Thanks for trying but those instructions didnt work.
Posts by Chris230291
-
-
Here is what I found.
Given up with Windows. It doesnt work at all.
In Linux I am having a little success though...
Code
Display Morechris@awesom-o:~$ sudo ./srp_tools_x86 -d /dev/ttyUSB1 smartreader+ version v1.1 MODE autoswitch FREQ 3.69 Mhz KERNEL normal T_MODE t = 0 EGT 0 chris@awesom-o:~$ sudo ./srp_update_x86 -h Smartreader+ update tool v1.3 usage: <options> options: -d <comport> (default comport = "/dev/ttyUSB0") -b activate bootloader -f flash device (must be in bootmode) chris@awesom-o:~$ sudo ./srp_update_x86 -d /dev/ttyUSB1 smartreader+ version v1.1 chris@awesom-o:~$ sudo ./srp_update_x86 -d /dev/ttyUSB1 -f smartreader+ update error chris@awesom-o:~$ sudo ./srp_update_x86 -d /dev/ttyUSB1 -b smartreader+ version v1.1 error activation bootmode chris@awesom-o:~$ sudo ./srp_update_x86 -d /dev/ttyUSB1 -b -f smartreader+ update errorI think this is early/original firmware (1.1).
From what I read only 1.3+ supports Windows updating, so I must use Linux.
Any Idea why I cant flash it?
-
Thanks I will try tomorrow.
-
I was unable to get any of the updaters to work in Windows.
The drivers installed.
The reader was detected as a USB serial connector.
But the software couldnt detect the device.
-
Is newer better?
Do I go straight to 1.5?
-
NCam filled in those values for me from the automatic setting.
Code
Display More2023/10/05 17:09:44 240D6181 h (webif) Reader sky_uk restarted by WebIF from 192.168.1.146 2023/10/05 17:09:45 340EC95A r (reader) sky_uk [videoguard2] creating thread for device /dev/ttyUSB0 2023/10/05 17:09:45 6A14CD2E r (reader) sky_uk [videoguard2] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz= AUTO, cardmhz=369) 2023/10/05 17:09:46 6A14CD2E r (reader) sky_uk [videoguard2] card detected 2023/10/05 17:09:50 6A14CD2E r (reader) sky_uk [smargo] ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02 2023/10/05 17:09:52 6A14CD2E r (reader) sky_uk [smargo] Card type: SYAV 2023/10/05 17:09:52 6A14CD2E r (reader) sky_uk [smargo] Rom version: 40LF 2023/10/05 17:09:52 6A14CD2E r (reader) sky_uk [smargo] Credit available on card: 35 euro 2023/10/05 17:09:53 6A14CD2E r (reader) sky_uk [smargo] FuseByte: 05 2023/10/05 17:09:53 6A14CD2E r (reader) sky_uk [smargo] Region Code: N15 2023/10/05 17:09:53 6A14CD2E r (reader) sky_uk [smargo] Country Code: GBR 2023/10/05 17:09:53 6A14CD2E r (reader) sky_uk [smargo] Pincode read: 9342 2023/10/05 17:09:53 6A14CD2E r (reader) sky_uk [smargo] PCB settings: 3F 0 E 0 2023/10/05 17:09:53 6A14CD2E r (reader) sky_uk [smargo] type: VideoGuard BSkyB (0963), caid: 0963 2023/10/05 17:09:53 6A14CD2E r (reader) sky_uk [smargo] serial: ########, BoxID: ########, baseyear: 2009 2023/10/05 17:09:53 6A14CD2E r (reader) sky_uk [smargo] ready for requests 2023/10/05 17:09:53 6A14CD2E r (reader) sky_uk [smargo] found card system videoguard2 2023/10/05 17:09:53 6A14CD2E r (reader) sky_uk [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1 2023/10/05 17:09:53 6A14CD2E r (reader) sky_uk [videoguard2] card detected 2023/10/05 17:09:53 6A14CD2E