This is so much beautiful skin please work on it
Posts by Kimoo1987
-
-
Dear Master, I have installed this skin in VTI. The installation is fine, but after applying the skin, there is no picon show in the info. Referance pictures attached
-
*** Error: package script DEBIAN/preinst is not executable
*** Error: package script DEBIAN/postinst is not executable
ipkg-build: Please fix the above errors and try again.
Dear Master G
i am facing this error
-
Actualizar la barra de información V4.1
Amigos para los interesados tengo esta última versión donde se modificaron los siguientes datos.
info nonbre satélite
información ram
info códec Audio Video
pip de datos, sid video
Crush on 4k channels.
Open atv 6.3
-
You can download levi's addon (in the forum), you will find in it multicam manager and configuration/Keys updater.. hope it can help you.
Already try nothing happens
-
-
download the config files from the first page and you will find sites in CCcam.cfg with (#) ,then remove it
and click save then reboot restart NCam;
;
Ok Thanks samur i check
-
/etc/tuxbox/config/CCcam.cfg file
there is no site available in cccam.cfg fileUpdate ...
Ncam V11.4
Code
Display More-New (Exclusive) feature on Ncam *(Searching, Fetching, Reading and running Free C: line server from net) -Small fix for (lg) detection -Fixed unode_id (...) -Fix prevent buffer overflow -Fix cl->reader->cacheex.maxhop_lg > max never used -Need PIN on 092F and 091F caid's fixed -Updated aio -patch for common bugs reported by scan-build -fix typos move debug logoutput to debug -small fix for ecm-whitelist -Updated: Android stapi, CW type -small correction (do not have the same user and pass)
The ncam support now just some sites which give free c: line (Beta Test)
So You can find it inside /etc/tuxbox/config/CCcam.cfg file
All sites are disable (default settings) If you Enable and site just remove # from the beginning of the line the restart ncam
All files download links from first post
-
Thanks Admin, and Mohammed_OS for file..
now at file section of forum
Dear friends, since the file (Oscam ) is not in .ipk format, how do I go about installing it ..
The Guys at purE2 image are swift in updating the Oscam.. nice work ... Stay safe!!
Kimoo1987 .Dear friend,I have gone through openpli, openatv,nfr,Egami,vix and finally settled for purE2 image..so far some pv working.. maybe I need to work harder... you can also try the purE2 image...
Ok dear i try
-
Experts i need help
PVU can't autoroll on oscam
Is there any way to fix this issue..
I tried hard to fix but still couldn't succeed..
If anyone know the method please share
-
oscam PVU and Biss cannot auto roll from log time i tried hard to fix this issue but problem still exist
see attached my oscam configuration and where i did mistake
-
Kimoo1987 make sure you have the correct permissions on the files with the error "permission denied" as 755.
Dear Master G now i get following error please see below log
-
Dear Sir, please check below error
Codekaleem@kaleem-Inspiron-5567:~/ipkg-utils$ make install cp ipkg-build ipkg-deb-unbuild ipkg-unbuild ipkg-compare-versions ipkg-upload /usr/local/bin cp: cannot create regular file '/usr/local/bin/ipkg-build': Permission denied cp: cannot create regular file '/usr/local/bin/ipkg-deb-unbuild': Permission denied cp: cannot create regular file '/usr/local/bin/ipkg-unbuild': Permission denied cp: cannot create regular file '/usr/local/bin/ipkg-compare-versions': Permission denied cp: cannot create regular file '/usr/local/bin/ipkg-upload': Permission denied make: *** [Makefile:14: install] Error 1
can i use it in ubuntu
if yes please share commands
How to Build ipk on ubuntu:
- Extract attachment
- FTP ipkg-utils folder to any folder. For example purposes lets use root.
- Run this in putty/telnet/terminal:
cd /root/ipkg-utils/
make
make install
- FTP to /usr/local/bin and chmod 755 all ipkg script files
- FTP to /root/ipkg-utils/ and send over the package you want to pack then run ipkg-build package
- To unpack ipk run ipkg-unbuild package.ipk
-
can i use it in ubuntu
if yes please share commands
How to Build ipk on ubuntu:
- Extract attachment
- FTP ipkg-utils folder to any folder. For example purposes lets use root.
