Posts by cengizkartal

Unix starttime: 1670541792
Starttime:      09.12.2022 02:23:12
Version:        ncam-6.6
Revision:       r1
Build:          07-12-2022
Compiler:       x86_64-pc-cygwin-libusb-pcsc
Box type:       generic (generic)
PID:            1779
TempDir:        /cygdrive/c/Users/SSK_3/AppData/Local/Temp/_ncam
ConfigDir:      \NCam\etc\tuxbox\config/
WebifPort:      8181


Web interface support:                   yes
LiveLog support:                         yes
jQuery support intern:                   yes
Touch interface support:                 no
SSL support:                             no
DVB API support:                         yes
DVB API with AZBOX support:              no
DVB API with MCA support:                no
DVB API with COOLAPI support:            no
DVB API with COOLAPI2 support:           no
DVB API with STAPI support:              no
DVB API with STAPI5 support:             no
DVB API with GXAPI support:              no
DVB API with NEUTRINO support:           no
DVB API read-sdt charsets:               yes
DVB API with ICAM streamrelay support:   yes
Irdeto guessing:                         yes
Anti-cascading support:                  yes
Debug mode:                              no
Monitor:                                 no
Loadbalancing support:                   yes
Cache exchange support:                  yes
CW Cycle Check support:                  yes
LCD support:                             no
LED support:                             no
Emulator support:                        yes
Clockfix with realtime clock:            yes
IPv6 support:                            no
Cardlist support:                        yes
Emulator support:                        yes
Built-in SoftCam.Key:                    yes


camd 3.3x:                               no
camd 3.5 UDP:                            yes
camd 3.5 TCP:                            yes
newcamd:                                 yes
kscamd:                                  yes
CCcam:                                   yes
CCcam share:                             yes
gbox:                                    no
radegast:                                yes
scam:                                    yes
serial:                                  yes
constant CW:                             yes
Pandora:                                 no
ghttp:                                   no


Reader support:                          yes


Nagra:                                   yes
Nagra Merlin:                            yes
Irdeto:                                  yes
Conax:                                   yes
Cryptoworks:                             yes
Seca:                                    yes
Viaccess:                                yes
NDS Videoguard:                          yes
DRE Crypt:                               yes
TONGFANG:                                yes
StreamGuard:                             yes
Jet:                                     yes
Bulcrypt:                                yes
Griffin:                                 yes
DGCrypt:                                 yes


cardreader_phoenix:                      yes
cardreader_drecas:                       yes
cardreader_internal_azbox:               no
cardreader_internal_coolapi:             no
cardreader_internal_coolapi2:            no
cardreader_internal_sci:                 yes
cardreader_sc8in1:                       yes
cardreader_mp35:                         yes
cardreader_smargo:                       yes
cardreader_pcsc:                         yes
cardreader_smartreader:                  yes
cardreader_db2com:                       yes
cardreader_stapi:                        no
cardreader_stapi5:                       no
cardreader_gxapi:                        no
cardreader_stinger:                      yes

######################################################################### OFFICIAL version NCam cardserver v6.6-r1, ( MIPS, PPC, X86, X86_64, SH4, ARM, EXE ) Copyright (C) 2012 - 2022 developed by Javier Sayago (Javilonas). Visit https://www.lonasdigital.com/ for more details. Source Code: https://github.com/javilonas/NCam Mirror Source Code: https://github.com/ncam-project/NCam

Compiled:

ncam.mips                               Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-openpli_40                    Enigma2 - Mipsel (Openpli 4.0 'Gigablue, Dream, Vu+, Xtrend, Formuler'...).
ncam.mips-uclibc                        Enigma2/Others - Mipsel (Tiviar Plus 'firmware no enigma2', and similar).
ncam.x86                                Linux PC (32 bit - i686).
ncam.x86_64                             Linux PC (64 bit).
ncam.x86_64-syn_atom                    Linux x86_64 (For Synology ATOM 64 bit).
ncam.ppc                                Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old                            Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4                                Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon                Enigma2/Others - ARM (Cortex-A9 - Wetek, Vu+4K, Octagon 4k and similar).
ncam.cortexa15hf-vfp-neon               Enigma2/Others - ARM (Cortex-A15 - Gigablue UHD, Vu+4K, Octagon 4k and similar).
ncam.vuplus4k_arm                       Enigma2 - ARM (Vu+ Zero|Uno|Duo|Solo|Ultimo 4K and similar).
ncam.james_donkey_arm                   Enigma2 - ARM (James Donkey DUO and similar).
ncam.arm-aarch64-dreambox               Enigma2 - ARM (Dreambox ONE|TWO).
ncam.arm-dreambox                       Enigma2 - ARM (Dreambox DM9x0 UHD).
ncam.arm-raspbian                       ARM (Raspberry pi 3, Prismcube, TInkerboard and other similar).
ncam.arm-android                        ARM (For Android ARM (API 24+)).
ncam.arm-marvell                        ARM (Synology Armada 375 and similar).
ncam.arm-armada37xx                     ARM (Synology Armada 37xx and aarch64 similar).
ncam.arm-armada38x                      ARM (Armada 38x and similar).
ncam.arm-mca                            ARM (For Matrix CAM Air).
ncam.arm-samsungtv                      ARM (For Samsung TV).
ncam-router.mips                        Mips (Routers MIPSEL DD-WRT).
ncam.router-openwrt-brcm47xx.mips       Mips (Routers openwrt brcm47xx).
ncam.router-openwrt-ar71xx.mips         Mips (Routers openwrt ar71xx).
ncam.router-openwrt-brcm63xx.mips       Mips (Routers openwrt brcm63xx).
ncam.router-openwrt-huawei-hg556a.mips  Mips (Routers openwrt Huawei HQ556a).
ncam-x86_64-pc.exe                      Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).
ncam-i686-pc.exe                        Windows PC (32-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).

