Don't mean to hijack the thread,just asking if this key updater will update MTN on 57E C band ?
cheers
Posts by clanser
-
-
openpli 4 given me no problems so far on this box
-
RCA analogue connectors are a waste of time as previously stated here.
Co ax and optical are the same digital stream with sends all available audio channels to a surround sound home theatre amp.
It is only the way the signal is sent to the home theatre amp that differs between these two, ie co ax is via a physical cable and optical via an optical (light) link
-
Are trying to mount a sandisk 16 gig flashy for timeshift on my Zgemma 2S.
It is detected in harddrive setting and have managed to format/initialise it and converted file system from ext3 to ext4 successfully.
I cannot find mount manager to see if USB drive is mounted (openPLI4 image installed)
In timeshift setup there shows no option to point to the USB drive,only internal flash.
Please someone who has got this to work point me in the right direction,
Cheers -
After changing this in config, extended_cw_api = 0, I get found in webif but no pics on TV and error gone in live log
After changing back to extended_cw_api = 2 pics return
Any other idea what to change in configs ?Thanks
-
Tried some other UA keys,had pictures after 2 minutes !
What is this invalid argument error in log ?
Is it a problem with my config ?
2016/02/19 19:35:42 75CF63F3 c (dvbapi) ERROR: ioctl(CA_SET_DESCR): Invalid argument
2016/02/19 19:35:42 75CF63F3 c (-) -- Skipped 1 duplicated log lines --
2016/02/19 19:35:42 75CF63F3 c (ecm) localuser (0E00@000000/0000/0069/40:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX): found (6 ms) by emulator
2016/02/19 19:35:43 75CF63F3 c (dvbapi) ERROR: ioctl(CA_SET_DESCR): Invalid argument
2016/02/19 19:35:43 75CF63F3 c (-) -- Skipped 1 duplicated log lines --
2016/02/19 19:35:43 75CF63F3 c (ecm) localuser (0E00@000000/0000/0069/40:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX): found (6 ms) by emulator
2016/02/19 19:35:44 75CF63F3 c (dvbapi) ERROR: ioctl(CA_SET_DESCR): Invalid argument
2016/02/19 19:35:44 75CF63F3 c (-) -- Skipped 1 duplicated log lines --
2016/02/19 19:35:44 75CF63F3 c (ecm) localuser (0E00@000000/0000/0069/40:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX): found (7 ms) by emulatorThanks joeuser
-
Wanted to edit out the keys in post number 5 of this thread
http://linuxsat-support.com/showthread.php?t=104831&p=335792#post335792
in line 2 and 3 of log that was posted.
cheers
-
Sorry if i am being an idiot,but I cannot figure out how to edit a post I made a few weeks back.
How is this done,there is no Edit Post button at bottom of post ?
cheers -
Manually added keys do work
How to confirm the key is really still valid ?
thanks -
Your latest version of oscam emu got me an áctive'user and reader,thanks for that !
No 'send'messages in live log but EMM's were being written.
After a few hours without pictures I saw the following in the livelog...2016/02/13 14:20:59 3E4DFAEA c (reader) emulator [emu] Successfully added EMM to /usr/keys/emulator_unique_emm.log
2016/02/13 14:20:59 3F36AC5A r [Emu] Key found in EMM: P XXXXXXXXXXX -> REJECTED (looks invalid) UA: xxxxxx
2016/02/13 14:20:59 3F36AC5A r [Emu] Key found in EMM: P XXXXXXXXXXXXX-> REJECTED (looks invalid) UA: xxxxxx
2016/02/13 14:20:59 3F36AC5A r (reader) emulator [emu] localuser emmtype=unique, len=155 (hex: 0x9B), cnt=1: written (4 ms)
2016/02/13 14:20:59 3E4DFAEA c (reader) emulator [emu] Successfully added EMM to /usr/keys/emulator_unique_emm.log
2016/02/13 14:20:59 3F36AC5A r [Emu] Key not found: P 006D 01
2016/02/13 14:20:59 3F36AC5A r [Emu] ECM failed: Key not found
2016/02/13 14:20:59 3E4DFAEA c (ecm) localuser (0E00@000000/0000/006D/40:5C8B744F136CCDF716E6EBD4BEB93039): not found (7 ms) by emulator
2016/02/13 14:21:00 3E4DFAEA c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 0 disabled ecmpids!
2016/02/13 14:21:00 3E4DFAEA c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1920 VPID 1921
2016/02/13 14:21:00 3F36AC5A r [Emu] Key not found: P 006D 01
2016/02/13 14:21:00 3F36AC5A r [Emu] ECM failed: Key not found
2016/02/13 14:21:00 3E4DFAEA c (ecm) localuser (0E00@000000/0000/006D/40:C9F60E0DCC44F80F99384AFB4C0B2350): not found (7 ms) by emulator
2016/02/13 14:21:01 3E4DFAEA c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
2016/02/13 14:21:01 3E4DFAEA c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1920 VPID 1921
2016/02/13 14:21:01 3F36AC5A r [Emu] Key not found: P 006D 01
2016/02/13 14:21:01 3F36AC5A r [Emu] ECM failed: Key not foundThe UA seems valid,according to the above log.
