silmeye çalıştım ama sistem birisinin yardım etmesine izin vermiyor?

Cihazın sahibi değilim ve deneyimlemek isteyenler için getirdim.

Konuda eklenti yok

Konuşan herhangi bir eklenti hakkında

Display More

Hello, I downloaded tol but I can't install it. there may be a problem with the file

Display More

Follow the video explanation and use the required tools, the most important of which is the required cable

81tdSUV5ycL._SL1500_.jpg

1658317840051.png

Same explanation for the same topic from the forum openspa

Quote from pascal46

Quote from ahmed gazye

Quote from pascal46

böyle kalıyor

Yalnızca openeight-6.8-sf8008_recovery_emmc.zip dosyasını yüklediniz mi?

yes i uploaded

The solution is to follow the steps and tools my topic in the forum on the following link

Thread

How to solve the problem of OCTAGON SF8008 stuck on BOOT by yourself ? from ​Electro Yassine

linuxsat-support.com/cms/attachment/182532/







How to solve the problem of OCTAGON SF8008 stuck on BOOT by yourself?

A thousand thanks to the wonderful / Electro Yassine

The audio is in Arabic to / Yassine

youtube.com/watch?v=faz1KCRQ4e…D8%A7%D8%AAELECTROYASSINE



links Tools



https://www.mediafire.com/file…HiTool-STB-5.0.8.zip/file

https://mega.nz/file/x3RzECQb#…qUFHjKB1CeXWmIrTRhrx3ME1s

https://www.mediafire.com/file…tb48jro/PL2303GT.rar/file




Same explanation for the same topic from the forum openspa …

ahmed gazye

Nov 18th 2021

Quote from pascal46

it stays like this

Did you install openeight-6.8-sf8008_recovery_emmc.zip only

Quote from pascal46

tamam yapıyorum. Tanımlar güncellemede benim donuyor, tekrar başlamıyor, bu sorunum

Delete the version defineos from the device by Multiboot Deletion from Recovery menu

I think it is the cause of the problem & install openeight-6.8-sf8008_recovery_emmc.zip only Let's see The result

for the installation of the recovery, openeight-6.8-sf8008_recovery_emmc.zip

The file must be unzip by winzip or winrar

And transfer all the files inside it to a Fat32 usb flash drive

And connect a USB flash drive with the SF8008 receiver

openeight-6.8-sf8008_recovery_emmc.zip after unzip like this

And to enter the recovery

power off

We operate the device from the back and we are pressing the front power button

boot

Updt

DECO

And we choose

Flash Image Recovery

We are waiting for the installation to finish

Quote from akhlaque

openatv py2 dreamsat panel sh4 share

To install plugin dreamsat panel for all devices and Python 2 and 3

wget -q "--no-check-certificate" http://ipkinstall.ath.cx/ipk-install/DreamSatPanel/installer.sh  -O - | /bin/sh

Quote from SALIM2015

Thank you so much Mr Ahmed Gazye. I believe I can hope for more help. My first question: Is revcam server up or down nowadays (told it was under maintenance )? Does it open any scrambled channels on Nilesat 7w, HellasSat 39e , yahsat 52 e or utelsat 36 e?

Sorry I dont own revcam server

Quote from SALIM2015

Thanks Mr AHMED GAZYE, I managed to redeem the familiar octagon associated with the slot I installed the openeight 6.8 only ... What I REALLY WANTED was to get rid of the persistent HISILICON LOGO.

Use the attached file via usb

Quote from pascal46

hello i did what you said, same thing happens

Watch here

Quote from faouzi70

Pas de soft pour x88 avec multiboot

This explanation is for sf8008 device only

Quote from pascal46

I don't quite understand what you said, I don't know enigma2 very well

for the installation of the recovery, openeight-6.8-sf8008_recovery_emmc.zip

The file must be unzip by winzip or winrar

And transfer all the files inside it to a Fat32 usb flash drive

And connect a USB flash drive with the SF8008 receiver

openeight-6.8-sf8008_recovery_emmc.zip after unzip like this

1657592448494.png

And to enter the recovery

power off

We operate the device from the back and we are pressing the front power button

boot

Updt

DECO

And we choose

Flash Image Recovery

We are waiting for the installation to finish

Then we pass to install the Define image

Network Multiboot Image Upgrade

SlotSelect

EMMC slot 2

ImageSelect

Octagon Define 6.4 Os v1.06.06_20230106_mmc.zip

Start Upgrade

We can also install the Define image from Recovery

USB Multiboot Image Upgrade

And the image should be octagon_sf8008-v1.06.06_20230106_mmc.zip

It is on a USB fat32 flash drive

And if the image does not accept the installation, the device must be formatted from recovery And try again

http://www.openeight.de/images/sf8008/openeight-6.8-sf8008-20230108_recovery_emmc.zip

http://define-sw.dyndns.tv/octagon/sf8008/octagon_sf8008-v1.06.06_20230106_mmc.zip

Good luck

50a6c3be0824.png

Quote from pascal46

I did the instructions you said, I installed defineos in slot 2, it stayed in the update

Delete the version defineos from the device by Multiboot Deletion from Recovery menu

I think it is the cause of the problem

Quote from pascal46

ok

The Release must be unziped and loaded into a usb format to fat 32

Good luck

Quote from pascal46

Openeight 6.8 recovery i uploaded it. I guess it didn't work, I don't know where is the problem

Try open spa recovery

https://openspa.webhop.info/Descarga%20de%20Im%C3%A1genes/Octagon/SF8008/openspa-8.0.003-sf8008-20221223_recovery_emmc.zip

openeight 6.8 password ?

user: root

pass: openeight

Quote from pascal46

Quote from ahmed gazye

Quote from pascal46

Hello, after the update took place on the sf8008 device, it did not start again after it was installed, the device was turned off and restarted, the update updates were the same again, what is the problem?