- Run this in putty/telnet/terminal:
cd /root/ipkg-utils/
make
make install
- FTP to /usr/local/bin and chmod 755 all ipkg script files
- FTP to /root/ipkg-utils/ and send over the package you want to pack then run ipkg-build package
- To unpack ipk run ipkg-unbuild package.ipk
Thank you so much master g i try and let you know
-
Hello.
I also use my own bash script to create .ipk / .deb packages. If anyone is interested, you can find the script on my github here:
https://github.com/s3n0/e2scri…by_s3n0_for_ProjectXYZ.sh
The problem is mainly the functionality of the "ar" tool used for final combining files into .ipk / .deb package.
Unfortunately, in most Enigma firmware, the "ar" tool is included in Busybox only as a very simple tool (with missing features). For example, in OpenPLi-7, Busybox is currently in v1.24.1. The lightweight version of "ar" in this Busybox does not support the file combining argument (ar -r as for example) .
Newer Busybox v1.29.2, which is already in OpenATV 6.3 firmware, already supports this argument (ar -r). However, it is still a lightweight "ar" version.
For this purpose it is possible to copy the alternative binary "ar" or the alternative complete newer Busybox (also as a binary, for a specific chipset). The busybox is located in the "/bin" directory and the "ar" tool is located in the "/usr/bin" directory. In both cases, as usually the sym-link link is used in most Enigma (the "ar" tool is called from Busybox and not directly as a binary file). I don't recommend overwriting "/bin/busybox*" files due to possible compatibility issues in some firmwares. Conversely, you can override the "/usr/bin/ar" tool (if you have the right binary file for your chipset!). Remember to set the attributes after copying ... for example:
chmod 755 /bin/busybox_ or for example chmod 755 /usr/lib/libbfd-2.25-system.so /usr/bin/ar_.
Calling busybox commands is very easy, for example:
busybox ar --help
busybox ls -l /tmp
Or if you add another alternative busybox for your chipset, for example as the file "/bin/busybox_":
busybox_ ls /etc
/bin/busybox_ ls -al /etc
Busybox download for all architectures (open the "defconfig-multiarch-musl" directory):
https://busybox.net/downloads/binaries/
Busybox 1.31.0:
https://busybox.net/downloads/…defconfig-multiarch-musl/
"ar" for mipsel (standalone version):
"ar" for arm (not standalone version - attached a library file for the "/usr/lib" directory!):
can i use it in ubuntu
if yes please share commands
-
1-Alwasy use (enigma1969) softcam.key files
2-Don't forget to set correct value of in ncam.confg
3-In attach config files + softcams.key from some friend and he said Auto update wroks without any problem as screenshot show
Test this config files also
Dear Fairbird extended cw api only for E2 devices... And my vu+ working fine with au PVU and BISS...
Problem is in my android device... Like icone iron pro...