***********************************************************************************************

Ncam settings web:

Ncam Admin Control: http://ip:8181/ (192.168.x.x or host-xx.org)
user: root
password: ldteam

Important: [CCcam] Change (0-9 and A-F) NodeID (Important to respect all 16 characters).

Change extended_cw_api in ncam.conf (Use 1 for ARM/PC (OE2.2), use 2 MPISEL/PPC (OE2.0)).

Start ncam with: ncam -b

Don't include -s (it's already set internally) or other unnecessary parameters or ncam will stop.

Change in ncam.conf max_time, cw_cache_size and cw_cache_memory:

max_time                      = 17 // The time that the ECMs are going to be ‎Keep in the cache‎.
cw_cache_size                 = 2700 // CW cache count Max storage size (Affects the CPU (don't set a value too high)).
cw_cache_memory               = 5 // MBs max. memory used for CW cache size (Affects the RAM, don't set a value too high).
ecm_cache_size                = 2700// ECM cache count Max storage size (Affects the CPU (don't set a value too high)).
ecm_cache_memory              = 5// MBs max. memory used for ECM cache size (Affects the RAM, don't set a value too high).

Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config

In order for the ICAM system to work without problems, modify the settings of your enigma2 image like this.
in the Enigma settings/extras (ATV/OPENLD/OTHERS: MENU/SETTINGS/OPERATION & INTERFACE/ system settings):

Set Integrate ECM in HTTP streams to YES
Decrypt HTTP Streams YES
Decrypt received HTTP streams NO

SoftCam.Key Not included!!
The emulator is inactive by default.

One very important thing to note, official NCam does not work the same as unofficial versions and the settings are not the same.

If you have any doubts, you can formulate it at https://www.lonasdigital.com/forums/ncam.1225/

***********************************************************************************************

Changelog v6.6-r1: - Fix bug that prevented ICam from working normally on some architectures. - Prevent ffdecsa from going through global optimization at compile time (Makes the system more stable). - Added new build for Armada 38x. --------------------------------------------------------------------
--------------------------------------------------------------------

+-------------------------------------------------------------------------------
CC      module-emulator-streamserver.c
CC      module-emulator-biss.c
CC      module-emulator-cryptoworks.c
CC      module-emulator-director.c
CC      module-emulator-irdeto.c
CC      module-emulator-nagravision.c
CC      module-emulator-powervu.c
CC      module-emulator-icam.c
CC      module-emulator-viaccess.c
CC      ffdecsa/ffdecsa.c
CC      module-csp.c
CC      module-cw-cycle-check.c
CC      module-dvbapi-chancache.c
CC      module-dvbapi.c
CC      module-gbox-helper.c
CC      module-gbox-sms.c
CC      module-gbox-remm.c
CC      module-gbox-cards.c
CC      module-gbox.c
CC      module-ird-guess.c
CC      module-monitor.c
CC      module-newcamd.c
CC      module-newcamd-des.c
CC      module-radegast.c
CC      module-scam.c
CC      module-stat.c
CC      module-webif-lib.c
CC      module-webif-tpl.c
CC      module-webif.c
CC      webif/pages.c
CC      reader-common.c
CC      reader-bulcrypt.c
CC      reader-conax.c
CC      reader-cryptoworks.c
CC      reader-dgcrypt.c
CC      reader-dre.c
CC      reader-dre-cas.c
CC      reader-dre-common.c
CC      reader-dre-st20.c
CC      reader-griffin.c
CC      reader-irdeto.c
CC      reader-nagra-common.c
CC      reader-nagra.c
CC      reader-nagracak7.c
CC      reader-seca.c
CC      reader-tongfang.c
CC      reader-streamguard.c
CC      reader-jet.c
CC      reader-viaccess.c
CC      reader-videoguard-common.c
CC      reader-videoguard1.c
CC      reader-videoguard12.c
CC      reader-videoguard2.c
CC      ncam-aes.c
CC      ncam-array.c
CC      ncam-hashtable.c
CC      ncam-cache.c
CC      ncam-chk.c
CC      ncam-client.c
CC      ncam-conf.c
CC      ncam-conf-chk.c
CC      ncam-conf-mk.c
CC      ncam-config-account.c
CC      ncam-config-global.c
CC      ncam-config-reader.c
CC      ncam-config.c
CC      ncam-ecm.c
CC      ncam-emm.c
CC      ncam-emm-cache.c
CC      ncam-failban.c
CC      ncam-files.c
CC      ncam-garbage.c
CC      ncam-lock.c
CC      ncam-log.c
CC      ncam-log-reader.c
CC      ncam-net.c
CC      ncam-llist.c
CC      ncam-reader.c
CC      ncam-simples.c
CC      ncam-string.c
CC      ncam-time.c
CC      ncam-work.c
CC      ncam.c
CONF    build/x86_64-pc-cygwin-ssl-libcurl-libusb-pcsc/config.c
LINK    Distribution/ncam-Unofficial-git1fa223d-x86_64-pc-cygwin.exe-ssl-libcurl-libusb-pcsc.debug
STRIP   Distribution/ncam-Unofficial-git1fa223d-x86_64-pc-cygwin.exe-ssl-libcurl-libusb-pcsc
BUILD   Distribution/list_smargo-Unofficial-git1fa223d-x86_64-pc-cygwin.exe-ssl-libcurl-libusb-pcsc