the box is already goes to rescue mode by turning on the device
I am reading the topic and I am surprised, you do not hear and do not see or do not want to hear and see advice from a competent user, here is your solution to the problem and you go around in circles and write the same thing.
Personally I don’t use barry allen nor the l multiboot I prefer an image one immagne
yes, you can eat soup with a fork, that's your problem, that's the first, and the second - my post was not addressed to you.
carefully read my previous post, where is your nickname or a quote from your message?
but for the 900 there is nothing?
Use the plugin for a lot of downloads -Barry Allen.Install any image from version 920 on your 900th...
and do not bring the receiver to destruction by frequently changing images in the receiver's flash memory, since the quality of the chip leaves much to be desired, it is cheaper to replace a USB or SSD drive, depending on what Barry Allen is installed on, than to repair the receiver.
dm920 - Python 3.12.3 - openimage-develop homebuild 2024.05.10 from Satpong
- Python 3.12.3, GCC 13.2.0, Binutils 2.42, Glibc 2.39, OpenSSL 3.3.0
- ServiceApp, FFmpeg 6.1.1, GStreamer 1.24.3
- Ciplus, OScamstatus, OScam-emu 11781
- OpenWebif, EPG-Import, File Commander, Youtube 1203, ...
- HDMI-IN, Display skins, ...
- astra-sm + bouquets abertis, T2-MI, ...
- Streamlink 6.7.3 + bouquets, iptv/web streams
- E2 settings Motor 75°E-45°W
- blindscan, cablescan, fastscan, terrestrialscan
- feed dm920/drivers/settings/picons/skins/pluginsThank you brother. Now that's what you need. and now this image is starting in my 900.
I will take the backcap by plugins backupflash
nevertheless, in order for the image to start, I think it's right to do it as I described to you the procedure in the message above. Barry Allen does not bind the image to the drivers, and therefore it is possible to install images from different receivers without spoiling the receiver itself. the maximum that can be obtained is an image that does not start or an image that is half functional.
Codehttps://mega.nz/file/pEkxlBoQ#Yogi3KHsn54fe10pAMeJIOGceb5VO9t8Bw3pqbNGlWU
thanks brother, but the wrong format I showed in the screenshots does not see Barry Allen in such an archive, your backup is tar, you need the foramat to be tat.gz or tar.bz2 or tar.xz
Backup needs to be done from under the image that is poured into the flash memory of the receiver, the image in which you installed the barry allen plugin, then the backup is done in the correct archive -tar.gz
Look, I don't have an error in the message- no such file of directory
Only Python version is different 3.9.9
but no work for now last MS+ :(
nonsolosat 32-py3 gbquad4k
gbquad4k login: root
Last login: Sat May 4 16:07:06 MSK 2024 on pts/0
root@gbquad4k:~# opkg install /tmp/*.ipk
* Solver encountered 1 problem(s):
* Problem 1/1:
* - conflicting requests
* - package enigma2-plugin-extensions-multi-stalkerpro-1.1+git161+e7a638f-r0.armv7ahf-neon does not have a compatible architecture
*
* Solution 1:
* - do not ask to install enigma2-plugin-extensions-multi-stalkerpro-1.1+git161+e7a638f-r0.armv7ahf-neon
root@gbquad4k:~#if users have the same error as me, then I think questions to the team of image softwriters, why swears at requests
image work via Barry Allen in the Dreambox 920
yes, it will be on 920 because the image is compiled with the binding of the kernel.bin.dm920 file, but on 900 it does not start, more precisely, the boot log type appears and the receiver turns off, you press the power button and you can do this indefinitely...If you can, then make a backup of a clean image with the help of Barry Allen and post it here, please.
SatLodge v13.3c Unstable 20240502.Tar.bz2
Image doesn't work at barry allen in dm900,
2024.04.30
online image update 20240430 <> 20240502
update:
- enigma2-develop-20240502
- add Zap mode option (Menu - Setup - System - Customize - Zap mode - Hold screen <> Black screen)
- gstreamer 1.24.3
- oscam-emu 11779
- youtube 1196
...
Hi, my husband is looking to upgrade our old dreambox (17years old) and I am doing research trying to find the best available. I found the DM900
Hi, yes, 17 years is a decent time... Of course, you need to update the dreambox if you used the dreams image.The reasons, in my opinion, are the simplest: on satellite receivers, the launch is very fast, and the images are already 2.5/2.6 times more perfect, and they are supported by software development teams.If you need a dreambox receiver, then, in my opinion, only dreambox one and dreambox two are promising. the satellite and cable models of the dreambox one, but with access cards, more precisely with the number of slots-here you will be disappointed.You can look at any makretplace where these receivers are sold and see for yourself and calculate how many of them there are.
New update:2024.05.01
2024.04.28
the feed did not work in this build. the author provided a solution by installing two packages, or you can install the build from today with a working feed
CI MODULE
dude, so there is a priority for my module, register your provider and caid it and overload the receiver.
warning: some plugins are not available extensions/openwebif(Erno2) No such file or directory: media/ba
Well, I informed you about this earlier that the barry allen plugin will not be visible.
show the answer and the command in the telnet
df -hThis is not a mounted dsc on which Barry Allen plug-in is installed. I ruled in etc/fstab
but first, show the answer to the command from telnet
the selection criteria
BCM 725X 
For example, I have an Octagon 8008 Twin device.
Hi, it's about the multiload plugin itself- Barry allen. I can't tell you anything for the octagon, I also have such an 8008 receiver, But as for the criteria for choosing an image from which receiver can be suitable for multiloading the dreambox 900-920, I select it by trial and error. often the images do not start, but for example they can work from gemma7,GI-ET1100, but they are ideally suited from gigablue quatro 4k.Because there is an LCD display and everything works almost perfectly. 
i use barry allen where can i download rootfs.tar.bz2 (nonsolosat image )
quad4k
Is everything clear to you in the screenshots? how to create an image in Barry Allen, I hope you know?
Bro i also want where can i download to dm900
