/var/etc/CCcam.cfg for cccam
/var/etc/tuxbox/config for oscam
/var/etc/CCcam.cfg for cccam
/var/etc/tuxbox/config for oscam
I managed to solve. As nehaxak said in another thread we are prisoners of our habits and have managed to find the right paths. Copied all my data and I finally found the light. I sincerely thank everyone for their patience and I wish you every possible good.
Thank you
Display MoreIf you have installed dream-elite-extra then just do a software update and reboot the dreambox tp have the latest packages.
After reboot just go into Dream-Elite Extensions Management and download Softcam Manager, Cccam and Cccam Configuration
After installing do a reboot and then just put your line in the config file (which is in folder /var/etc/Cccam.cfg) and then go to the Softcam Manager and start Cccam with green button
I do not really know what you are doing or not and even not knowing which dreambox you have.
But i do not agree with your statement. Here on my dream boxes is working all very wellAnd many other users since 2 weeks even had not these problems ;)
But you are free to choose and wish you a good time with Gemini
No Problem :)
I just installed a new clean image.
I have followed, step by step, all your instructions.
There is no CCcam.cfg file in the / var / etc / folder to edit.
I copy the CCcam.cfg file I had previously saved and paste it in the etc folder, I restart the decoder and always black screen ECM / pid N / A
EDIT:
I have now performed the same procedure to install the oscam and also for this softcam the "config" folder in which to insert or edit the files is not generated
Just read my statement to this here
I think you have misconfigured your dreambox
And it is not necessary to write now in each thread the same
Sorry...really sorry. I'll continue in the other thread
Imagine if I don't want to go back to my dear old Dream-Elite.
I went through all the steps you described, including the software update which found nothing.
My decoder is a DM900UHD and if I'm using the Gemini it's only because I was orphaned by the Dream Elite. I will try again
Come già scritto in un altro thread anche installando le configurazioni dal DEP di cccam e oscam, al riavvio del decoder non c'è nessun file da modificare sia in / etc (per cccam) che nemmeno in etc / tuxbox / config. Nessuna cartella e nessun file.
Non è mai successo con altre immagini che ho usato sul mio DM900.
As already written in another thread even installing the configurations from the DEP of cccam and oscam, when the decoder is restarted there is no file to edit both in / etc (for cccam) and not even in etc / tuxbox / config. No folders and no files.
Never happened with other images that I have used on my DM900
Unfortunately I also gave up after 3 hours of trying.
This is not the first time I install a cccam and I have never had any problems but I just can't get it to work with this image. I installed the DE-extra plugin, installed the softcam and the softcam manager. Copied the CCcam.cfg file to / etc and then, as suggested created (after a clean new install) the path /var/etc/CCcam.cfg. No cam works, not even the Oscam.
Obviously I have repeatedly restarted the decoder during all phases.
Oddly, with the image I was using ie DreamOS + GP4., No kind of problem.
Really a shame to have waited so long and then have to give up.
P.S. Dreambox DM900UHD
Great news and already downloaded but who knows about DE-Extra for install blue panel? Seems that the version for DE 6.0 isn't compatible whit new image.
Thx. Very good image
please try this PurE2 Image klick me
Thank you teak-won-do.
I have seen the screenshots of the image and it looks good. Do you already know if the decoder lcd screen works as on the dream-elite or showing the picon of the channel? In the meantime it is being downloaded
Or the attached image.
Thank you very much master G
18 months have passed since the last update released by dream elite for the dm900 and I have decided not to wait any longer for the mirage of an update. However, I cannot find a valid aesthetic and functional alternative. For example now I am using a "demonisat - DMS" image and it seems to be fine (less with the cccam but better with the oscam), pleasant the Zskin but leaves out the customization of the small display on the decoder.
Can you help me find a current image, aesthetically customizable, reliable and simple to configure for the various emu-cams and well supported by developers?
In practice it is as if you were asking for an evolution of the old and now obsolete dream-elite.
Thank you so much for any help you can give me.
Ok ripristinato il plugin. Non vorrei che tutti questi casini sono dovuti all'immagine "dream-elite" che uso.
Comunque ri-funziona tutto.
Grazie
Display MoreLu...ho visto che hai tiurato fuori una splendida 5.3 ma selezionando aggiorna da xcplugin non fa l'update. Dobbiamo farlo manualmente ?
Grazie
conviene che reinstalli non so che versione hai su.