Any ways i test your softcam and let you know
Hello,
For IRON Pro here is the working settings:
ncam.conf:
# ncam.conf generated automatically by NCAM OpenVision
# Read more: https://forum.openvision.tech/index.php
[global]
logfile = /tmp/ncam.log
maxlogsize = 1024
waitforcards_extra_delay = 100
preferlocalcards = 1
readerrestartseconds = 3
block_same_ip = 0
block_same_name = 0
ecmfmt = P: c:p:s:d:i: #ECM_L:l #CW=w HOP:j
disablecrccws_only_for = 0500:030B00,032830,032920,032940,042820,043330,050F00,051900,051A00,051A10,051A20,051A30,051A40;1811:003311,000000,000007;1813:000068;1863:003342,003343;1883:003311;1818:00006C;1819:00006D;1856:000000;1861:000000;1867:000000;186C:000000;183E:000000;1882:000000;1884:000000;1886:000000;0940:000000;093E:000000;09C4:000000;098C:000000;098D:000000;0E00:000000;1708:000000;1709:000000;0100:00006A,00006C,00006D,003311
#cccam_cfg_enabled = 0
cccam_cfg_repetitions_forced = 1
cccam_cfg_reconnect_delay = 90
cccam_cfg_reconnect_attempts = 10
[cache]
[streamrelay]
stream_relay_enabled = 0
stream_emm_enabled = 0
group = 1,2,3,4,5,6,7,8,9,10,64
[dvbapi]
enabled = 1
au = 1
pmt_mode = 5
request_mode = 1
delayer = 60
user = user1
[webif]
httpport = 8888
httpallowed = 127.0.0.1,0.0.0.0-255.255.255.255
httputf8 = 0
ncam.user:
# ncam.user generated automatically by NCAM OpenVision
# Read more: https://forum.openvision.tech/index.php
[account]
user = user1
au = 1
group = 1,2,3,4,5,6,7,8,9,10,64
ncam.server
# ncam.server generated automatically by NCAM OpenVision
# Read more: https://forum.openvision.tech/index.php
[reader]
label = SoftCam
protocol = emu
device = emulator
disablecrccws_only_for = 0E00:000000
caid = 0500,0604,0E00,1010,1801,2600,2602,2610
detect = cd
ident = 0500:000000,007400,007800,021110;0604:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000
[reader]
label = smartcard
protocol = stapi
device = 000:001
detect = cd
group = 7
ncam.dvbapi:
S: stapi1 pmt0_0.tmp
S: stapi1 pmt0_1.tmp
S: stapi1 pmt0_2.tmp
S: stapi1 pmt0_3.tmp
S: stapi1 pmt0_4.tmp
S: stapi1 pmt0_5.tmp
S: stapi1 pmt0_6.tmp
S: stapi1 pmt0_7.tmp
S: stapi1 pmt0_8.tmp
S: stapi1 pmt0_9.tmp
S: stapi1 pmt1_0.tmp
S: stapi1 pmt1_1.tmp
S: stapi1 pmt1_2.tmp
S: stapi1 pmt1_3.tmp
S: stapi1 pmt1_4.tmp
S: stapi1 pmt1_5.tmp
S: stapi1 pmt1_6.tmp
S: stapi1 pmt1_7.tmp
S: stapi1 pmt1_8.tmp
S: stapi1 pmt1_9.tmp
S: stapi1 pmt2_0.tmp
S: stapi1 pmt2_1.tmp
S: stapi1 pmt2_2.tmp
S: stapi1 pmt2_3.tmp
S: stapi1 pmt2_4.tmp
S: stapi1 pmt2_5.tmp
S: stapi1 pmt2_6.tmp
S: stapi1 pmt2_7.tmp
S: stapi1 pmt2_8.tmp
S: stapi1 pmt2_9.tmp
S: stapi1 pmt3_0.tmp
S: stapi1 pmt3_1.tmp
S: stapi1 pmt3_2.tmp
S: stapi1 pmt3_3.tmp
S: stapi1 pmt3_4.tmp
S: stapi1 pmt3_5.tmp
S: stapi1 pmt3_6.tmp
S: stapi1 pmt3_7.tmp
S: stapi1 pmt3_8.tmp
S: stapi1 pmt3_9.tmp
S: stapi1 pmt4_0.tmp
