Why not use an image that you know works?
This is the problem. I like Open ATV and I would want this method to work with it.
I downloaded the modules_spark.zip but I don`t know where to put it in my image to make it to work???
Maybe it is drivers for sti 7111, have You used this for sti7162 ?
Joeuser told me to download them. I do not think that, that would be the case otherwise he would have told me not to download them.
Only he knows what went wrong and how to correct that. But joeuser is busy nowadays so we have to wait for him to be free to guide us to the right way.
There is no other method for installing the drivers.
Setup stream relay on openatv or use an image joeuser has created with the drivers included.
Yeah, about Stream Relay. I fixed the Dreambox issue by changing FTP type to passive which was by default set to Active and it worked.
I watched the video in this thread How to watch powervu on enigma ii [detail tut] and did exactly what it said.
I also took help from this article by Engineer Khan https://www.scribd.com/doc/299…-Oscam-Emu-Engineerkhan15
And I carefully examined each and everything in the bouquet section and added everything right in the "iptv and other streaming services" but still there is no picture of the channel.
Can you tell me now that what is still wrong?
I can send you the softcam file in private if you doubt it and my softcam keys are taken from W@Rp.
So you have to guide me now to what to do to enable the channels to run and Yes, "Include ECM in http streams" is enabled. What else should I set right or am I missing for the streaming to work?
Thank you for your time and patience with me.
This is what the log says when I open the Atlantic Channel on 9 east:
2017/07/06 11:05:09 1D942ADA c (ecm) linuxsatsupport (0E00@000000/0000/0002/40:FD7F78395260A655BB1868E30B347CF9): found (2 ms) by oscam_emu (L/1/7/7) - Atlantic
2017/07/06 11:05:10 1D942ADA c (dvbapi) ERROR: ioctl(CA_SET_DESCR): Operation not permitted
2017/07/06 11:05:10 1D942ADA c (-) -- Skipped 3 duplicated log lines --
And this is the Screen Shot of the channel.87652f66460ea0e36000a434.jpg
Believe me this is the maximum that I can go. I`ve exhausted every possible option that "I" in my little and limited knowledge had.
Now it is up to the experts and this whole forum to put all your experience, knowledge and expertise together and save the day.
I look forward to all your help because without it I can`t proceed even an inch. So kindly detect the problem here, help me so that this thread can be closed and that I can take a sigh of relief.
If anyone of you need any kind of info about my settings in public or in private let me know.
If my oscam emulator is finding the key as highlighted in red in the log below. Why doesn`t the picture come of the channel?
2017/07/06 11:18:05 1D942ADA c (ecm) linuxsatsupport (0E00@000000/0000/0002/40:D2973E9AD4BA179684422502911B319A): found (11 ms) by oscam_emu (L/1/7/7) - AtlanticP 1F86 00 3581B4C2D46026 ;7W 11595
Hi guys….
In this tutorial am going to explain how to use Powervu with dreambox without stream relay
For those who don’t have dreambox, you will have to activate stream relay to make it work, without stream relay is only for dreamboxes.
I quote highly esteemed Joeuser >>
Quote
PowerVU config
==============
Keys in SoftCam.Key:
P <srvid> <nb> <key>
example:
P 1234 01 11223344556677
For channels with same srvid: (UPDATED!!!)
Channel #1: P 1234 01 11223344556677
Channel #2: P 1234 01 11223344556677
Channel #3: P 1234 01 11223344556677
AU keys:
P <srvid> <UA> <key>
example:
P 1234 11223344 11223344556677
On compatible Dreambox STBs:
1) Disable the Stream Relay (on by default):
Webif -> Config -> Stream Relay -> Mode
0 - disabled
or in oscam.conf:
[streamrelay]
stream_relay_enabled = 0
2) Select the correct DVB-Api extended CW API:
Webif -> Config -> DVB-Api -> API for extended CWs
1 - OE 2.2
2 - OE 2.0
or in oscam.conf:
[dvbapi]
extended_cw_api = 2
On other devices the Stream Relay must be used:
Display More
Display More
P 1F86 01 CB5D29AF09277A ;7W 11595
P 1F86 00178834 5760007a539b45 ;EMM Key
P 1F86 00194247 3d3aada52de025 ;EMM Key
P 1F86 001b41a5 3ba5fb3aba8eae ;EMM Key
P 1F86 001b6590 00220e31f919bc ;EMM Key
P 1F86 001c1b89 d5eea7e0081d86 ;EMM Key
P 1F86 001c61c6 8a8014a4a03f5f ;EMM Key
P 1F86 001d1f60 fceed617ce0e05 ;EMM Key
P 1F86 001d24b5 12fc7c504f6062 ;EMM Key
P 1F86 001d2f8c eb8125e02add8e ;EMM Key
The 1F86 is the SVID of the channel, you can get from your dreambox, from the info menu
fc6097478c7906afd12.jpg
That’s the same as the SID, its already in HEX format because dreambox already converts
it for you
Quote