r (reader) sky_uk [videoguard2] type: VideoGuard BSkyB (0963) 2023/10/05 17:09:54 6A14CD2E r (reader) sky_uk [videoguard2] ------------------------------------------------------------------ 2023/10/05 17:09:54 6A14CD2E r (reader) sky_uk [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----| 2023/10/05 17:09:54 6A14CD2E r (reader) sky_uk [videoguard2] +---------+----------+---------------------+---------------------+ 2023/10/05 17:09:54 6A14CD2E r (reader) sky_uk [videoguard2] |-- 00 ---|-- 0003 --| 2025/12/20-00:00:00 | 2023/10/05 17:09:54 6A14CD2E r (reader) sky_uk [videoguard2] |-- 00 ---|-- 000b --| 2025/12/20-00:00:00 | 2023/10/05 17:09:54 6A14CD2E r (reader) sky_uk [videoguard2] |-- 00 ---|-- 0010 --| 2025/12/20-00:00:00 | 2023/10/05 17:09:54 6A14CD2E r (reader) sky_uk [videoguard2] |-- 00 ---|-- 001d --| 2025/12/20-00:00:00 | 2023/10/05 17:09:54 6A14CD2E r (reader) sky_uk [videoguard2] |-- 30 ---|-- 30e3 --| 2025/12/28-00:00:00 | 2023/10/05 17:09:54 6A14CD2E r (reader) sky_uk [videoguard2] |-- 30 ---|-- 30e4 --| 2025/12/28-00:00:00 | 2023/10/05 17:09:54 6A14CD2E r (reader) sky_uk [videoguard2] |-- 30 ---|-- 30e5 --| 2025/12/28-00:00:00 | 2023/10/05 17:09:54 6A14CD2E r (reader) sky_uk [videoguard2] |-- b7 ---|-- b765 --| 2025/12/28-00:00:00 | 2023/10/05 17:09:54 6A14CD2E r (reader) sky_uk [videoguard2] |-- b7 ---|-- b766 --| 2025/12/28-00:00:00 | 2023/10/05 17:09:54 6A14CD2E r (reader) sky_uk [videoguard2] |-- b7 ---|-- b772 --| 2025/12/28-00:00:00 | 2023/10/05 17:09:54 6A14CD2E r (reader) sky_uk [videoguard2] |-- b7 ---|-- b773 --| 2025/12/28-00:00:00 | 2023/10/05 17:09:54 6A14CD2E r (reader) sky_uk [videoguard2] |-- b8 ---|-- b846 --| 2025/12/20-00:00:00 | 2023/10/05 17:09:54 6A14CD2E r (reader) sky_uk [videoguard2] |-- b8 ---|-- b860 --| 2025/12/20-00:00:00 | 2023/10/05 17:09:54 6A14CD2E r (reader) sky_uk [videoguard2] |-- b8 ---|-- b8d2 --| 2025/12/20-00:00:00 | 2023/10/05 17:09:54 6A14CD2E r (reader) sky_uk [videoguard2] |-- b9 ---|-- b968 --| 2025/12/28-00:00:00 | 2023/10/05 17:09:54 6A14CD2E r (reader) sky_uk [videoguard2] |-- b9 ---|-- b999 --| 2025/12/28-00:00:00 | 2023/10/05 17:09:54 6A14CD2E r (reader) sky_uk [videoguard2] |-- b9 ---|-- b9a3 --| 2025/12/28-00:00:00 | 2023/10/05 17:09:54 6A14CD2E r (reader) sky_uk [videoguard2] |-- b9 ---|-- b9d5 --| 2025/12/28-00:00:00 | 2023/10/05 17:09:54 6A14CD2E r (reader) sky_uk [videoguard2] |-- b9 ---|-- b9dd --| 2025/12/28-00:00:00 | 2023/10/05 17:09:54 6A14CD2E r (reader) sky_uk [videoguard2] |-- b9 ---|-- b9ee --| 2025/12/28-00:00:00 | 2023/10/05 17:10:05 6A14CD2E r (reader) sky_uk [videoguard2] ------------------------------------------------------from-ins76--I bought the smargo used off ebay.
So I guess I need to chnage the firmware on the smargo?
Are these the files I need?
EDIT:
I didnt read what you said properly.
I'll try with auto disabled and the other values at the default 357
-
I have the options all set to ncams defaults.
Any idea what the values should be?
If you know I can look into how to change them on the smargo.
Perhaps this is why my ecm times are higher than I expected?
