Clients no Connecting on CCcam 2.1.3 Ubuntu server + Smargo Reader

There are 6 replies in this Thread which was already clicked 3,560 times. The last Post () by blackmail.

  • Hi All,


    I have my CCcam 2.1.3 server on Ubuntu 10.4 + smargo reader.
    I also set up my No-Ip. address and portforwarded my Lynksis router WRP 400.
    I checked the port OK with both www.youcanseeme.org and http://www.yougetsignal.com/



    ###################################
    ####my CCcam.cfg in SERVER as follows#########
    ###################################



    SERVER LISTEN PORT : ABCDE
    ALLOW TELNETINFO: yes
    ALLOW WEBINFO: yes
    WEBINFO USERNAME :xxxxxxxx
    WEBINFO PASSWORD :xxxxxxxxx
    TELNETINFO USERNAME :xxxxxxxxxx
    TELNETINFO PASSWORD :xxxxxxxxx
    TELNETINFO LISTEN PORT : 16000
    WEBINFO LISTEN PORT : 16001
    ZAP OSD TIME :0
    OSD USERNAME :root
    OSD PASSWORD :dreambox
    OSD PORT :80
    SHOW TIMING : yes
    DEBUG : no
    NEWCAMD CONF :no
    DISABLE EMM : no
    EXTRA EMM LEVEL : yes
    MINI OSD : yes
    BOXKEY: /dev/sci0 zz zz zz zz
    PIN : /dev/sci0 1234
    SOFTKEY FILE : /var/keys/SoftCam.Key
    AUTOROLL FILE : /var/keys/AutoRoll.Key
    STATIC CW FILE : /var/keys/constant.cw
    CAID PRIO FILE : /var/keys/CCcam.prio
    PROVIDERINFO FILE : /var/etc/CCcam.providers
    CHANNELINFO FILE : /var/etc/CCcam.channelinfo
    LOADBALANCE : /dev/ttyUSB0 /dev/ttyUSB1
    SERIAL READER : /dev/ttyUSB0 smartreader+
    SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 3580000
    MINIMUM CLIENT VERSION : 2.0.1
    EMM THREADS : 4
    MINIMUM DOWNHOPS: 1
    #LOG WARNINGS : /tmp/warnings.txt



    #######################################
    ##### Adding my Internal CS #################
    #######################################


    F: Share1 SittingRoom
    F: Share2 MasterRoom
    F: Share3 KidsRoom



    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


    Now I set my receivers as follows:



    *****Box1 in sitting room: SAB UNIX_SOLO


    1- in var/keys/CCcam.cfg
    C: my.no-ip.com ABCDE Share1 SittingRoom


    2 - var/tuxbox/config/oscam.server
    [reader]
    label = cccam_server
    protocol = cccam
    device = fulgas.brasilia.me, ABCDE
    account = Share1, SittingRoom
    group = 1
    cccversion = 2.2.1
    ccmaxhops = 2


    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    ******Box2 Master room: DM500S


    in var/etc/CCcam.cfg
    C: my.no-ip.com ABCDE Share2 MasterRoom



    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    *******Box3 Kids room: OPENBOX S10


    in var/keys/CCcam.cfg
    C: my.no-ip.com ABCDE Share3 KidsRoom


    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    The CCcam info ( http://127.0.0.1:16001.) shows



    Welcome to CCcam 2.1.3 server



    Current time 11:16:28
    NodeID: xxxxxxxxxxxxx
    Uptime: 00d 01:16:26
    Connected clients: 0
    Active clients: 0
    Total handled client ecm's: 0
    Total handled client emm's: 0
    Peak load (max queued requests per workerthread):
    I can see the card entitlements


    #######Active Clients page###################################################
    Connected clients: 0
    0 ACTIVE CLIENTS IN LAST 20 SECONDS
    +---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
    | Username| Host | Connected | Idle time | ECM | EMM | Version| Last used share | Ecm time |
    +---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
    +---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+


    +---------+---------------------------------------+
    | Username| Shareinfo |
    +---------+---------------------------------------+



    ###############Clients Page######################################
    Connected clients: 0
    +---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
    | Username| Host | Connected | Idle time | ECM | EMM | Version| Last used share | Ecm time |
    +---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
    +---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+


    +---------+---------------------------------------+
    | Username| Shareinfo |
    +---------+---------------------------------------+
    +---------+---------------------------------------+


    ##############Servers Page#################################


    Server connections: 1
    +------------------------+------------+---------+--------+----------------+-------+-------------------------------+
    | Host | Connected | Type | Version| NodeID | Cards | CAID/Idents |
    +------------------------+------------+---------+--------+----------------+-------+-------------------------------+
    |my.no-ip.com.address: port| |CCcam-s2s| | | 0 | |
    +------------------------+------------+---------+--------+----------------+-------+-------------------------------+



    ###############Shares page#####################
    Available shares: 1


    +----------------------+------------+----+-------+----------+-------+-------+
    | Host | Type |Caid| System| Providers|Uphops | Nodes |
    | | | | | |Maxdown| |
    +----------------------+------------+----+-------+----------+-------+-------+
    |/dev/ttyUSB0 |smartreader+| 963|nds |0 |0 xx | |
    +----------------------+------------+----+-------+----------+-------+-----