S: stapi1 pmt4_1.tmp
S: stapi1 pmt4_2.tmp
S: stapi1 pmt4_3.tmp
S: stapi1 pmt4_4.tmp
S: stapi1 pmt4_5.tmp
S: stapi1 pmt4_6.tmp
S: stapi1 pmt4_7.tmp
S: stapi1 pmt4_8.tmp
S: stapi1 pmt4_9.tmp
###################################
M: 1819:00006D 0100:00006D
M: 1813:000068 0100:000068
###Priority#####
P: 0100:000068
P: 0100:000068:12C2 #CANAL+ SPORT 3 HD
P: 0100:000068:12C3 #CANAL+ SPORT 4 HD
P: 0100:00006A
P: 0100:00006C
P: 0100:00006D
P: 0100:003311
P: 0500:030B00
P: 0500:030B00:2F71 #NRJ 12
#P: 0500:032830
#P: 0500:032920
#P: 0500:032940
P: 0500:042820
#P: 0500:043330
P: 0500:050800
P: 0500:050810
P: 0500:051A10
P: 0500:051A20
P: 0500:051A30
P: 0500:051A40
#P: 0500:051900
#P: 0500:051910
P: 0500:060200
P: 0500:060210
P: 0648:000000
P: 1708:000000
#P: 1709:000000
#P: 170A:000000
#P: 170B:000000
P: 1800:000000
P: 1802:000000
P: 1803:000000
P: 1810:000000
#P: 1811:003311
P: 1813:000000
P: 1813:000068
P: 1815:000000
#P: 1817:000000
#P: 1817:00006A
#P: 1818:000000
#P: 1818:00006C
#P: 1819:000000
P: 1819:00006D
P: 1830:000000
P: 1843:000000
#P: 1856:000000
P: 1861:000000
#P: 1863:003342
#P: 1863:003343
#P: 1867:000000
#P: 186C:000000
P: 1880:000000
P: 1882:000000
#P: 1883:003311
P: 1884:000000
P: 1884:000000:116F
P: 1886:000000
P: 183D:000000
#P: 183E:000000
#P: 186A:000000
P: 0B00:000000
P: 0B00:000000:0084
P: 0B00:000000:007A
P: 0B01:000000
P: 0B02:000000
P: 0B1C:000000
P: 0B1D:000000
P: 0D95:000000
P: 0D95:000004
P: 0D95:000010
P: 0D96:000000
P: 0D96:000004
P: 0D96:000010
P: 0D97:000000
P: 0D97:000004
P: 0D97:000010
P: 0D98:000000
P: 0D98:000004
P: 0D98:000010
P: 0940:000000
P: 093E:000000
P: 09C4:000000
#P: 098C:000000
P: 098C:000000:0228
P: 098C:000000:0229
#P: 098D:000000
P: 098D:000000:0228
P: 098D:000000:0229
#P: 0919:000000
#P: 09CD:000000
#P: 093B:000000
P: 2600:000000
P: 0E00:000000
P: 1010:000000
##
I: 170A:000000
I: 170B:000000
I: 0919:000000
I: 09CD:000000
I: 093B:000000
I: 0500:032A00
For the two parameters "Wi socket id = -1" && "API for extended CWs = 2" are not printed into the file ncam.conf,i don't know why?;
it seems to be like this:
[dvbapi]
enabled = 1
au = 1
pmt_mode = 5
request_mode = 1
delayer = 60
user = user1
Wi socket id = -1
API for extended CWs = 2
and if you want to test a version compiled by me, see Attachments;
;
everything working fine only autoroll issue still exist (biss and pvu)
-
1-Alwasy use (enigma1969) softcam.key files
2-Don't forget to set correct value of in ncam.confg
3-In attach config files + softcams.key from some friend and he said Auto update wroks without any problem as screenshot show
Test this config files also
Dear Fairbird extended cw api only for E2 devices... And my vu+ working fine with au PVU and BISS...
Problem is in my android device... Like icone iron pro...
