when i try to open plugin 6280aa65985340d3284d.jpg
Posts by Dreamboxv2
-
-
Взаимодействие с другими людьми
Not working with the commands trough putty ssh, error 5 i cannot flash it again ... i think the internal flash has died or something dammit...
follow the link register on the Domica forum, if you don't know Russian well, use an online translator ...here everything is described in detail how to restore dreambox900-920, good luck!!!
if you can't find a solution there either then look for information - Through the service port, you can restore using the TFTP server running on the computer.
hi dear friend will TFTP help me i have this error in my dm900
CPU 01
Dreambox DM900
AVS init...
AVS init OK
AVS load:select_image: addr_offset: 00051000 part_offset: 00000000 bootStatus: 2 a002b00
AVS load_code offset =00051000
LOADED
AVS: overtemp mon ON
single board
select_image: addr_offset: 00055000 part_offset: 00000000 bootStatus: 3d2b2500
MEMSYS-STD
SHMOO 02010000 BLD:11138M HW:hpf0_b1p6 V:2.1.0.0
MCB: FLEX
AVS start:status=000000ff
STB: Current voltage=0000038c(908)
temperature=0000b2c4(45764)
PV=0000034e(846)
MV=0000038d(909)
AVS FW rev=30333278 [0.3.2.x]
OK
DDR0: !@ ffe0e780 <= ffe0df10 MEMSYS-0 @ f1100000 OK
DDR1: =@ ffe0e780 <= ffe0df10 MEMSYS-1 @ f1180000
MEMSYS ERROR: 00000001
eMEMC:
00000000
ePHY: 00000000
eSHMOO: 10000000 00000082 00000000
CPU 01
Dreambox DM900
AVS init...
AVS init OK
AVS load:select_image: addr_offset: 00051000 part_offset: 00000000 bootStatus: 2 a2f2b00
AVS load_code offset =00051000
LOADED
AVS: overtemp mon ON
single board
MEMSYS:0000002f
FATAL ERROR: Boot 2nd image failed -
hi to all i yesterday flashed dreamos image in my dm900 image works good but only issue i faced is i dont find satellite lists in channel selection
green button blank
-
Good to all
Could someone help me please.
I have an original Dreambox 900 with the Dream-Elite 6.0 image and up-to-date updates.
It has a 120Gb Ssd, which it recognizes very well.
I would like to install another image, in addition to the one I already have installed.
Installing Barry Allen 12.80, it installs perfectly on a 32Gb SDCar, installs on Sdcar and has it restarted.
So far so good, it is installed and appears in the Plugins menu. The problem arises when I restart the Dreambox, Barry Allen disappears from the plugins
I've tried to install it again and always do the same thing, install it and after restarting the second time it disappears.
What am I doing wrong or because Barry Allen disappears.
Thank you
Format sd card and install again it will work
-
Bro what is mean SIM 2.30??
Clone sim
-
Good nicely working in barreyallen but somethings creates problem
Like blindscan crashes not working
-
Yeah that's the earlier si2169
Mines the Si2169D, literally just one revision newer than yours and these images don't seem to have working drivers for it, which stops the image booting.
Are you facing empty tuner problem after install this image
-
tuners not work after install
Replace lib/modules with clone one
-
Hello friends and admins, please Please Please let me know a problem. I have a 7020HD DreamBox and I use the latest OpenATV image version, and I use the emulator ncam 5.5 and Oscam emu 11424 but none of the PowerWu channels are open. This has just happened after the image update. Please Please Please Please help. Thank you.
Every img works good u need to check Ur configuration
-
efa23b537c4.jpgYes all Sony network ok but 57e still black screen
kindly share this SKIN bro
Looks like HD Glass 16 skin
HD Glass 17 not 16
-
efa23b537c4.jpgYes all Sony network ok but 57e still black screen
-
Now 105.5 68.5 91.5 ok but 57 e Still Black screen
-
is this for original DM 900??
No for japhar sim
-
Hi I need oscam binary for dm900 4k to run my Dishtv card I have valid RSA key please if any have
-
Flash again but this time from the openatv 6.0 sim 230 local update , booting without problems but just 1 tuner is showing up
U mean tuner empty
If this problem than just replace lib/modules folder everything will b ok
-
Working good but not connected to DCC login failed
-
Hello everyone , I just waiting for my DM900 SIM230 Clone and the seller send me the image That I must only install wich is from openatv
SIM230_openatv-6.0-dm900-Levi45-oscam-Kodi-Powervu-backup .tar . is look like the image is ready for make is magic on powervu, anybody know if autoroll working with this clone ?
U can install any image of dm900 original just need to replace lib modules
-
Hi,
Just purchase DM900HD clone Sim 2.30. I would like to confirm the original image as mention above
Dream-Elite-Developer-6.0-dm900-20170628.rootfs.tar Where can i download the file?
-
I am Using oscam file from Candido
and I am Using 2 EMU - Oscam 11401/Ncam 4.3
oscam - extended_cw_api = 1
Ncam - extended_cw_api = 2
68.5E - 166E All Channel open by Oscam/Ncam Twins
Goodday !!!
Not Same Time .. Select 1/2
Please tell in detail are u using OpenAtv softcam panel which gives two option
Mo
-
I am Using oscam file from Candido
and I am Using 2 EMU - Oscam 11401/Ncam 4.3
oscam - extended_cw_api = 1
Ncam - extended_cw_api = 2
68.5E - 166E All Channel open by Oscam/Ncam Twins
Goodday !!!
How to use 2 emu same time