P 1F86 00 3581B4C2D46026 ;7W 11595
P 1F86 01 CB5D29AF09277A ;7W 11595
Change the 3581B4C2D46026 and CB5D29AF09277A to the working key and 7W to the angle of channel and 11595 to the frequency of the channel
P 1F86 00178834 5760007a539b45 ;EMM Key
P 1F86 00194247 3d3aada52de025 ;EMM Key
P 1F86 001b41a5 3ba5fb3aba8eae ;EMM Key
P 1F86 001b6590 00220e31f919bc ;EMM Key
P 1F86 001c1b89 d5eea7e0081d86 ;EMM Key
P 1F86 001c61c6 8a8014a4a03f5f ;EMM Key
P 1F86 001d1f60 fceed617ce0e05 ;EMM Key
P 1F86 001d24b5 12fc7c504f6062 ;EMM Key
P 1F86 001d2f8c eb8125e02add8e ;EMM Key
The rest are emm key for autoroll to work, all congis will be attached, everything configured out
Most providers are not sending emm key again so you need to be on channel when emm is send to get autoroll working
Others too have blacklisted public posted working emm, especially sports24….so u need to search for valid emm key to get it working
>> As I said before those without dreambox need to enable streamrelay
Quote
On compatible Dreambox STBs:
1) Disable the Stream Relay (on by default):
Webif -> Config -> Stream Relay -> Mode
0 - disabled
or in oscam.conf:
[streamrelay]
stream_relay_enabled = 0
2) Select the correct DVB-Api extended CW API:
Webif -> Config -> DVB-Api -> API for extended CWs
1 - OE 2.2
2 - OE 2.0
or in oscam.conf:
[dvbapi]
extended_cw_api = 2
On other devices the Stream Relay must be used:
Display More
Change to one, or follow this tutorial >> HERE
softcam key details for both satellite >>
P 1F86 00 A350273CA13231 ;7W 11595
P 1F86 01 EC9ADA70206B67 ;7W 11595
P 00194247 00 3d3aada52de025 ;EMM Key
P 001b41a5 00 3ba5fb3aba8eae ;EMM Key
P 001b6590 00 00220e31f919bc ;EMM Key
P 001c1b89 00 d5eea7e0081d86 ;EMM Key
P 001c61c6 00 8a8014a4a03f5f ;EMM Key
P 001d1f60 00 fceed617ce0e05 ;EMM Key
P 001d24b5 00 12fc7c504f6062 ;EMM Key
P 001d2f8c 00 eb8125e02add8e ;EMM Key
P 0065 00 9865B26277F7AB ;20W 4128 Special EventS
P 0065 01 FFFA91E97B2570 ;20W 4128 Special EventS
P 0066 00 9865B26277F7AB ;20W 4128 MSNBC
P 0066 01 FFFA91E97B2570 ;20W 4128 MSNBC
P 0067 00 9865B26277F7AB ;20W 4128 FOX NEWS
P 0067 01 FFFA91E97B2570 ;20W 4128 FOX NEWS
P 0068 00 9865B26277F7AB ;20W 4128 CNBC
P 0068 01 FFFA91E97B2570 ;20W 4128 CNBC
P 0069 00 9865B26277F7AB ;20W 4128 SKY NEWS
P 0069 01 FFFA91E97B2570 ;20W 4128 SKY NEWS
P 006B 00 9865B26277F7AB ;20W 4128 Engage
P 006B 01 FFFA91E97B2570 ;20W 4128 Engage
P 006C 00 9865B26277F7AB ;20W 4128 SKY SPORTS
P 006C 01 FFFA91E97B2570 ;20W 4128 SKY SPORTS
P 006D 00 9865B26277F7AB ;20W 4128 HD Sport 24
P 006D 01 FFFA91E97B2570 ;20W 4128 HD Sport 24
P 006E 00 9865B26277F7AB ;20W 4128 Prime US
P 006E 01 FFFA91E97B2570 ;20W 4128 Prime US
P 006F 00 9865B26277F7AB ;20W 4128 Prime Telly
P 006F 01 FFFA91E97B2570 ;20W 4128 Prime Telly
P 0071 00 9865B26277F7AB ;20W 4128 HD Special Events
P 0071 01 FFFA91E97B2570 ;20W 4128 HD Special Events
P 006A 00 9865B26277F7AB ;20W 4128 BBC NEWS
P 006A 01 FFFA91E97B2570 ;20W 4128 BBC NEWS
Display More
Very important, after changing keys, remember to restart oscam from panel or picture will not show
My oscam-emu and configs FILES1,FILES2 AND FILE3
ABOUT AUTOROLL
- The oscam.conf is setup to autoroll with emm keys in the softcam. Key
you need to look for the valid emm key,BWTV only send the EMM stream for a very short time each day.And until they send while watching the key will not update
Type in browser to assess oscam webif
The ip_of_your_dreambox:16402
for you to know autoroll will work,You should see something like this in oscam live log
(reader) emulator [emu] EMM: reader 0E00 match since emmpid has no provid -> SEND
Relax, this means oscam is ready to receive the EMM for the UA listed in your emm key line in softcam
For those on VU+ should watch this video on how to use stream relay >> WATCH VIDEO
thanks for reading,hope it clears so many doubts
press the thanks bottom if this tut helped you
esuo2
Display More
I did each and everything according to this video and for the same Satellite`s channels (step by step by watching the video) i.e. 105.5 east that the person did in the video but it didn`t work in my Open ATV 6.0 on an sh4 type receiver with 7162 chip.
Everything, the way he put the keys in the softcam and I did everything very meticulously and after so much painstaking effort no channel came.
So does this so called "Stream Relay" method even work or is it a big bad joke?
If it works, can someone post a screenshot of it here.
Because even the person in the video couldn`t play the channel and after restarting the oscam the video finishes because there is nothing as a stream relay. It is a lie and a deception for wasting people`s time and nothing else.