Any ways i test your softcam and let you know
Hello,
For IRON Pro here is the working settings:
ncam.conf:
# ncam.conf generated automatically by NCAM OpenVision
# Read more: https://forum.openvision.tech/index.php
[global]
logfile = /tmp/ncam.log
maxlogsize = 1024
waitforcards_extra_delay = 100
preferlocalcards = 1
readerrestartseconds = 3
block_same_ip = 0
block_same_name = 0
ecmfmt = P: c:p:s:d:i: #ECM_L:l #CW=w HOP:j
disablecrccws_only_for = 0500:030B00,032830,032920,032940,042820,043330,050F00,051900,051A00,051A10,051A20,051A30,051A40;1811:003311,000000,000007;1813:000068;1863:003342,003343;1883:003311;1818:00006C;1819:00006D;1856:000000;1861:000000;1867:000000;186C:000000;183E:000000;1882:000000;1884:000000;1886:000000;0940:000000;093E:000000;09C4:000000;098C:000000;098D:000000;0E00:000000;1708:000000;1709:000000;0100:00006A,00006C,00006D,003311
#cccam_cfg_enabled = 0
cccam_cfg_repetitions_forced = 1
cccam_cfg_reconnect_delay = 90
cccam_cfg_reconnect_attempts = 10
[cache]
[streamrelay]
stream_relay_enabled = 0
stream_emm_enabled = 0
group = 1,2,3,4,5,6,7,8,9,10,64
[dvbapi]
enabled = 1
au = 1
pmt_mode = 5
request_mode = 1
delayer = 60
user = user1
[webif]
httpport = 8888
httpallowed = 127.0.0.1,0.0.0.0-255.255.255.255
httputf8 = 0
ncam.user:
# ncam.user generated automatically by NCAM OpenVision
# Read more: https://forum.openvision.tech/index.php
[account]
user = user1
au = 1
group = 1,2,3,4,5,6,7,8,9,10,64
ncam.server
# ncam.server generated automatically by NCAM OpenVision
# Read more: https://forum.openvision.tech/index.php
[reader]
label = SoftCam
protocol = emu
device = emulator
disablecrccws_only_for = 0E00:000000
caid = 0500,0604,0E00,1010,1801,2600,2602,2610
detect = cd
ident = 0500:000000,007400,007800,021110;0604:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000
[reader]
label = smartcard
protocol = stapi
device = 000:001
detect = cd
group = 7
ncam.dvbapi:
S: stapi1 pmt0_0.tmp
S: stapi1 pmt0_1.tmp
S: stapi1 pmt0_2.tmp
S: stapi1 pmt0_3.tmp
S: stapi1 pmt0_4.tmp
S: stapi1 pmt0_5.tmp
S: stapi1 pmt0_6.tmp
S: stapi1 pmt0_7.tmp
S: stapi1 pmt0_8.tmp
S: stapi1 pmt0_9.tmp
S: stapi1 pmt1_0.tmp
S: stapi1 pmt1_1.tmp
S: stapi1 pmt1_2.tmp
S: stapi1 pmt1_3.tmp
S: stapi1 pmt1_4.tmp
S: stapi1 pmt1_5.tmp
S: stapi1 pmt1_6.tmp
S: stapi1 pmt1_7.tmp
S: stapi1 pmt1_8.tmp
S: stapi1 pmt1_9.tmp
S: stapi1 pmt2_0.tmp
S: stapi1 pmt2_1.tmp
S: stapi1 pmt2_2.tmp
S: stapi1 pmt2_3.tmp
S: stapi1 pmt2_4.tmp
S: stapi1 pmt2_5.tmp
S: stapi1 pmt2_6.tmp
S: stapi1 pmt2_7.tmp
S: stapi1 pmt2_8.tmp
S: stapi1 pmt2_9.tmp
S: stapi1 pmt3_0.tmp
S: stapi1 pmt3_1.tmp
S: stapi1 pmt3_2.tmp
S: stapi1 pmt3_3.tmp
S: stapi1 pmt3_4.tmp
S: stapi1 pmt3_5.tmp
S: stapi1 pmt3_6.tmp
S: stapi1 pmt3_7.tmp
S: stapi1 pmt3_8.tmp
S: stapi1 pmt3_9.tmp
S: stapi1 pmt4_0.tmp
S: stapi1 pmt4_1.tmp
S: stapi1 pmt4_2.tmp
S: stapi1 pmt4_3.tmp
S: stapi1 pmt4_4.tmp
S: stapi1 pmt4_5.tmp
S: stapi1 pmt4_6.tmp
S: stapi1 pmt4_7.tmp
S: stapi1 pmt4_8.tmp
S: stapi1 pmt4_9.tmp
###################################
M: 1819:00006D 0100:00006D
M: 1813:000068 0100:000068