Io ho provato da 5.2 a 5.3 aggiornamento eseguito con successo..
Work Perfect.
Effettuato aggiornamento e plugin sparito dal dreambox.......?(?(?(
Volevo scaricarlo manualmente per ripetere l'installazione manuale ma non c'è il file deb.....confermi?
I did the update from plugin menù but after restart the gui xcplugin is gone (where I don't know).
I've tried to download manually but there isn't deb verion....confirm ?
Esatto
E funziona.......sembra molto lento ma funziona. Grazie infinite
Grazie per la risposta ma non esiste nessuna altra cartella xcplugin.
Nella cartella unistall c'è enigma2-plugin-extensions-XCplugin_1.3_remove.sh e se eseguo lo script mi dice che non c'è nessun xcplugin installato
EDIT scompattando il file deb dovrei in pratica inserire manualmente il contenuto della cartella data (etc e usr) manualmente nelle loro normali destinazioni?
Ovvero la cartella xc in \etc\enigma2
VNetSpeedInfo.py in \usr\lib\enigma2\python\Components\Converter
e la cartella xcplugin in \usr\lib\enigma2\python\Plugins\Extensions
Giusto?
Chiedo scusa davvero per non usare l'inglese ma non saprei come spiegare.
Purtroppo non riesco ad installare il tuo plugin
Questo è quello che compare dalla scehrmata di putty:
Dream-Elite 2.5.0 dm900
dm900 login: root
root@dm900:~# apt-get update
Ign http://feed.dream-elite.net ./ InRelease
Ign http://feed.dream-elite.net ./ InRelease
Ign http://feed.dream-elite.net ./ InRelease
Ign http://feed.dream-elite.net ./ InRelease
Ign http://feed.dream-elite.net ./ Release.gpg
Ign http://feed.dream-elite.net ./ Release.gpg
Ign http://feed.dream-elite.net ./ Release.gpg
Ign http://feed.dream-elite.net ./ Release.gpg
Ign http://feed.dream-elite.net ./ Release
Hit http://feed.dream-elite.net ./ Release
Hit http://feed.dream-elite.net ./ Release
Hit http://feed.dream-elite.net ./ Release
Ign http://feed.dream-elite.net ./ Packages/DiffIndex
Ign http://feed.dream-elite.net ./ Packages/DiffIndex
Ign http://feed.dream-elite.net ./ Packages/DiffIndex
Ign http://feed.dream-elite.net ./ Packages/DiffIndex
Hit http://feed.dream-elite.net ./ Packages
Hit http://feed.dream-elite.net ./ Packages
Hit http://feed.dream-elite.net ./ Packages
Hit http://feed.dream-elite.net ./ Packages
Ign http://feed.dream-elite.net ./ Translation-en
Ign http://feed.dream-elite.net ./ Translation-en
Ign http://feed.dream-elite.net ./ Translation-en
Ign http://feed.dream-elite.net ./ Translation-en
Reading package lists... Done
root@dm900:~# dpkg -i /tmp/*.deb
(Reading database ... 27324 files and directories currently installed.)
Preparing to unpack .../enigma2-plugin-extensions-xcplugin-iptv-mod-lululla_5.2_all.deb ...
Checking for an older version in the system...
Proceeding to installation...
Unpacking enigma2-plugin-extensions-xcplugin-iptv-mod-lululla (5.2) ...
dpkg: error processing archive /tmp/enigma2-plugin-extensions-xcplugin-iptv-mod-lululla_5.2_all.deb (--install):
trying to overwrite '/usr/lib/enigma2/python/Plugins/Extensions/XCplugin/keymap.xml', which is also in package enigma2-plugin-extensions-xcplugin 1.3
E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable)
E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
Plugin removed! You should restart enigma2 now!
Errors were encountered while processing:
/tmp/enigma2-plugin-extensions-xcplugin-iptv-mod-lululla_5.2_all.deb
root@dm900:~#
So che esiste un'altra versione che dovrei disinstallare (enigma2-plugin-extensions-xcplugin 1.3) purtroppo non so come fare.
In questo percorso (/usr/lib/enigma2/python/Plugins/Extensions/) nNon compare nessuna cartella xcplugin e nemmeno il file keymap.xml.
Come faccio a rimuovere xcplugin 1.3 e qualsiasi altro riferimento per installare la tua 5.2?
Ho provato a fare da solo ma il risultato è stato il dover riflashare il backup che avevo.
Grazie