I read somewhere there is another algorythm in use by some providers,is this the problem here ?
If so,is there a solution for this problem ? -
Thanks joeuser for the info and the link.
Do my configs look OK for the AU EMM to update properly ?
Is there anything else that needs to be specifically set in configs for AU to work that may have been missed ?
Cheers -
Afternoon lads,
Harshy had this problem as well,not sure if he reolved it.
I am using joeuser's oscam-emu 11205 for MTN on 57E powervu as I need dvbapi functionality on a Zgemma 2S receiver,works fine with ECM keys,when using an EMM key gives a "no keys found error"in live log,never seen the SEND message.
AU also stays "on" never says "active" even though au = 1 in dvbapi and au = emulator name in oscam.user.
Have EMM key in oscam.keys as follows : P 0069 0xxxxxx7 xxxxC124xxxx8 ; EMM Key
Have the same EMM key listed for each SID in oscam.keys.
Some configs below ...[dvbapi]
enabled = 1
au = 1
pmt_mode = 6
delayer = 60
user = localuser
extended_cw_api = 2
boxtype = dreambox[account]
user = localuser
au = emulator
group = 1[reader]
label = emulator
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000
group = 1
#emmcache = 1,1,2,1
emmcache = 2,2,2,0
emu_auproviders = 0500:030B00;0604:010200;0E00:000000;4AE1:000000Any idea how to get AU EMM working ?
-
All the best for 2016,lads
Hope it is a good one ! -
It does not.
Will use USB DVB-S2 tuner if can find a working build of oscam for this device or set it up as a proxy. -
Hi All,
Does anyone have/know of a build of oscam that will run on this S805 eagle box with ARM processor ?
cheers for any info. -
new oscam+emu for Android
OSCam: 1.20-unstable_svn Build: r10932 Compiler: arm-linux-androideabi-ssl
[Emu] oscam-emu version 716Code
Display MoreUnix starttime: 1438530396 Starttime: 02.08.2015 18:46:36 Version: oscam-1.20-unstable_svn-r10932 Compiler: arm-linux-androideabi-ssl Box type: generic (generic) TempDir: /tmp/.oscam ConfigDir: /sdcard/config/ WebifPort: 8888 Web interface support: yes LiveLog support: yes jQuery support intern: yes Touch interface support: yes SSL support: yes DVB API support: yes DVB API with AZBOX support: no DVB API with MCA support: no DVB API with COOLAPI support: no DVB API with STAPI support: no DVB API with STAPI5 support: no DVB API read-sdt charsets: yes Irdeto guessing: yes Anti-cascading support: yes Debug mode: yes Monitor: yes Loadbalancing support: yes Cache exchange support: yes CW Cycle Check support: yes LCD support: no LED support: no Emulator support: yes Clockfix with realtime clock: yes IPv6 support: no camd 3.3x: no camd 3.5 UDP: yes camd 3.5 TCP: yes newcamd: yes CCcam: yes CCcam share: yes gbox: yes radegast: yes scam: yes serial: yes constant CW: yes Pandora: yes ghttp: yes Reader support: yes Nagra: yes Irdeto: yes Conax: yes Cryptoworks: yes Seca: yes Viaccess: yes NDS Videoguard: yes DRE Crypt: yes TONGFANG: yes Bulcrypt: yes Griffin: yes DGCrypt: yes cardreader_phoenix: yes cardreader_internal_azbox: no cardreader_internal_coolapi: no cardreader_internal_sci: yes cardreader_sc8in1: yes cardreader_mp35: yes cardreader_smargo: yes cardreader_pcsc: no cardreader_smartreader: no cardreader_db2com: yes cardreader_stapi: no cardreader_stapi5: no cardreader_stinger: yes
Any chance this apk will work on an eagle box S805 ?
wetek and eagle box both have arm processors inside.
cheers for any info -
jenseneverest what image do you recommend for zgemma 2s ?
dont mean to hijack this thread,
cheers -
Does nobdy know how to do this ???
-
Good day chaps,
Have managed to get crossepg running on my old DM800 but my provider is not shown in the download list.
I can get an xmltv file for my provider but cannot figure out how to get crossepg to use this local file on my HDD instead of the URL the conf file usually point to.
Must a .conf file be created for my provider and if so, what should the contents of this file be ? -
I am not in the UK,what will need to be edited to display my providers channel names correctly ?