###Priority#####
P: 0100:000068
P: 0100:000068:12C2 #CANAL+ SPORT 3 HD
P: 0100:000068:12C3 #CANAL+ SPORT 4 HD
P: 0100:00006A
P: 0100:00006C
P: 0100:00006D
P: 0100:003311
P: 0500:030B00
P: 0500:030B00:2F71 #NRJ 12
#P: 0500:032830
#P: 0500:032920
#P: 0500:032940
P: 0500:042820
#P: 0500:043330
P: 0500:050800
P: 0500:050810
P: 0500:051A10
P: 0500:051A20
P: 0500:051A30
P: 0500:051A40
#P: 0500:051900
#P: 0500:051910
P: 0500:060200
P: 0500:060210
P: 0648:000000
P: 1708:000000
#P: 1709:000000
#P: 170A:000000
#P: 170B:000000
P: 1800:000000
P: 1802:000000
P: 1803:000000
P: 1810:000000
#P: 1811:003311
P: 1813:000000
P: 1813:000068
P: 1815:000000
#P: 1817:000000
#P: 1817:00006A
#P: 1818:000000
#P: 1818:00006C
#P: 1819:000000
P: 1819:00006D
P: 1830:000000
P: 1843:000000
#P: 1856:000000
P: 1861:000000
#P: 1863:003342
#P: 1863:003343
#P: 1867:000000
#P: 186C:000000
P: 1880:000000
P: 1882:000000
#P: 1883:003311
P: 1884:000000
P: 1884:000000:116F
P: 1886:000000
P: 183D:000000
#P: 183E:000000
#P: 186A:000000
P: 0B00:000000
P: 0B00:000000:0084
P: 0B00:000000:007A
P: 0B01:000000
P: 0B02:000000
P: 0B1C:000000
P: 0B1D:000000
P: 0D95:000000
P: 0D95:000004
P: 0D95:000010
P: 0D96:000000
P: 0D96:000004
P: 0D96:000010
P: 0D97:000000
P: 0D97:000004
P: 0D97:000010
P: 0D98:000000
P: 0D98:000004
P: 0D98:000010
P: 0940:000000
P: 093E:000000
P: 09C4:000000
#P: 098C:000000
P: 098C:000000:0228
P: 098C:000000:0229
#P: 098D:000000
P: 098D:000000:0228
P: 098D:000000:0229
#P: 0919:000000
#P: 09CD:000000
#P: 093B:000000
P: 2600:000000
P: 0E00:000000
P: 1010:000000
##
I: 170A:000000
I: 170B:000000
I: 0919:000000
I: 09CD:000000
I: 093B:000000
I: 0500:032A00
For the two parameters "Wi socket id = -1" && "API for extended CWs = 2" are not printed into the file ncam.conf,i don't know why?;
it seems to be like this:
[dvbapi]
enabled = 1
au = 1
pmt_mode = 5
request_mode = 1
delayer = 60
user = user1
Wi socket id = -1
API for extended CWs = 2
and if you want to test a version compiled by me, see Attachments;
;
Thanks samur for explanation i must test your compiled NCam & your configuration and let you know the status soon.
and i have a question please confirm with these configurations auto biss and pvu working in your box with softcam that you provide in previous post... -
1-Alwasy use (enigma1969) softcam.key files
2-Don't forget to set correct value of in ncam.confg
3-In attach config files + softcams.key from some friend and he said Auto update wroks without any problem as screenshot show
Test this config files also
Dear Fairbird extended cw api only for E2 devices... And my vu+ working fine with au PVU and BISS...
Problem is in my android device... Like icone iron pro...
Any ways i test your softcam and let you know
-
Assalam O Alikum
Dear Brother Fairbird i am facing issue in NCAM auto update PowerVU and biss key....
feed Biss key cannot pick and also PowerVU not update every time i need to put manual key in my Softcam...
can you please help me to fix this issue i upload my Softcam in attachment please figure out where is problem..
