Finally, remote works properly.
Can be download here for ferguson u5pvr: https://images.mynonpublic.com…index.php?open=ferguson4k
or here for dinobot 4kse https://images.mynonpublic.com…ndex.php?open=dinobot4kse
1_0_1_13EF_5DC_13E_820000_0_0_0_20240421191736.jpg1_0_1_13EF_5DC_13E_820000_0_0_0_20240421191708.jpg1_0_1_13EF_5DC_13E_820000_0_0_0_20240421191615.jpg
Thats firmware, you need driver too. You need to find proper kernel-modules for this card.
But to be honest RT8192CU are not the best wifi dongle for DM800 better use one with chipset RT5370. More stable IMHO.
I wrote it last time. DM800HD doesn't have wifi installed by default, everything should be done manually. You should buy wifi dongle, install drivers and set up receiver.
This one DM_800_OpenPli 7.2_AU_ssl.84D_piterfree or this one openpli 7.2 sim 2.01 ssl84d dm800 20200508 are the most stable
language only english, if you change language before you update right files from po.zip it will hang.
This system, it's old linux. You have to buy right USB Wifi, you have to know what module you should download, you have to download right module for this receiver (mips procesor, old kernel) and install with ipkg installer than activate with modprobe and ifconfig. Thats all.
But honestly. If you're asking about it, you're probably only wasting your time trying. Sorry.
I'm almost sure it was DVB-S radio or DVB-T audio. SF8008 cannot decode DAB and DAB+. Also it doesn't scan frequency other than DVB-T2 and DVB-S2.
What? Are you talking about Octagon SF8008?
Yes indeed, telnet has no password ftp is dreambox but openwebif works not.
If I try to enter openwebif using firefox or chrome, it only shows error message.
What is the password?
Display MoreOpenPli 7.3 dm800 sim2.01 ssl8D_piterfree
2 sat 13/19
oscam-11719
label = TVSAT
ClearMem
FlashBackupTo
EPGImport
NGsetting
tvManager
MountManager
This one is not working for me DM800 with SIM 2.01
if you use the one from september 16th it will work
i don't have this file
I have two notices, the good one and the bad one.
The good news: it works, display works (need to replace LCD skin with the older one, receiver thinks that it has VFD display what is not true), python3 works, network works and oscam works.
Bad news: original remote doesn't work (have to use openwebif or android phone), DVB-S2 tuner also doesn't work.
This firmware OpenDroid 7.3 - 11.11.23 cannot be use :(
currently 6.4, but I try 7.3 tomorrow
Python 3 and front display works!
Setting the boot to e2 in the tv app just reboots it to the stuck e2 option, requiring power off and on to get started again. I've tried ver. 6.3 6.4 and 6.5 on various usb drives, as well as the different usb ports including the white one in front.
Now I see what you are doing wrong, you haven't installed E2 but you try to run it. First install E2 - green button during start, USB drive with properly unpacked files from OpenATV archive in front white USB port, should show UPDT on display and update process on screen. If it is installed then it could start. E2 will be installed to flash memory not USB or SD. This receiver has internal flash memory prepared for E2 (1GB).
You cannot eliminate Android from this receiver. But you can install OpenATV on internal partition (1GB) ,use shared memory and forget about android.
Try everything one more time: In Live Channels setup "Use Linux" and "Use E2 should" be enabled. Latest firmware should be installed (I have compilation 2019-12-06), green button should proceed OpenATV installation. Use OpenATV 6.4 or OpenATV 6.5 or OpenNFR. Don't use OpenATV 7.0 or higher it won't work.
Yes, this one is stable and possible newest firmware.
But first you have to update SSL84B to SSL84D with file attached to pinned thread, than without reboot install this firmware and again without reboot install SSL84D bootloader from 1st step.
It doesn't start. I think this image should be patched to Ferrari otherwise it will not start.
No CA found, probably image should be patched to Ferrari SIM.
I have only DM800HD with ferrari 88F right now. I will check DM800 with sim201 next week.