Code2023/10/04 17:44:15 26371627 c (ecm) dvbapi (0963@000000/FFFF/17CB/B5:19D89806B8F955DEED46E7FF17975CE5:0F06000000000000:): found (235 ms) by sky_uk (L/1/16/16) - SkySp Mix (lg) 2023/10/04 17:44:17 26371627 c (ecm) dvbapi (0963@000000/FFFF/17CB/B5:09DC27F5963F1B2D26933D1A6C972CD0:0F06000000000000:): found (235 ms) by sky_uk (L/1/16/16) - SkySp Mix (lg) 2023/10/04 17:44:25 26371627 c (ecm) dvbapi (0963@000000/FFFF/17CB/B5:E14AF65E9ED5C58CEC8A0D0C5AC18DB2:0F06000000000000:): found (234 ms) by sky_uk (L/1/16/16) - SkySp Mix (lg) -
Occasionally I get the following error in my Ncam logs
Code2023/10/04 00:50:01 689CFE8F r (reader) sky_uk [videoguard2] Warning: needed try nr 2, next ECM has some delay 2023/10/04 00:50:01 689CFE8F r (reader) sky_uk [videoguard2] classD3 ins54: (-1) status not ok 6d 90 2023/10/04 00:50:01 689CFE8F r (reader) sky_uk [videoguard2] The card is not answering correctly! Restarting reader for safetyAny idea what might cause this?
Code
Display More[reader] label = sky_uk protocol = smargo device = /dev/ttyUSB0 fallback = 0 caid = 0963 readtiers = 2 detect = cd mhz = 534 cardmhz = 369 group = 2 emmcache = 1,3,2,0 blockemm-unknown = 1 blockemm-u = 1 blockemm-s = 1 blockemm-g = 1 audisabled = 1 -
If the keys are correct then it should work.
I use NCam but it should configure the same.
TVH:
ncam.conf/oscam.conf dvbapi:
Code
Display More... [dvbapi] enabled = 1 au = 1 pmt_mode = 4 request_mode = 1 listen_port = 9001 delayer = 60 user = dvbapi read_sdt = 2 write_sdt_prov = 1 extended_cw_api = 1 boxtype = pc ... -
Did you add keys?
In the web UI go to files > other files > softcam.key and put keys here.
-
OK thanks.
A lot of key files are really outdated.
Some still have keys for channels that dont even exist anymore.
-
Which french bouquets are opening with keys?
-
Why cant people submit pull requests to the official oscam repo instead of making "private" builds?
-
I don't use enigma2.
I am assuming the bouquets use "localhost"?
Edit: Yes they seem to use 127.0.0.1 which is the same as localhost
Ciefp settings:
Code#SERVICE 1:0:19:81:6:85:21:0:0:0:http%3a//127.0.0.1%3a17999/1%3a0%3a19%3a81%3a6%3a85%3aC00000%3a0%3a0%3a0%3a:Sky Sport Top Event HDSo its pointing to itself instead of the primary box.
That's assuming this "client mode" isn't some special mode that handles all that.
-
Just guessing.
You need to switch the IP in the bouquets on the second box to match the IP of the primary box.
-
Maybe its one of those special cards off ebay. I seen a few recently.
-
You can try to install dvbtee over ssh using the instructions posted on the GitHub.
Or you can use an external device if you know of a way to stream from e2 to external devices.
dvbtee also accepts files so you can use recordings too.
-
Converting the json to xmltv is easy. I do it in this project: https://github.com/Chris230291…aaa815ad4fc8a359764a9d678
-
Stalker uses a json formatted epg file.
There's typically a global file and/or a separate file for each channel.
Sounds like whichever plugin/s there are for e2 aren't using them.
-
If the full stream, or at least all of the audio, video and encryption stuff is included for stream relay to work, are you sure the rest of the data is removed?
Try running dvbtee like I was, but use one of the links you guys have in your special bouquets for iCAM.
Codecurl <iCAM stream relay url> | dvbtee/dvbtee -e -t10 -jAlso, if you can enable a sat>IP server in e2, then it should be everything. I don't see how a client could work properly if it stripped everything out.
I wonder why you would need to patch drivers for iCAM on e2?
On PC we just patch libraries (libdvbcsa ) and software to support the non dvb standard.
No drivers are touched.
Doesn't e2 use the same libraries, or an equivalent?
