Posts by hecha71

  • DM 900 UHD DREAMELITE 2.5 Some problems

    Quote from dragonfire

    I would like to ask, since I use the barryhallen and in flash there is dreamelite 7.1 OE 2.5, also mounting OE 2.0 images in multibbot, will they work correctly or will they have problems. :thinking face: :dish:

    Hi, you don't have to worry, install any images, even from the 900 clan, even from 920 in Barry Allen, they will work great. the only thing is if after installing such images as open atv 7.2 or egami10..and open ndf7. they will get stuck at the launch of something in the image stream elite that the kernel-module-nfsd is not fully installed in the flash memory of the resource. there are no problems with other images.here on my 900 I perfectly use the assemblies from fairbird BH-8.x for 920, as well as the assemblies from satpong open pli920

  • ffmpeg install problem nothing provides libavdevice58>=4.2.1

    Quote from xyips32

    nothing provides libavdevice58

    it's a little unclear to me, did you manually install ffmpeg by unpacking the package and spreading the files into folders? where does your error write in telnet which plugin refers to the lack of this dependency? the liba ibavdevice58 itself does not have an image on the Satdreamgr feed . you can, as an option, replace the feed from the satpong imid and already install ffmpeg from under it, in theory, it should pull up more recent libavcodec.so.59.37.100 libavdevice.so.59.7.100 libavformat.so.59.27.100

    well, as an option, I can give you these dependencies, put them along the way as in the screenshots and create the symlinks yourself, only you will create the symlinks not 59, but 58. an example is libavdevice58 ->libavdevice.so.59.7.100

    symlinks are right 777 and libam 755 everything is visible in the screenshots


    but I would do the first method of substituting the feed in etc/opkg. install enigma replace the contents of the opkg folder run enigma and install ffmpeg.


    I will attach both the libs and the opkg folder in the attachment . but if I were you , I would switch to an image that works great - this is an assembly from mrlu- RE: openpli 11.3 - dm900 - original & sim2.30 - 2022-12-07 . but in any case, good luck to you in your perversion))))

  • ffmpeg install problem nothing provides libavdevice58>=4.2.1

    Quote from xyips32

    Image Satdreamgr

    Code
    root@dm900:~# opkg list | grep ffmpeg
the line player using the ffmpeg   solution
ffmpeg - 4.2.1-r0 - A complete, cross-platform solution to record, convert and
stream audio
ffmpeg-src - 4.2.1-r0 - A complete, cross-platform solution to record, convert
nd stream audio
root@dm900:~#
root@dm900:~# opkg download ffmpeg                              
Downloaded ffmpeg as ffmpeg_4.2.1-r0_cortexa15hf-neon-vfpv4.ipk.
root@dm900:~#

    try to unpack the package and decompose the files into folders files in the bin directory rights 755 and a complete restart of the receiver

  • install oscam on dreambox one

    Quote from max95100

    /tmp/enigma2-plugin-softcams-oscam_11715-emu-r798_all (1).deb


    :grinning face with smiling eyes: softcams-oscam_11715-emu-r798_all (1) .deb


    softcams-oscam_11715-emu-r798_all.deb :thumbs up:

    oh, you're a freak friend, rename the package as I showed you, put it in the tmp folder and give the commands that I gave below..

    Code
    apt update
dpkg -i /tmp/*.deb
apt -f -y install

  • OpenATV 7.3 Python 3.11 Images

    Quote from babsy98

    the atv dm820 dont have the webkit hbbtv addons, have you more infos how to add this to dm820

    when installing the plugin I mentioned on dreambox 820, image atv7.2.the information line about the installation from the feed was pulled up by another 9 packages, installed by means of image aiz software management options. Therefore , I cannot say which other packages were pulled up from the feed . I can basically reinstall the image and put a package from telnet on a clean one and show the installation log if it helps you

    p.s.


  • Need Advice On Best Image For IPTV

    yes, in fact, I prefer any image of openpli and open atv, for the normal operation of IPTV ,from the feed install the system plugin service app.

  • [DM920] openPLi-python3-dm920 "homebuild"

    Quote from gaccu

    Something appears to be missing…


    Quote from Lexzie

    Yes I would like to have a new link too...please.


    Quote from andy58

    can you please have the link?

    if you already had this image, you don't need to install it again, just update it online. read the topic!

    Post
    RE: [DM920] openPLi-python3-dm920 "homebuild"
    (Quote from W@Rp)

    from the author of the build
    "The latest home build of openpli-py3.11-dm920-20221112 has its own channel.
    From now on, you can perform online updates.
    Doing an online update is safe.
    Sincerely yours"

    it is strange that this topic does not have this message from the author of the image, you cannot install the image, but simply update it online :scratch_one-s_head:
    hecha71

    if you put it for the first time-here download

    Code
    https://drive.google.com/file/d/1h99rWKkbvyMnVNk9l0t25yft3UooqLga/view?usp=sharing

  • BlackHole 8.x PY3 DM 920 UHD

    Quote from 6Kev94

    Hllo master, is there also an image for the DM900 UHD or can you scrap the soon. Thanks for an answer!

    bro, the best option is to install Barry Allen and use this plugin to use any images for 900 , I have a dreambox 900, I install images from both clon900 and 920 and they work fine in my 900 -I recommend. you will immediately see the difference, it is possible to put from 920 not to wait for someone to compile under 900. good luck!!!

    Post
    RE: Multiboot flash image with Barry Allen for DM920
    (Quote from vs2009)

    hello, and what solution do you need?, install any of the latest dream os-based image into the receiver's flash memory, install the media into the receiver on which you will install the Barry Allen plugin, I pre-formatted it in ext4, the media does not mount in any case, when installing Barry Allen, the plugin will mount it itself as need,
    after connecting the receiver to the computer via ftp, place the installation package in the tmp folder and give the command from telnet
    …
    hecha71