try with tuner A
I use tuner B for my satellite reception. Tuner A was automatically configured for Terrestrial which we never use here. And I don`t even know how to remove it.
try with tuner A
I use tuner B for my satellite reception. Tuner A was automatically configured for Terrestrial which we never use here. And I don`t even know how to remove it.
Checkout KINGOFSAT EUTELSAT 9B(9ºE) for exact frequencies as there were some changes made today 17.07.2017
Thank you cazuela
But I get this issue with any blind scan that I do on any satellite. Here is a screenshot of 13e and the thread`s detail https://linuxsat-support.com/t…d-scan-issue-on-open-atv/
So what is the problem with Blind Scan? Is anyone else facing this issue?
i have already answered to you 2 or 3 times ,for help. And you are not in position to criticize me.
i dont have any prb with no 1 . but you are looking for Sat learning lessons not help . try also http://www.google.com it helps
I`m not criticizing you but your condescension. And not everything or every answer can be found on google. And you should comment on HbbTV issue if you must "say" something otherwise don`t pollute my thread. If you can`t read and understand the thread well and can`t help regarding it then don`t waste both our times.
I`m here to have answers to my problems that I face with E2. If someone can`t help me than I ask the moderators to delete their useless posts that are good for nothing.
What is your "goal" to watch channels or brick the receiver? Since you are a beginner as you say
This is a help forum, not open-learning platform .
If you have problem helping others you can just block them without any reason, as you blocked me.
And I want to create a complete backup of this image, before moving on to another image. If you have any problem with that you can consult help from anyone that you want.
Thanks for nothing.
I really liked this image can I have a link to this image for Amiko Alien 2 receiver
You would have saved yourself a load of hassle if you just did what was suggested to you weeks ago.
Joeuser's Taapat based image with new hardware DES drivers. (powervu...)
I just wanted to perfect Open ATV as I really liked it. But now I saw that even Open PLI looks the same so it was a love at first sight too. I`ll update you about Joeuser`s Taapat based image soon but before installing Open PLI can you just help me one last time with IPTV or Kodi for my receiver on Open ATV. This is the last thing I want to add to my image and to back it up before going to Joe`s image.
Just give me the link to IPTV or Kodi for my receiver.
Thank you so very much.
Your help got me from a beginner to an intermediate user of E2.
Display MoreQuick lesson in Diseqc
diseqc 1.0 means it will work with a 2x1 or 4x1 diseqc switch
diseqc 1.1 means it will work with a 8x1 switch
diseqc 1.2 means it can control a motor
diseqc 1.3 means it has USALS function for a motor
What DiSEqC Do You Need?
1. No DiSEqC is good for single antenna systems that are fixed on one satellite. Every receiver can handle this.2. Tone Burst is used for the simultaneous reception of two satellites with a monoblock LNB. This switching criteria is supported by every digital receiver.
3. DiSEqC 1.0 is for multifeed and/or multi-antenna systems with up to four LNBs/antennas. This expansion of Tone Burst can operate four to eight switches.
4. DiSEqC 1.1 is for multifeed systems with cascading multiswitches. This expansion of DiSEqC 1.0 can switch between up to 56 satellite signals. Control commands are repeated multiple times to guarantee that they reach every switch level. It is usually only used with larger antenna systems.
5. DiSEqC 1.2 drives H-H antenna motors so that all of your favorite satellites can be received. It has some weaknesses with regards to storing satellite positions.
6. DiSEqC 1.3 also drives H-H motors. With the position calculations built into the receiver, it takes full advantage of the DiSEqC 1.2 GoTo X commands. These receivers are labeled with USALS, DiSEqC 1.3 or GoTo X.
Voltage mode is 13V and 18V, tuner switch automatically depence are U receiving V polarisation or H polarisation
Thank You so much Hexman for the quick and wonderful lesson on Diseqc settings in E2.
Can you also throw some light on How to adjust settings for Blind Scan in E2? When I do a blind scan it gives me an error that "No transponders were found for those search parameters."
Try it on 19,2e on Das Erste or ZDF
Not sure on your reciever but press red on Openatv and wait a second or two for it to load
We don`t receive 19.2 in Pakistan. We receive 9e and 13e easily if there are any HbbTV channels in these Sats that work?
if you mean something like that ! this is auto play HbbTV in OpenPLi 4.0
I really liked this image can I have a link to this image for Amiko Alien 2 receiver. In its official website it doesn`t support Amiko Alien 2.
Display MoreYou are exactly at the point i was about a year ago, you have to keep reading
I find its mainly trial and error that works for me (and lots of help from master g, enigma lol)
Remember if you do something wrong just reflash your box - I am actually amazed i haven't bricked an enigma 2 box yet
I am at the point now where I am ready to ditch E2 boxes - they are great but have some limitations
Trying to get biss, powervu etc working is such a fkng polarva - its just far easier with other methods
Just ordered my first TBS tuner so no doubt I will be asking lots of annoying questions soon
Got some reading to do now on ProgDVB and DVBDream
I appreciate your post but you should have answered my questions instead :)
if you mean something like that ! this is auto play HbbTV in OpenPLi 4.0
Which receiver are you using?
As you have blocked me so I can`t see your STB names.
i don't think you get hbbtv on 28.2e. Its for european satellites.
We do not receive 28.2e here.
You need a web browser installed on the receiver for this to work.
When you install hbbtv from the feed it also installs opera.
Check the plugin list to make sure it has installed.
If it isn`t in the plugin list try to intsall it from the feed.
If its not in the feed its not available for your receiver.
I installed OpenOpera HBBTV and when I activate the HbbTV on Duna Channel on 9e nothing shows. In the receiver`s menu it says "WEB BROWSER ACTIVE".
So what is the problem here.
What does Tone Mode, Tone Burst and Voltage Mode mean?
Can you throw some light on these options and their application so that I along with all those who are new to E2 can understand these options well and can use them with ease.
Thank You for your time, understanding, patience and help.
How can I activate HbbTV? I am trying this since I had this image but did not succeed. Is HbbTV not compatible with Open ATV? E2? or 7162 chip?
What is the problem? Because it plays in Spark mode but not in E2.
Can someone who have Star Track 2020 HD+ or Amiko Alien 2 receiver confirm that HbbTV doesn`t work for E2 in this receiver?
c27cfcf6c5e574c4.jpg
How can I activate HbbTV? I am trying this since I had this image but did not succeed. Is HbbTV not compatible with Open ATV? E2? or what is the problem? Because it plays in Spark mode.0ac070c.jpgd113a1af9.jpg
Can someone throw some light on HbbTV issue? I have no idea of HbbTV activation on E2.
Thank You all.
How can I activate HbbTV? I am trying this since I had this image but did not succeed. Is HbbTV not compatible with Open ATV? E2? or what is the problem? Because it plays in Spark mode.0ac070c.jpgd113a1af9.jpg
Since this thread is shifted to Miscellaneous Support so I can ask a few basic questions about E2 which I have since September of last year.
How can I control my TV through HDMI CEC?767451d275.jpg
ok on your service scan the satellite still needs to be set to 10.e though
But I received 93.5`s so many TPs by searching the same way on 95e LNB.
And can you post the screenshots of the 4k channels that you are receiving on your DM900 and which image do you use on your DM900?
Thank You for your time.
It really means a lot to me. :)