Configs are sent to etc/tubox/config/latest oscam
on other images like openvix its sent to etc/tubox/config
But in Open Blackhole5 which Im trying to setup and use its etc/tubox/config/latest oscam
thats what i was told in the OPen Blackhole forums?
my port under oscam.conf file is 5115 which is what i use to enter webinif
thats based on the files you sent me to download
I checked again,
Display MoreDisplay Morein the oscam.conf file which I downloaded form here part of it says the following:
[dvbapi]enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
user = Receiver
read_sdt = 2
boxtype = dreambox
dose it mean my user name also goes here too in the section user=
and the same for oscam.user below too?
[account]user = Receiver
au = 1
group = 1
Ass fr any password , i cant figure out where that has gone wrong?The log clearly shows there is a problem with the credentials used to connect to that server.
The configuration for this is in oscam.server, nowhere else, it has nothing to do with the user/account in oscam.conf or oscam.user
part of the oscam version log says this:
Unix starttime: 1649628058
Starttime: 10.04.2022 23:00:58
Version: oscam-1.20_svn-r11704
Compiler: arm-oe-linux-gnueabi
Box type: vuuno4kse (generic)
PID: 1663
TempDir: /tmp/.oscam
GBox tmp_dir: not defined using: /tmp/.oscam
ConfigDir: /etc/tuxbox/config/oscam-latest/
WebifPort: 5115
And the the live log errors says this ( crossed out personell info):
2022/04/10 23:23:31 02EB8A5B p (-) -- Skipped 2 duplicated log lines --(cccam) cccam(r) xx.xxxxxxxxx.com: login failed, usr/pwd invalid2022/04/10 23:25:56 42C3C243 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
oscam.server I have this:
[reader]
label=xx.xxxxxxxx.com
enable=1
protocol=cccam
device=xx.xxxxxxx.com,xxxxx
user=xxxxxxxx
password=xxxxxxxxx
cccversion=2.1.2
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccmaxhops=10
ccckeepalive=1
cccwantemu=0
Is the problem to do with user/password, would have thought the conversion app deals with that?
The log states the user/pass is wrong which is why its not connecting to the server.
i Checked on oscam.server file the user name and pass is correct?
in the oscam.conf file which I downloaded form here part of it says the following:
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
user = Receiver
read_sdt = 2
boxtype = dreambox
dose it mean my user name also goes here too in the section user=
and the same for oscam.user below too?
[account]
user = Receiver
au = 1
group = 1
Ass fr any password , i cant figure out where that has gone wrong?
I have no managed to get oscam webinf working by typing ip+port
Below is the live log
Is the problem to do with user/password, would have thought the conversion app deals with that?
These are the results im getting under Open Blackhole5:
I cannot clear channels or connect to oscam webinf using ip and port
I can only connect to oscam webinf juit by ip alone . its not asking for user name or pass.
The provider has given me the necessary files for testing and connecting and for some reason they think my box is not connecting to their server?
These are my log files :
2022/04/06 21:21:15 00000000 s (main) System name = Linux
2022/04/06 21:21:15 00000000 s (main) Host name = vuuno4kse
2022/04/06 21:21:15 00000000 s (main) Release = 4.1.20-1.9
2022/04/06 21:21:15 00000000 s (main) Version = #1 SMP Sun Jan 30 02:02:31 UTC 2022
2022/04/06 21:21:15 00000000 s (main) Machine = armv7l
2022/04/06 21:21:15 00000000 s (main) Stb model = dm8000
2022/04/06 21:21:15 00000000 s (main) Stb vumodel = vuuno4kse
2022/04/06 21:21:15 00000000 s (main) Stb boxtype = vuuno4kse
2022/04/06 21:21:15 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 1703
2022/04/06 21:21:15 00000000 s (main) signal handling initialized
2022/04/06 21:21:15 00000000 s (led) LED support is not active. Can't detect machine type.
2022/04/06 21:21:15 00000000 s (main) waiting for local card init
2022/04/06 21:21:15 00F08898 h (webif) webif: decompressed 172519 bytes back into 418240 bytes
2022/04/06 21:21:15 00F08898 h (webif) HTTP Server running. ip=:: port=83
2022/04/06 21:21:15 00000000 s (main) init for all local cards done
2022/04/06 21:21:15 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2022/04/06 21:21:15 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2022/04/06 21:21:15 00000000 s (gbox) local gbox failed init
2022/04/06 21:21:15 5A1DA0B3 c (client) plain dvbapi-client granted (anonymous, au=off)
2022/04/06 21:21:15 5A1DA0B3 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam-latest/oscam.ccache
2022/04/06 21:21:15 5A1DA0B3 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0 maximum number of filters is 64 (oscam limit is 64)
My oscam.conf file
# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11516
# Read more: http://www.streamboard.tv/svn/…on/doc/txt/oscam.conf.txt
[global]
logfile = /dev/null
clienttimeout = 6000
nice = -1
waitforcards_extra_delay = 60
preferlocalcards = 2
disablecrccws = 1
[cache]
[dvbapi]
enabled = 1
au = 1
pmt_mode = 1
request_mode = 1
delayer = 70
ecminfo_type = 4
user = localuser
read_sdt = 1
write_sdt_prov = 1
boxtype = dreambox
[webif]
httpport = 9999
httpuser = admin
httppwd = admin
httprefresh = 10
httppollrefresh = 10
httpallowed = 192.168.0.0-255.255.255.255
my oscam.dvbapi
P: 098D:000000
P: 1884:000000
My oscam.server ( personnel details crossed out and I used the oscam convertor)
[reader]
label=test.fcnoip.org
enable=1
protocol=cccam
device=test.xxxxx.org,xxxxx
user=xxxxxxx
password=xxxxxxxx
cccversion=2.1.2
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccmaxhops=10
ccckeepalive=1
cccwantemu=0
Problem is that is does not work in Open Blackhole 5 but it dose in OpenVix.