Thanks in advance
-
Dear Expert team i need help to fix bellow error...
please help out
Thanks in advance
Quote+-------------------------------------------------------------------------------
| OSCam ver: 1.20_svn rev: 11585-798 target: armv7a-unknown-linux-android24-stapi
| Tools:
| CROSS = /home/kaleem/opt/s3/support/toolchains/android_nougat_arm/bin/arm-linux-androideabi-
| CC = /home/kaleem/opt/s3/support/toolchains/android_nougat_arm/bin/arm-linux-androideabi-gcc
| Settings:
| CONF_DIR = /data/plugin/oscam
| CC_OPTS = -O0 -ggdb -pipe -ffunction-sections -fdata-sections -march=armv7-a -mtune=cortex-a9 -mfloat-abi=softfp -mfpu=vfpv3-d16 -DANDROID -D__ANDROID_API__=24 -fpic -fno-addrsig -ffunction-sections -fdata-sections -funwind-tables -fstack-protector-strong -no-canonical-prefixes -Wno-invalid-command-line-argument -Wno-unused-command-line-argument
| CC_WARN = -W -Wall -Wshadow -Wredundant-decls -Wstrict-prototypes -Wold-style-definition
| CFLAGS = -fexpensive-optimizations -DWITH_STAPI=1
| LDFLAGS = -Wl,--gc-sections -DWITH_STAPI=1
| LIBS = /home/kaleem/opt/s3/support/stapi/libwi.a -lm -ldl
| UseFlags = USE_STAPI=1
| Config:
| Addons : WEBIF WEBIF_LIVELOG WEBIF_JQUERY HAVE_DVBAPI READ_SDT_CHARSETS IRDETO_GUESSING CS_ANTICASC WITH_DEBUG MODULE_MONITOR WITH_LB CS_CACHEEX CW_CYCLE_CHECK WITH_EMU WITH_SOFTCAM
| Protocols: CAMD35 CAMD35_TCP NEWCAMD CCCAM CCCSHARE GBOX SCAM CONSTCW
| Readers : NAGRA NAGRA_MERLIN IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD DRE TONGFANG BULCRYPT GRIFFIN DGCRYPT
| CardRdrs : PHOENIX INTERNAL STAPI STINGER
| Compiler : Android (6454773 based on r365631c2) clang version 9.0.8 (https://android.googlesource.com/toolchain/llvm-project 98c855489587874b2a325e7a516b99d838599c6f) (based on LLVM 9.0.8svn)
| Config : build/armv7a-unknown-linux-android24-stapi/config.mak
| Binary : /home/kaleem/opt/s3/support/binaries/oscam-svn11585-android_nougat_arm-webif-dvbapi-emu798-upx
+-------------------------------------------------------------------------------
HOSTCC webif/pages_gen
GEN webif/pages.c
GEN Compressed 458240 template bytes into 184836 bytes. 273404 saved bytes (59.66%).
CC cscrypt/aes.c
CC cscrypt/bn_add.c
CC cscrypt/bn_asm.c
CC cscrypt/bn_ctx.c
CC cscrypt/bn_div.c
CC cscrypt/bn_exp.c
CC cscrypt/bn_mul.c
CC cscrypt/bn_lib.c
CC cscrypt/bn_print.c
CC cscrypt/bn_shift.c
CC cscrypt/bn_sqr.c
CC cscrypt/bn_word.c
CC cscrypt/mem.c
CC cscrypt/des.c
CC cscrypt/i_cbc.c
CC cscrypt/i_ecb.c
CC cscrypt/i_skey.c
CC cscrypt/md5.c
CC cscrypt/sha1.c
CC cscrypt/rc6.c
CC cscrypt/mdc2.c
CC cscrypt/fast_aes.c
CC cscrypt/sha256.c
CC csctapi/atr.c
CC csctapi/io_serial.c
CC csctapi/icc_async.c
CC csctapi/protocol_t0.c
CC csctapi/protocol_t1.c
CC csctapi/ifd_phoenix.c
CC csctapi/ifd_sci.c
CC minilzo/minilzo.c
CC csctapi/ifd_stinger.c
CC csctapi/ifd_stapi.c
CC module-anticasc.c
CC module-camd35.c
CC module-camd35-cacheex.c
CC module-cacheex.c
CC module-cccam-cacheex.c
CC module-cccam.c
CC module-cccshare.c
CC module-constcw.c
CC module-emulator.c
CC module-emulator-cryptoworks.c
CC module-emulator-streamserver.c
CC module-emulator-irdeto.c
CC module-emulator-osemu.c
CC module-emulator-nagravision.c
CC module-emulator-biss.c
CC module-emulator-director.c
CC module-emulator-powervu.c
CC module-emulator-viaccess.c
CC module-dvbapi-stapi.c
CC ffdecsa/ffdecsa.c
CC module-csp.c
CC module-cw-cycle-check.c