    +---------+---------------------------------------+



    ##############Providers page###############


    Available providers:


    +----+----------+--------------+-----+
    |Caid| Provider | Provider Name| System|
    +----+----------+--------------+-----+
    | 963| |*** UK (28E) |nds |
    +----+----------+--------------+-----+


    ################Entitlement page#################


    card reader /dev/ttyUSB0
    handled 0(0) ecms and 0(0) emms
    Nds card xxxxxxxxx


    Entitlement info
    003 17-07-2012
    00b 17-07-2012
    0010 17-07-2012
    001d 17-07-2012
    30e1 17-07-2012
    30e2 17-07-2012
    30e3 17-07-2012
    30e4 17-07-2012
    30e5 17-07-2012
    b732 17-07-2012
    b736 17-07-2012
    b765 17-07-2012
    b766 17-07-2012
    b772 17-07-2012
    b773 17-07-2012
    b846 17-07-2012
    b860 17-07-2012



    My question: What am I doing wrong that none of my boxes cannot connect to the server? Please help !!!!!!!!!!!!!!!!!!!!!


    Thank you in Advance

  • Hi Ten Below ...


    I now see why you don't reply my stupid questions.. I just try the SAB and It is working like a rock


    I going to get my shower and change the other ones


    Thanks a million


  • I have the same sorta the same problem but i have one box in mine and one at my dads, i have ubuntu and cccam 2.13 and a smargo reciever my oscamtells me that "all local cards are initalised" but I do not get any entiltlements.
    i will post my cccam files can you tell me where i am going wrong please


    Welcome to CCcam 2.1.3 server


    Connected clients: 0
    +---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
    | Username| Host | Connected | Idle time | ECM | EMM | Version| Last used share | Ecm time |
    +---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
    +---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+


    +---------+---------------------------------------+
    | Username| Shareinfo |
    +---------+---------------------------------------+
    +---------+---------------------------------------+



    Connected clients: 0
    0 ACTIVE CLIENTS IN LAST 20 SECONDS
    +---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
    | Username| Host | Connected | Idle time | ECM | EMM | Version| Last used share | Ecm time |
    +---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
    +---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+


    +---------+---------------------------------------+
    | Username| Shareinfo |
    +---------+---------------------------------------+
    +---------+---------------------------------------+



    Connected clients: 0
    +---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
    | Username| Host | Connected | Idle time | ECM | EMM | Version| Last used share | Ecm time |
    +---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
    +---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+


    +---------+---------------------------------------+
    | Username| Shareinfo |
    +---------+---------------------------------------+
    +---------+---------------------------------------+


    Server connections: 3
    +----------------------+------------+-------+--------+----------------+-------+-------------------------------+
    | Host | Connected | Type | Version| NodeID | Cards | CAID/Idents |
    +----------------------+------------+-------+--------+----------------+-------+-------------------------------+
    |192.168.1.**:8888 |00d 02:34:**|camd3 | | | 1 | |
    |127.0.0.1:15500 | |newcamd| | | 0 | |
    |127.0.0.1:10000 | |newcamd| | | 0 | |



    +----------------------+--------+----+-------+----------+-------+-------+
    | Host | Type |Caid| System| Providers|Uphops | Nodes |
    | | | | | |Maxdown| |
    +----------------------+--------+----+-------+----------+-------+-------+
    |192.168.1.**:8888 |camd3 | **|nds | |0 7 | |
    +----------------------+--------+----+-------+----------+-------+-------+


    Available providers:


    +----+----------+--------------+-----+
    |Caid| Provider | Provider Name| System|
    +----+----------+--------------+-----+
    +----+----------+--------------+-----+



    also I cannot get out to the net to connect via dyndns
    my thanks in advance
    BM


    +----------------------+------------+-------+--------+----------------+-------+-------------------------------+

    • Official Post


    Firstly are you looking in the correct place to see entitlements ?
    [h=3]How To See Your Card Entitlements When Using Oscam[/h]
    As always for us to help you we really need to see how you have it configured, otherwise we are just guessing.

  • my cccam shows me


    Current time 12:06:58
    NodeID: a919af6c413791b4
    Uptime: 00d 08:07:56
    Connected clients: 1
    Active clients: 1
    Total handled client ecm's: 0
    Total handled client emm's: 0
    Peak load (max queued requests per workerthread): 1


    it tellls me that the client is connected but when i look in oscam i di not see any connection to my card i think i am nearly there

  • I connected my oscam to my cccam but when i start oscam I am getting this error


    700 c root (0963&003411/0EEB/67:5E7D): rejected user ident (0 ms) (of 0 avail 0) (no card support 0963:003411)


    do you know what i have to change

Your resource for Linux TV servers and smart card readers.

Find software downloads, drivers, and support for server setup and card-sharing configurations. Set up a Linux-based TV server. Access downloads and support for server software and USB card readers for advanced TV reception and management

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!