Im trying to figure out problem, Im uisng OSCAM (1.20+SVN11704-r1)
I looked at the log files and says it cant find reader, but its all there?
Hi, Im glad I found this post.
I have a new VU+UNO 4KSE I installed OBH5 and Oscam latest (1.20+svn11704-r1) when inserting my config files nothing opens but get no error mesages.
If I use Openvix Image 6 it works fine.
So am I using the wrong OSCAM file in OBH5 for my reciever as I have a feeling it may have somthing to do with Python3?
Thank you
20220321 to 20220330 ZIP is what I see, I assume that is the latest is the last one on the list?
I would say no, Or rather say that you have done it correct. Better to have one common VPN for all devices
then several in the same Network.
Thanks for the confirmation.I aways wondered why E2 boxes had that option as I was wondering how that worked.
All my devices -Sat box, Tv, Iptv box run through a DDWRT vpn router with IPVanish subscrption
Do I still need to install and configure Open VPN on my enigma2 box?
For Extrend ET8500 and VU+UNO4KSE there are sevral zip files of OpenATV 7.1 for each box, which one do I install and what are the diffrences between all those varoius files?
mate, if you use same Oscam files in 2 different receiver your line provider will block 1 Receiver, because 2 different IP adress.
i think there is maybe your problem.
otherwise than wrote @s3nO, ask your line provider whats matter
Yes I think thats what may have happened because only testing between 2 recievers, one with openvix on Extrend box and other on my new box VU + with Openblack hole which I was testing to see if it works
Display MoreCode2022/03/27 21:46:51 411512AF c (client) plain dvbapi-client granted (anonymous, au=off)
Code2022/03/27 21:47:03 411512AF c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding! 2022/03/27 21:47:07 411512AF c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
Something there is really badly set up.
Contact your provider. He will help you. I have no reason to help you and besides, it's forbidden here. Your softcam server administrator can help you as the best. Maybe the softcam server intentionally denies communication for an unknown reason.
You may also need to set the CAID (you do not have it listed there in your configuration).
It's hard to say where the mistake is.
In the LOG waht you sent, I do not see any connection to the external readers (with cccam protocol) that you have set in "oscam.server". Unfortunately, the internal readers are not configured at all. Since your Oscam did not find either internal readers or external readers (cccam protocol), so, it cannot decode anything.
Thanks, I will have to do some reasearch, these were only 24hrs free test files from provider to see if can get it to work on my new VU+ Which I find tends to struggle compared to my old box.
I can get into oscam webinif This is the live log file, but not sure what im looking for in that log?
I can get into oscam webinif I can see under seetings the soft cam fles both cccam and oscam ticked, I can select what Im watching or trying ot watch although the channel dose not clear - currnet status.
I put all my oscam config files under etc/tubox/config but oscam web inf wont show me any file paths or directory
apart form that it tells me the basic info about my box
IM using the same softcams on both recivers downloaded via feeds
in OPenVix both - CCCAM (2.3.8-r1-de) and OSCAM Latest (1.20 +svn11704-r1) work and clear the channels
In open Blackhole -CCCAM (2.3.8-r1-de) works on some channels only and OSCAM Latest (1.20 +svn11704-r1) dose not clear channels
I presume the other files are ok if they all work in open vix
so the problem is the OPen Blackhole ?
I went into web inf- what am I looking for in that?
Thanks,
I have sorted the tunner config out.
I selected the one input (input Tunner A that is connected to the motor and set that normally as positioner) and left the rest as automatic I untill get a second cabel fitted.
I used 3 cccam files and converted them to oscam.server files using software app (not online conversion)
This works in openvix but not working in Open Blackhole 5, i get no error messages its just the channel dose not clear like it did under vix.
Im using oscam stable version.
This is the oscam.server files below with all confidential parts replaced by xxx
[reader]
label=xxx.xxxxx.xx
enable=1
protocol=cccam
device=xxxx.xxxxxx.xxxx
user=xxxxx
password=xxxxxx.xx
cccversion=2.1.2
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccmaxhops=10
ccckeepalive=1
cccwantemu=0
[reader]
label=xx.xxxxxx.xxx
enable=1
protocol=cccam
device=xx.xxxxxxx.xxx,xxxx
user=72738587
password=xxxxxxx
cccversion=2.1.2
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccmaxhops=10
ccckeepalive=1
[reader]
label=xxxxx.xxxxxxx.xxx
enable=1
protocol=cccam
device=xxxx2.xxxxxxxx.xxx,xxxxx
user=c1thm
password=cccameagle
cccversion=2.1.2
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccmaxhops=10
ccckeepalive=1
Hello My box is a new VU+Uno 4k se only got it yesterday