CC module-dvbapi-chancache.c
CC module-gbox-helper.c
CC module-dvbapi.c
module-dvbapi-stapi.c:97:4: warning: implicit declaration of function 'pthread_cancel' is invalid in C99 [-Wimplicit-function-declaration]
pthread_cancel(dev_list[i].thread);
^
module-dvbapi-stapi.cCC module-gbox-sms.c
:479:2: warning: implicit declaration of function 'pthread_setcanceltype' is invalid in C99 [-Wimplicit-function-declaration]
pthread_setcanceltype(PTHREAD_CANCEL_ASYNCHRONOUS, NULL);
^
module-dvbapi-stapi.c:479:24: error: use of undeclared identifier 'PTHREAD_CANCEL_ASYNCHRONOUS'
pthread_setcanceltype(PTHREAD_CANCEL_ASYNCHRONOUS, NULL);
^
2 warnings and 1 error generated.
make[1]: *** [Makefile:452: build/armv7a-unknown-linux-android24-stapi/module-dvbapi-stapi.o] Error 1
make[1]: *** Waiting for unfinished jobs....
CC module-gbox.cCC module-gbox-remm.c
CC module-gbox-cards.c
CC module-ird-guess.c
CC module-newcamd-des.c
CC module-monitor.c
CC module-newcamd.c
module-dvbapi.cCC module-scam.c
:1112:37: warning: the value of the size argument in 'strncat' is too large, might lead to a buffer overflow [-Wstrncat-size]
strncat(device_path, device_path2, sizeof(device_path) - strlen(device_path));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
module-dvbapi.c:1112:37: note: change the argument to be the free space in the destination buffer minus the terminating null byte
strncat(device_path, device_path2, sizeof(device_path) - strlen(device_path));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sizeof(device_path) - strlen(device_path) - 1
module-dvbapi.c:1199:39: warning: the value of the size argument in 'strncat' is too large, might lead to a buffer overflow [-Wstrncat-size]
strncat(device_path, device_path2, sizeof(device_path) - strlen(device_path));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
module-dvbapi.c:1199:39: note: change the argument to be the free space in the destination buffer minus the terminating null byte
strncat(device_path, device_path2, sizeof(device_path) - strlen(device_path));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sizeof(device_path) - strlen(device_path) - 1
module-dvbapi.c:1342:38: warning: the value of the size argument in 'strncat' is too large, might lead to a buffer overflow [-Wstrncat-size]
strncat(device_path, device_path2, sizeof(device_path) - strlen(device_path));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
module-dvbapi.c:1342:38: note: change the argument to be the free space in the destination buffer minus the terminating null byte
strncat(device_path, device_path2, sizeof(device_path) - strlen(device_path));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sizeof(device_path) - strlen(device_path) - 1
module-dvbapi.c:1362:38: warning: the value of the size argument in 'strncat' is too large, might lead to a buffer overflow [-Wstrncat-size]
strncat(device_path, device_path2, sizeof(device_path) - strlen(device_path));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
module-dvbapi.c:1362:38: note: change the argument to be the free space in the destination buffer minus the terminating null byte
strncat(device_path, device_path2, sizeof(device_path) - strlen(device_path));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sizeof(device_path) - strlen(device_path) - 1
4 warnings generated.
make: *** [Makefile:408: all] Error 2| TIME > [ 0 min(s) 3 secs ]