Posts by Lululla

read some replies carefully before yours..

check on the plugin (last attachment) that the servers are vavoo.to , serviceapp set it to default. not on exteplayer

the log you posted is useless.. you need the whole log while you use the plugin.. and it is much longer than yours :)

ok now

fix exit on save :)

try yourself

-add link to main menu and other suggestion

Quote from Panda555

I want to note that this is not a plugin problem, but a stream problem in my case. The plugin is successfully installed, but there is no stream on any host. Open the media player and return to the channel list. Everything was working 5-6 days ago and backwards. Same channel tested on PC and android phone and works. Is it up to Mediaplayer? Image is oatv 7.3, DM800SE. Maybe it's time to update to 7.4. I didn't have this image before, so tell me how to update to the new version.

Whether with Software update, Flash online or telnet. Is a backup required? Thank you.

o yes my friend,

I think it's time to move on to the next level, ATV 7.4 Dev,

Flasha completely, clean without backup settings

Every now and then a clean is needed. Download the latest atv 7.4 image and then we give the command for the devel, install the feeds.. If you want you can put my TVADDON panel, you can find a lot of useful stuff there too.

You'll have to remove some system plugins like I do. Or follow the topic of KiddaC setup Gude Atv .. very good

Quote from ottobufonto

Hi Lululla,

tried the last zip file. thanks for trying to change the config save.

can you fix the red button (it says back), but doesn't work for me.

Could anyone using oatv chime in whether you can leave the config screen using red button? Or is it just me?

But even with the yes/no I don't think your plugin will be friends with my oatv 7.4.

hitting yes to reboot - crashes (see crash log attached) 20240620-163328-enigma2-crash.log

hitting no - still fatal signal.

now it says "munmap_chunk(): invalid pointer"

Code

16:34:00.1574 [ActionMap] DEBUG: Creating legacy navigation action map.
16:34:00.1577 <bound method MessageBox.pageUp of <class 'Screens.MessageBox.MessageBox'>(Settings saved successfully !
you need to restart the GUI
to apply the new configuration!
Do you want to Restart the GUI now?)>16:34:00.1580 
16:34:00.1582 <bound method MessageBox.pageDown of <class 'Screens.MessageBox.MessageBox'>(Settings saved successfully !
you need to restart the GUI
to apply the new configuration!
Do you want to Restart the GUI now?)>16:34:00.1584 
16:34:00.1664 [Skin] Processing screen 'MessageBox' position=(360,240), size=(1200,600) for module 'MessageBox'.
16:34:00.1862 [Skin] Warning: Attribute 'textPadding' has been deprecated, use 'padding' instead!
16:34:00.2144 [Skin] Processing screen 'MessageBoxSummary', from list 'MessageBoxSummary, MessageBox_summary, ScreenSummary', position=(0,0), size=(132,64) for module 'MessageBoxSummary'.
16:34:01.1462 [eRCDeviceInputDev] 1 6c 1
16:34:01.1468 [InfoBarGenerics] Key 'KEY_DOWN' (108) Make.
16:34:01.1473 [ActionMap] Map screen 'MessageBox' context 'NavigationActions' -> Action 'down'.
16:34:01.3093 [eRCDeviceInputDev] 0 6c 1
16:34:01.3098 [InfoBarGenerics] Key 'KEY_DOWN' (108) Break.
16:34:03.7765 [eRCDeviceInputDev] 1 160 1
16:34:03.7771 [InfoBarGenerics] Key 'KEY_OK' (352) Make.
16:34:03.7775 [ActionMap] Map screen 'N/A' context 'HelpActions' -> Unknown action 'select'!  (Typo in map?)
16:34:03.7778 [ActionMap] Map screen 'MessageBox' context 'MsgBoxActions' -> Action 'select'.
16:34:03.9989 [eRCDeviceInputDev] 0 160 1
16:34:03.9999 [InfoBarGenerics] Key 'KEY_OK' (352) Break.
munmap_chunk(): invalid pointer
16:34:04.1920 PC: 75893024
16:34:04.1922     00000000 30008b00 00000000 737c13c0
16:34:04.1922     0000032f 00000332 00000006 00000000
16:34:04.1922     00000000 cedd7900 cedd7900 00100073
16:34:04.1923     cedd7910 00000000 00000000 00001072
16:34:04.1923     00000332 759b0000 759b0000 00000006
16:34:04.1924     00000002 00000073 758ab710 737c09c8
16:34:04.1924     ffdddddd 758d1c30 00000000 00000000
16:34:04.1924     759b8e40 737c0878 00000000 75893010
16:34:04.1948 Backtrace:
16:34:04.1956 /usr/bin/enigma2(_Z17handleFatalSignaliP9siginfo_tPv) [0x477248]
16:34:04.1961 /lib/libc.so.6(n/a) [0x75893024]
16:34:04.1964 /lib/libc.so.6(gsignal) [0x7584B06C]
16:34:04.1967 /lib/libc.so.6(abort) [0x758358E8]
16:34:04.1968 -------FATAL SIGNAL
16:34:04.1969 PC: 75f30078
16:34:04.1970     00000000 00000001 00000000 737c18c0
16:34:04.1970     ffff8004 008d4ce0 00000000 00000001
16:34:04.1971     00000000 00000000 00000000 2d2d2038
16:34:04.1971     2d2d2d2d cbfb7bec 00000001 00780000
16:34:04.1972     00000001 00000000 737c00f8 007a0000
16:34:04.1972     00655f5c 00000073 758ab710 737c09c8
16:34:04.1972     0077c238 758a5380 00000001 00000000
16:34:04.1973     762d41e0 737c0018 00000000 75f30070
16:34:04.1998 Backtrace:
16:34:04.2005 /usr/bin/enigma2(_Z17handleFatalSignaliP9siginfo_tPv) [0x477248]
16:34:04.2009 /usr/lib/libpython3.12.so.1.0(n/a) [0x75F30078]
16:34:04.2010 -------FATAL SIGNAL