When you delete the version from the device with Multiboot Deletion from the recovery menu, kde is re-installed as a new version that is sold empty.

I did as you said, I reinstalled and it still remained updating.

:Translate:

Display More

First Delete the version from the device by Multiboot Deletion from Recovery menu

and re-install as a new version in empty sold

you must provide enough information to know the reason

Does the device stop working permanently on all versions?

What is the name of the installed version As a recovery image for device in slot1

The best recovery image for the SF-8008 is the original image for the device openeight 6.8.1

&open atv & open spa

the following Important note :

For processor spark sti7162

There are two conversion groups and each group accepts the transfer only for itself

The first group :

Galaxy Innovations Avatar 2+ Avatar 3 * Visionnet Falcon * Icecrypt S3700 CHD * Truman Top Box 2 Tuners * Samsat Linux 2 * Dynavision 7162 * Superbox Z500 * Sogno Spark Triple

the second group:

* Golden Media Spark Triplex * Golden Media Spark One

* SAB Unix Triple HD * Amiko Alien 2 * Startrack SRT 2020 HD Plus

Quote from Julesd

Happy new year everyone!

I am trying to get my SAB Unix triple HD box working again.

I am really struggling with this. i am trying to reflash but whatever software I try it won't seem to install.

It now won't do anything. Just stays at load 49.

Can anyone help me recover it please?

Thanks.

Regards,

Jules.

Display More

Go back to my topic in the forum below

Thread

Method of passing the rescue-image​​ for Spark devices using Cisco TFTP Server

linuxsat-support.com/cms/attachment/139070/







Method of passing the rescue-image for Spark devices using Cisco TFTP Server



In some cases Spark devices not accept soft rescue in by usb

Most of the problems of not accepting the rescue-image will be a defect from the usb that the device cannot read from
So we will use passing the rescue-image for Spark devices using Cisco TFTP Server



We connect the computer with the receiver with a regular Ethernet network cord














Then we enter the network settings into…

ahmed gazye

Mar 15th 2020

Use rescue-image from my topic below

Thread

Golden Media ONE Triplex Spark sti 7162 Rescue Image 1.2.65

GM_Spark_ONE_Triplex_Rescue-image_1.2.65 for sti 7162









First, remove any external flash that is installed on the device

Second, start with this solution and implement what is contained in it
Close the device from the power button in the back and Click on the ok from the front of the receiver for 5 seconds, then not leave ok, and

open the device from power button in the back,Until it Appears on the screen is forc supported you from Ok, then you Click on the channel buttons next to it until the…

ahmed gazye

Mar 7th 2020

or my topic below

Thread

Amiko Alien 2 spark sti 7162 rescue image v1.2.65

spark_rescue_image_Amiko_Alien2_v1.2.65 for sti 7162








First, remove any external flash that is installed on the device

Second, start with this solution and implement what is contained in it
Close the device from the power button in the back and Click on the ok from the front of the receiver for 5 seconds, then not leave ok, and

open the device from power button in the back,Until it Appears on the screen is forc supported you from Ok, then you Click on the channel buttons next to it until the word…

ahmed gazye

Mar 7th 2020

Quote from SALIM2015

Hello every one , My

octagon sf8008 got stuck at boot… I used (openvix-6.3.001.release-sf8008_recovery_emmc) to address the problem – I lost the familiar octagon logo … how to redeem it?

choose OPENEIGHT 6.8_recovery_emmc as the internal image

The best are the original images of the sf8008

openeight6.8

define6.4

It will bring back the familiar octagon logo & It is the most stable It also has a unique feature, as it is the only image that allows us to back up all Enigma 2 images installed on the msd memory card Without falling into the crash, that is, the backup process was not completed successfully

To change the boot image

Use LogoMatik

with attachments

pasted-from-clipboard.jpg

Post

Enigma2 LogoMatik Xorion BootLogo Maker

linuxsat-support.com/filebase/file/177/

ZYGA

Jan 15th 2013

Quote from pascal46

Hello, sf8008 got stuck after updating the device, there was no restart, I turned off the device and restarted it, when I updated again, the same stuck happened, what is the problem, what can we do?

Delete the version from the device by Multiboot Deletion from Recovery menu

and re-install as a new version in empty sold

"Octagon Define 6.4 OS V1.06.06 linuxos","http://define-sw.dyndns.tv/octagon/sf8008/octagon_sf8008-v1.06.06_20230106_mmc.zip"

http://define-sw.dyndns.tv/octagon/sf8008/octagon_sf8008-v1.06.06_20230106_mmc.zip