Since you have a dish ( 1.20m or more ) you can see ASTRA2
but note that you can not see the NORTH frequencies.
I am in Portugal with a 1.80 offset dish and see alll ( without north frequencies )
If you have a card it is ok. otherwise you need internet.
Good luck
It is a FERRARI clone of VU+SOLO
There are 2 versions - V2 and V3
The images are FERRARI images for ULTRA-Solo, OPEN 6000, etc.
Just look for them
OPENBOX 6000HD is a FERRARI clone of VU+SOLO
It uses the BH, OPENPLI, VTI ( V2 or V3 ) depends the box
Nothing with AMIKO8900 or AMIKO2
There are more similar boxes like ULTRA VU+SOLO, Etc.
Reveivers as AMIKO 8900 Alien, AMIKO2, Golden Media Triplex, Etc. belong to the kind of FULAN
receivers, so in some ways are different for other ones but they use the same DCC as the
DREAMBOX and CCcam or OSCAM as well. They are difficult to program so we must have patience
and experience and you must have the DREAMBOX DCC. Amiko1 has proc. 7111. AMIKO2 have 7162
SPARK
1º- If you have the image above xx51 you must update the image in the menu to xx51 (It is in SPARK menu)
because it has the new BOOTLOADER for SPARK and ENIGMA2. It take time. After you must update to xx61 and not
or other ( EUROPE )
2º-This image works with Cccam but the image does not have it, so you must get the plugin named "plugin"
and then put it in a pen FORMATED in FAT32. Go to plugin menu and load it
Then you have Cccamxx14. Key and it must be GREEN.
3º- Now you have Cccam and Cccam.cfg. Go to /VAR/KEYS/ and edit Cccam.cfg as the same
with DREAMBOX with DCC. Normaly users only use ENIGMA2
ENIGMA2
1º- Get in this forum a HDMU image ( 7162 ) is the best and have almost everything.
After, I remember to get the REVOLUTION SKINS ( Black ) ( White ) etc. because
these skins are exclusive of the HDMU image.
2º- Get a pen formated in FAT32 and make a folder " enigma2 "
3º- After decompress the image, you will get 2 files and send them to " enigma2" pen
4º- Receiver OFF
Pen with the image in the back usb
Key ON + O.K. at same time
When you see Force, leave the key OK
Key CH- till you see Enig.
key volume +
It will flash. It take time
When you see Succ and then BOOT, take off the pen
5º- In enigma2 it works with OSCAM. It is in menu. There are 2 OSCAM, 6666 and other
I use OSCAM 6666 and to activate you must go to menu the HDMU center and key GREEN
Before you have to go to the plugin menu and get it there. There you will find plenty of
plugins to download.
6º - The OSCAM works like the Cccam and you will find to edit in /VAR/KEYS/OSCAM.server
just follow instructions
ENABLE = 1
FILE = xxxxxxxxx,port
USER= xxxxxxxxxx
PASS= xxxxxxxxxx
There are much more to say but you must be-cool and you will get more experience.....
Reveivers as AMIKO 8900 Alien, AMIKO2, Golden Media Triplex, Etc. belong to the kind of FULAN
receivers, so in some ways are different for other ones but they use the same DCC as the
DREAMBOX and CCcam or OSCAM as well. They are difficult to program so we must have patience
and experience and you must have the DREAMBOX DCC. Amiko1 has proc. 7111. AMIKO2 have 7162
SPARK
1º- If you have the image above xx51 you must update the image in the menu to xx51 (It is in SPARK menu)
because it has the new BOOTLOADER for SPARK and ENIGMA2. It take time. After you must update to xx61 and not
or other ( EUROPE )
2º-This image works with Cccam but the image does not have it, so you must get the plugin named "plugin"
and then put it in a pen FORMATED in FAT32. Go to plugin menu and load it
Then you have Cccamxx14. Key and it must be GREEN.
3º- Now you have Cccam and Cccam.cfg. Go to /VAR/KEYS/ and edit Cccam.cfg as the same
with DREAMBOX with DCC. Normaly users only use ENIGMA2
ENIGMA2
1º- Get in this forum a HDMU image ( 7162 ) is the best and have almost everything.
After, I remember to get the REVOLUTION SKINS ( Black ) ( White ) etc. because
these skins are exclusive of the HDMU image.
2º- Get a pen formated in FAT32 and make a folder " enigma2 "
3º- After decompress the image, you will get 2 files and send them to " enigma2" pen
4º- Receiver OFF
Pen with the image in the back usb
Key ON + O.K. at same time
When you see Force, leave the key OK
Key CH- till you see Enig.
key volume +
It will flash. It take time
When you see Succ and then BOOT, take off the pen
5º- In enigma2 it works with OSCAM. It is in menu. There are 2 OSCAM, 6666 and other
I use OSCAM 6666 and to activate you must go to menu the HDMU center and key GREEN
Before you have to go to the plugin menu and get it there. There you will find plenty of
plugins to download.
6º - The OSCAM works like the Cccam and you will find to edit in /VAR/KEYS/OSCAM.server
just follow instructions
ENABLE = 1
FILE = xxxxxxxxx,port
USER= xxxxxxxxxx
PASS= xxxxxxxxxx
There are much more to say but you must be-cool and you will get more experience.....
There are3 ways:
1º - Use tuner 1 and tuner 2
2º - If you use only 1 tuner, make a cable to connect TUNER 1 OUT to TUNER2 in
In this mode you have TUNER A ( not Connect ) tuner B - loopthrough tuner C
3º - Tuner C:- simple, disecq 2, 4
Last images are not good.
Try HDMU 1380 it is O.K.
Can someone tell me how to load Today KEYS for the Amiko 8900
Alien 1
Thanks
first introduce yourself here http://linuxsat-support.com/introductions/