Display More

Display More

I have no idea about this crash, it shouldn't. We look forward to hearing more

Quote from pianos5

Quote from Warder

Quote from pianos5

openAtv 7.4.1? Is version 7.4 another version?

Version 7.4.1 is currently the latest, "development" version. Some time ago it was known as version 7.5-devel

openAtv 7.4 devel Images - OpenATV - Linux Satellite Support Community (linuxsat-support.com)

can it be downloaded?

openAtv 7.4 devel Images - OpenATV - Linux Satellite Support Community (linuxsat-support.com)

Quote from belfagor

I realized that to open the channels from me you have to wait a few minutes, then everything works I think it's a question of dominoes, zgemma h5 with openatv 7.3, I start the plugin all dark I wait a few minutes and I have light

I didn't know this, I didn't test.

Please note that the system has changed.

Now the last key are taken when the player is started!

The key updates every 10 minutes, and to get the new key you should go up and down in the TV player or plugin (one channel back or forward and back)

I don't know if there is a system to update the key while watching, inserting a timer would be like stopping the film and restarting it. I don't think it's good at all. KiddaC

thank's all my friend.. thank's all

2 users have reported to me that the conversion occurs on their boxes but the list is empty

To understand better I would like to know

- which box and image and if possible the debug, since I can't try in their place.

Quote from mj_84

Amiko viper 4k v30- OPEN ATV 7.3- Does not work

What details? what's not working.. without details I don't answer

Sorry.. the written a thousand times.. Read the topic..

Quote from biko

Thanks Lululla

when send channels to fav. on egami 10.5.R7 it empty !

i try the Command for black screen script too

it not work, no channels are played, Just black screen

i try to change player as Gst, Ext-3 No change

any advise !!!

Display More

in this case .. pm me

I need the exported file, a debug from telnet, just to know if there is an error. There should be a file in /tmp/vavoo.log ;)

v.1.12 at top of topic.. thank's

Quote from giopet

Please Lululla,can you give a look at the Ipk?Install the Plugin is ok,but deinstall it, it's not ok,the vovoo folder remains,after restart or Gui restart the same.

ok.. i revrite script

As I said, the keys might not be the right one, maybe leaving the channel list and re-entering (in the plugin) worked for me.

We are looking for a way to update the keys automatically every 5/8 minutes. If we succeed. I would need a little help, but until I solve it, you have to understand that there is nothing difficult, anything can be done. Just a little patience

Quote from Schpountz

Youpiiiiiiiii...

Now it work.

Not all channels but a lot of them... In Germain and French lists

please: for all your users friend

box image annd setting for who woks..

if not install package use this..

as no package but only script for last update too..

Quote from pianos5

poipio12:what the hell are you laughing at

for epg..

There is still a long way to go.

I think it can be solved with EChannelizer. But I'm looking into it. There is no time.

Quote from hamidts

open bh 5.4

vavoo 1.10 installed succes

but don't load the choosen contry.

message . load tha ERROR

i will keep trying thanks

I'm curious, I'd like to delve into it with 1.11 and debugging from telnet.

Thank you

Quote from wawa16

What are the correct settings to run the plugin?
When selecting the channel there is no picture

test on dreamos 2.5 images and Opensource Images

Your answer is here

Post

RE: [Plugin] Vavoo Stream Live.

Maybe it's not a clear concept, before leaving this topic forever there are some rules that should be respected.
It's not all a given.
-the key it takes on the server: it is not certain that it is still active or is correct. In this case, you should close and reopen the plugin.
-we have seen that the plugin works, but it always works and it is not certain that it will work with the configuration that I have on my receiver and that I have made available.
You don't need to do a thousand tests.

In…

Lululla

Jun 16th 2024

Quote from belfagor

Code

I have a black screen, I had version 1.5 after returning from holidays, I installed version 1.11, I have a black screen with openatv 7.3

I don't remember what box you have, but the ATV7.3 is EOL

Maybe update the image so you do your receiver a favor too :) and keep it updated.

On other forums, I read that sometimes you have to do a complete reboot, as well as save the appropriate settings in the config menu.