€30
of course, you can completely replace the muzzle of the receiver, but it is much cheaper to buy a chip https://aliexpress.ru/popular/et6226m.html (1$) and a display - or remove it from the donor, they are suitable from some models of T2 "soap dishes", for example BBK. 
Guys, this is a problem in low-quality components of the LED display and the control chip on the front panel of the receiver - I solved this problem with the replacement of the ET6226M chip, but the bleating resumed for a long time. The receiver, after switching on, lived its own life, channels spontaneously turned on, I can go to the recovery menu myself - although even the batteries were removed from the remote control. .IT IS NECESSARY TO CHANGE BOTH THE CHIP AND THE LED DISPLAY IN PAIRS TO OBVIOUSLY NEW OR SERVICEABLE ONES .
If you do not have these spare parts, a quick quick exit to restore the receiver's operation - in general, what I have done so far is to raise the 10pin U1 Vcc power supply-the display, LED and power button on the front panel of the receiver do not work... BUT the receiver ITSELF is controlled from the remote control and is fully functional.
there is no exact circuit for this receiver, I did not find a typical circuit, that's what I did.
The system simply reboots when press text button.
thanks.
take off the work log and show it, otherwise you will endlessly prove to the author that you are working and that you are not working..
give a command to telnet and then do everything you did until the system reboots -then provide the log here
init 4enigma2 2>&1 |tee /tmp/e2.logEnigma will restart, and the work log will be written to both the file and the telnet at the same time
You need to run the plugin to perform actions that lead to the error wait a bit. We will get the log here: /tmp/e2.log
P.S.: Perhaps again the multiboot sh*t ? Who mixes images and naturally fails... as developped by an incompetent.
that's where you're smart - giving incompetent advice and putting together castrated builds
We have a saying-"laughing for no reason is a sign of foolishness" I can diagnose your condition - it indicates mental retardation or senile morasm.. consult a doctor, I strongly recommend that you treat your head.
when will release for Dreambox Dm920
I repeat, if my answer did not reach your brain earlier, I use the Barry Allen multiload plugin -take an image from the gbquad4k receiver, unzip the zip archive, take the rootfs.tar.bz2 file, I renamed it like this- DM900UHD-PurE2-7.3-20231012.tar.bz2 and install it in barry allen, if the information in the information menu does not bother you about another receiver, then you are fully using the PurE2 7.3 image on your dm920. and there is no need to beg and kneel in front of the PurE2 software developers
Finally, learn how to fully use all the features of your receiver
enigma2_crash_1702489087.log
Crash log is old (8:38 PM). Blindscan plugin was updated yesterday (11:00 PM) changed pli to oe-alliance source.
Please try again.
enigma2_crash_1702409737.log
from the author of the image--" Remove blindscan plugin from systemplugins. And download it again from feed systemplugins.
(to get 2 options, hardware type or manufacturer)"
by the way I tried it several times but the result is the same.
can you check on the default image skin, Pli-FullNightHD?
BCM 45308X tuner it goes green screen
attach a crash log to the message, the author of the assembly will correct it, I think,
Crap multiboot software... better to use OpenATV Multiboot GPT,
it is after these images that the flash memory of dreamboxes one and two dies.. replacing flash memory helps, -your advice is complete crap to use open atv or any open image in dreambox receivers, and even more so multiloading from these commands.
dm920 - Python 3.11.7 - openPLi-develop - homebuild ! - Satpong
Python 3.11.7 (Release date: 2023-12-04)
- GCC 13.2.0
- Glibc 2.38
- OpenSSL 3.2.0
- BusyBox 1.36.1
- GStreamer 1.22.7
- FFmpeg 6.1
- CI+, CCcam 2.3.9, OScam 11726, OScam-emu 11726, ServiceApp, astra-sm, OpenWebif, ...
- blindscan, cablescan, fastscan, terrestrialscan
- feed dm920/drivers/settings/picons/skins/plugins
https://www.mediafire.com/file/n97r3q1cu8lk17l/openPLi-Py3-dm920-20231210-M.tar.gz/file
I have NordVPN, and I would like to know if there is a VPN plugin for Dreambox.
Yes, I can.
Bro, if you fill out the backup, remove the birds, as I showed in the screenshot. and when the image is clean, it is not recommended to upload something that may cause a problem.
Any plugin,telnet,feed,sw manager nothing installs
check out my post above in the subject of this particular image, all plugin installation options work. try reinstalling the image again.
OPENATV 7.2,
brother to you in the topic of openATV .. this is a topic for a different IMAGE. 
Installed today...but cannot install plugins manually only those available on the manager ??
three ways to install plugins on this image work. from the feed, through the software manager, and via telnet
Maybe the image feed is down. Run opkg update in telnet to see if its alive.
everything works..
I get “opkg not found”.Cannot install plugins
write in detail how you install and which plugin
Merlin stops working, the site and forum will be open until 12/31.23
Can anyone provide the download link?
Are you unable to open the spoiler? there are two links there, the first from the author of the assembly, the second from my Google drive -get it open, download from any
