Posts by blackmail

channel 5hd clears ok but none of the other channels do
2012/12/05 12:37:26 4C602700 c cccam (0963&000000/CC38/5F:02B7): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2012/12/05 12:37:27 4C602700 c cccam (0963&000000/0F12/44:72B6): found (126 ms) by mysmartcardreader (of 1 avail 1)

sorry to hijack thread but i have th same problem oscam outputs

2012/12/05 11:24:12 1E266700 c cccam (0963&000000/178E/5F:6797): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2012/12/05 11:24:20 1E266700 c cccam (0963&000000/178E/5F:4908): rejected group (0 ms) (of 0 avail 0) (no matching

reader)

oscam.conf

[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1

[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 192.168.0.0-192.168.254.254
httprefresh = 15

# protocols
[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000;
# replace **** with your CAID

[reader]
label = mysmartcardreader
protocol = smartreader
device = 002:002
#if you use smartreader and device with a bus id, hash out detect as its not needed.
detect = cd
cardmhz = 600
mhz = 600
boxid = ******
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
ecmwhitelist = 0963:3E,4E,4F,42,44,45,47,53,54,61,6A,6B,6D,6E,6F, 62,67,68,69,7A,7C,7D,7E,71,72,73,77,78,79,80,8B
group = 1
caid = 0963

account]
user = cccam
pwd = cccam
monlevel = 0
uniq = 0
group = 1
au = 1
caid = 0963

I get a black screen on all channels i select even though i see the box connected

when i try to load this i get the error

wget: unable to resolve host address `cdnetworks-us-2.dl.sourceforg...-1.0.8.tar.bz2'

is this link still active is ther another link for to install service

Been on this for a week and i think i am close my problem is i am gettin this error when i start oscam

2012/11/30 13:42:55 9E23C700 c root (0963&002004/0F17/80:F5AF): rejected user ident (0 ms) (of 0 avail 0) (no card support 0963:002004)

this is my config can you tell me where I am goin wrong please

WEBINFO USERNAME :admin
WEBINFO PASSWORD :*****
TELNETINFO USERNAME :root
TELNETINFO PASSWORD :dreambox
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME :0
OSD USERNAME :root
OSD PASSWORD :dreambox
OSD PORT :80
SHOW TIMING : yes
DEBUG : no
NEWCAMD CONF : no
SHOW EXTENEDED CLIENT INFO : yes
MINI OSD : no
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
PROVIDERINFO FILE : /var/etc/CCcam.providers
CAID PRIO FILE : /var/etc/CCcam.prio
LOG WARNINGS : /tmp/warnings.txt
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
#STATIC CW FILE : /var/keys/constant.cw
#BOXKEY:
#SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000

N: 127.0.0.1 34000 cccam cccam 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

N: 127.0.0.1 10000 cccam cccam 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

F: test test 0 0 0 { 0:0:1 } { } { }

[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1

[webif]
httpport = 8888
httpuser = ****
httppwd = ****
httpallowed = 192.168.0.0-192.168.254.254
httprefresh = 15

[reader]
label = ***uk
protocol = pcsc
device = 0
caid = 0963
boxid = *****
ecmwhitelist = 0963:3E,4E,42,44,45,47,6A,6B,6F,62,68,69,7C,7D,7E,72,73,77,79,80,8B
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1

[newcamd]
key = 0102030405060708091011121314
port = 34000@0963:000000

I am running ubuntu with a smargo on the auto intall script, but all i am getting is this error message

2012/11/30 13:42:55 9E23C700 c root (0963&002004/0F17/80:F5AF): rejected user ident (0 ms) (of 0 avail 0) (no card support 0963:002004)

can anyone please tell me where I am going wrong

I connected my oscam to my cccam but when i start oscam I am getting this error

700 c root (0963&003411/0EEB/67:5E7D): rejected user ident (0 ms) (of 0 avail 0) (no card support 0963:003411)

do you know what i have to change

my cccam shows me

Current time 12:06:58
NodeID: a919af6c413791b4
Uptime: 00d 08:07:56
Connected clients: 1
Active clients: 1
Total handled client ecm's: 0
Total handled client emm's: 0
Peak load (max queued requests per workerthread): 1

it tellls me that the client is connected but when i look in oscam i di not see any connection to my card i think i am nearly there

I have the same sorta the same problem but i have one box in mine and one at my dads, i have ubuntu and cccam 2.13 and a smargo reciever my oscamtells me that "all local cards are initalised" but I do not get any entiltlements.
i will post my cccam files can you tell me where i am going wrong please

Welcome to CCcam 2.1.3 server

Connected clients: 0
+---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
| Username| Host | Connected | Idle time | ECM | EMM | Version| Last used share | Ecm time |
+---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
+---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+

+---------+---------------------------------------+
| Username| Shareinfo |
+---------+---------------------------------------+
+---------+---------------------------------------+

Connected clients: 0
0 ACTIVE CLIENTS IN LAST 20 SECONDS
+---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
| Username| Host | Connected | Idle time | ECM | EMM | Version| Last used share | Ecm time |
+---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
+---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+

+---------+---------------------------------------+
| Username| Shareinfo |
+---------+---------------------------------------+
+---------+---------------------------------------+

Connected clients: 0
+---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
| Username| Host | Connected | Idle time | ECM | EMM | Version| Last used share | Ecm time |
+---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
+---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+

+---------+---------------------------------------+
| Username| Shareinfo |
+---------+---------------------------------------+
+---------+---------------------------------------+

Server connections: 3
+----------------------+------------+-------+--------+----------------+-------+-------------------------------+
| Host | Connected | Type | Version| NodeID | Cards | CAID/Idents |
+----------------------+------------+-------+--------+----------------+-------+-------------------------------+
|192.168.1.**:8888 |00d 02:34:**|camd3 | | | 1 | |
|127.0.0.1:15500 | |newcamd| | | 0 | |
|127.0.0.1:10000 | |newcamd| | | 0 | |

+----------------------+--------+----+-------+----------+-------+-------+
| Host | Type |Caid| System| Providers|Uphops | Nodes |
| | | | | |Maxdown| |
+----------------------+--------+----+-------+----------+-------+-------+
|192.168.1.**:8888 |camd3 | **|nds | |0 7 | |
+----------------------+--------+----+-------+----------+-------+-------+

Available providers:

+----+----------+--------------+-----+
|Caid| Provider | Provider Name| System|
+----+----------+--------------+-----+
+----+----------+--------------+-----+

also I cannot get out to the net to connect via dyndns
my thanks in advance
BM

+----------------------+------------+-------+--------+----------------+-------+-------------------------------+

hello i have a linux server running clear os 5.2 and i am tyrying to install my infinty usb on it but the commands in the tutorial are not working on putty. can anyone point me in the direction of the tutorial for 5.5

sorry false alarm yum instead of apt-get

thanks