hecha71 , please can u send me a direct link for " VU+UNO 4k SE " , Thanks
sorry,the author of this image does not collect images for vu+ receivers
try this one https://drive.google.com/file/…yc1GkFJQDwwIlvkgj6oF/view
Posts by hecha71
-
-
please can u send me a direct link becouse i can't download it ??? pls bro
-
who's the better image for OCTAGON SF8008 UHD..........OPENATV 6.5 or OPENPLI 7.3 ???
ATV 6.5 in test mode, I advise you to put this image on the octagon 8008,it is based on openpli
-
link for 6.5 nightly ?
for vu+ ?
guys in the first post I wrote online download..so start your receiver with atv6. 4 go-menu-settings-SOFTWARE management-firmware online ..erase the screenshot..
and you will see there is a test 6.5 for your receiver
-
you can download the image online
-
upload this file http://downloads.openpli.org/b…08-20200623_multiboot.zip place it on a USB drive and insert it into the side port of the USB receiver. then go to the restore menu or from the remote control or disable the receiver and hold the button on the front panel of the receiver and turn it on wait for the recovery menu to appear select the USB multibutt image upgrade section
-
hello brother
i couldnt install it on octagon sf8008
it stucks on boot
is there anyway to install it ?
Hi, it's hard to say, you didn't write which image you installed-recovery or multiboot and how you uploaded the image via firmware offline or via the recovery menu
-
-
-
[Придаем = '147439', 'ни', 'правда'] [/ присоединять] [присоединять = '147438', 'никто', 'правда'] [/ придаем] [присоединять = '147437', 'никто',» true '] [/ attach] PLS Мне нужна мультизагрузка OPENPLI IMAGE для OCTAGON SF8008 4K
открой PLI со всеми последними изменениями для восьмиугольника 8008
-
Display MoreDisplay More
I have already done some tests ..... you can try everything .... when it is ok, load the firmware and the reboot shows the wording in red that the firmware is not for that model.
The only image to upload in my opinion is the openatv for that model.
The posted link is a Russian forum where something unofficial is found but the results are not satisfactory
https://gisclub.tv/avtorskie-i…ija)/msg569014/#msg569014
does this one not meet your needs?.in my opinion even better than 7.2 on octagon 8008!.open PLI image made but did not bring to mind
With the language it is not easy to understand .... in any case, you cannot download anything in the link ......
On the same site I found an unofficial openpli image for uclan but the results obtained do not deserve installation
really? I am not a polyglot, but it is not difficult for me to register in English, German, Polish, Spanish, Arabic, etc.forums...and download the files I need. images from the link try
https://www.mediafire.com/file…p-ustym4kpro_usb.zip/file
https://www.mediafire.com/file…ltiboot_ofgwrite.zip/file
p.s. already here on the forum I wrote the reason for the failures of some users-this driver should be changed "hands from the hip joint":rasta2bigsmoke0gf1:
if you knew how beautiful it sounds in Russian-"руки из жопы"
-
I have already done some tests ..... you can try everything .... when it is ok, load the firmware and the reboot shows the wording in red that the firmware is not for that model.
The only image to upload in my opinion is the openatv for that model.
The posted link is a Russian forum where something unofficial is found but the results are not satisfactory
https://gisclub.tv/avtorskie-i…ija)/msg569014/#msg569014
does this one not meet your needs?.in my opinion even better than 7.2 on octagon 8008!.open PLI image made but did not bring to mind
-
a0e8e33cff.jpgOpen Vision 10.1 r147
new - Open Vision 10.1 r151 20.05.2020
Codehttp://openvision.ftpaccess.cc/images/openvision-develop/sf8008/new - Open Vision 10.1 r152 21.05.2020
-
Hi taha90 ,I installed this image..but only in one of the first 4 partitions on the receiver's flash memory, but this image can't be installed on two partitions in the SD card
-
n General, so..I have a multiload of 4 sections on the flash receiver and 2 on the SD card..here is a section in the sections on the SD card of the open vision image does not want to go..only on the receiver's flash memory
maybe someone else, but I also formatted the SD card in the recovery menu ...
-
how do I install this image? in the USB recovery menu, multiboot image upgrade does not see this package with an image of openvision-enigma2-Development-extralanguage-9.3-r145-sf8008_usb on a USB flash drive
openvision-enigma2-develop-extralanguage-9.3-r145-sf8008_mmc -when you rename the usb to mmc , it sees, but does not install..why?
-
There is a problem with Multiboot Selector Image that needs to be added and it will be a complete picture
here's the news..and then there is who does not know
,I look at the above post you do not read or do not understand what I reported earlier,in order for the menu to appear multizagruzka-it is necessary to completely assemble the image on a new basis with all the new products that were made by the manufacturer octagon, the author of this image Ednaz knows about the problem and promised to have free time. compile a new open black hole with a new multiload.
-
Use latest OpenPLi 7.2 or 7.2Star to have stable IPTV software,
Emonot the fact that only your image is pli7.2 SIM Jafar works great with IPTV, so my provider's playlist also works great.with PURE2-6.2-dm800se-PurE2-6.2-20200502 100% verified, so the keyword " you will need a subscription from your provider and an IPTV player plugin to view channels."as reported by master G.
to view IPTV I convert my playlist to bouquets using this plugin https://github.com/pepsik-kiev/e2m3u2bouquet and Epgimport I load the actual EPG
-
so thinks to you
Guys, I'm not the author of this image, the author knows about the problem, if he thinks it necessary to compile a new image, then you will find out about it:rasta2bigsmoke0gf1:
-
It's still the same image from the first post only with another kernel.bin so it will boot in the new multiboot, nothing more, nothing less.
So you don't do anything wrong
It is absolutely true that the image menu does not have a multiboot option after replacing the kernel.bin, and to have a choice in the menu, you need to compile a new image .
