Posts by Goryna

Quote from toysoft

./backup_original.sh /hdd

But also try to download again the backup script file, as I reposted a new one few hours after,

login as: root
root@192.168.1.183's password:
root@dm7020hd:~# cd /hdd/dreambox
root@dm7020hd:/hdd/dreambox# ./backup_original.sh /hdd
rm: can't remove '/home/root/.ash_history': No such file or directory
rm: can't remove '/hdd/*.nfo': No such file or directory
rm: can't remove '/hdd/secondstage.bin': No such file or directory
OK : Folder name specified,
./backup_original.sh: line 116: [: '--truncate': integer expression expected


***********************
* dm7020hd FOUND *
***********************


---------------------------------------------------------------
rm: can't remove '/hdd/swapfile_backup': No such file or directory
Creating swapfile on /hdd with 128MB
Setting up swapspace version 1, size = 134213632 bytes
UUID=daead0a7-8e08-4b19-822f-4b473759c1c9
---------------------------------------------------------------
Swapfile activated
---------------------------------------------------------------
***********************************************
* Started BackUp at: 14:28:59          *
***********************************************
Building image with original Secondstage SSL
rm: can't remove '/hdd/secondstage.bin': No such file or directory
UBIFS Filesystem ...
Relax 5 or 6 minutes until finishing
---------------------

Backup-2024-03-31@14.28.56-SSL-.nfi 124.2Mb

Ok!!! I will not try to restore this created image.

Quote from piterfree

creates the file as seen in the photo...but the weight of the file remains at 0...it doesn't work, something or file is missing in the soft.

IMG_20240330_135516.jpg

./backup_original.sh /hdd ???

Quote from toysoft

Strange... as the file generated is in /hdd and the name start by "Backup..." not OpenPLi... Are you using the right scripts ? You must copy all the folder and files, be sure all are set to 755 naturally... and run it going into the folder, cd /hdd/dreambox and sending command ./backup.sh /hdd

Perfectly working here with DM800HDse, DM500HD, DM8000HD and DM7020HDv1.

TS

root@dm7020hd:/hdd/dreambox# ./backup.sh /hdd
rm: can't remove '/home/root/.ash_history': No such file or directory
rm: can't remove '/hdd/*.nfo': No such file or directory
rm: can't remove '/hdd/swapfile_backup': Operation not permitted
rm: can't remove '/hdd/secondstage.bin': No such file or directory
OK : Folder name specified,
./backup.sh: line 116: [: '--truncate': integer expression expected

***********************
* dm7020hd FOUND *
***********************

---------------------------------------------------------------
rm: can't remove '/hdd/swapfile_backup': Operation not permitted
Creating swapfile on /hdd with 128MB
----------------------------------------
Found swapfile
----------------------------------------
***********************************************
* Started BackUp at: 21:54:24          *
***********************************************
Grabbing from Flash the secondstage built-in the image
UBIFS Filesystem ...
Relax 5 or 6 minutes until finishing
---------------------

The box reboots. I get two files on the HDD:

root.img 121.5Mb

root.ubi 117.4Mb

the file $IMAGEINFO-$DATE-SSL-$VSND.nfi is not created

Quote from toysoft

and run the backup.sh script ("./backup.sh /hdd").

How to run the script, through which plugin? This is my first time encountering this method.

Does not work. If I hadn't checked, I wouldn't have written. Check it out for yourself if you don't believe it.

Quote from toysoft

For the backup tools, there is few around, just be sure it works for the DM7020HD.

There are not many of them - Dflash and backupsuite plugins. But they do not work on your firmware. Unfortunately, you do not want to resolve this issue and this is sad.

How can I install this image so that after installation all previous settings are restored? And most importantly, you need to restore the settings of additional plugins that have their own settings (login and password).
Does this image also not have a plugin capable of creating a full system image?

The Dflash and backupsuite plugins do not work on your previous image.

Please advise a suitable replacement for Dflash image openpli-enigma2-8xstar-dm7020hd

Quote from toysoft

For the backup, the usual little scripts for DM500HD/DM800HDse/DM8000 work, I generally do it with command line.

I like this image for its speed and responsiveness.
But nevertheless, I don’t like that it can’t work, it can’t correctly install the standard dFlash archiving plugin that I’m used to.

Can you suggest a working plugin for creating a full system image in NFI format?
Unfortunately, the image also cannot install the generally accepted HD Glass skin of any version.

Quote from toysoft

And now keep a backup of the custom image you built, so you don't have to do the job again !

To save an installed and configured copy of the system, you must have a working system backup plugin.

The dFlash plugin is not installed. Automatic Full Backup plugin does not work. Can you suggest a backup plugin?

The system does not work with the skin that I used constantly in different images - fullhdglass17 which displays the work of Ci+

The biggest mistake in this image and OpenPli images is their inability to work with any HDDs. I installed a new HDD which I read the image but could not format and mount, stopped at 99% I installed OpenATV / formatted the original image and mounted the HDD. Only after this I was able to fully use the HDD in OpenPLi and OpenPLi 8.xStar images.

Thank you toysoft for your help.
I managed to launch the firmware with full functionality by additionally installing ci_plus_helper-openpli8.x_4_all and setting it from its settings to 0:/etc/ciplus/
With two different Smit modules, the firmware cannot access the Device ID. It is necessary to use ci_plus_helper for the channels to work.
Additionally, I think it is necessary to add a blind search module for transponders - Blindscan - to the default image, as well as a backup module for the configured image.

I re-flashed the latest image. Channels are not decoded. Writes - Your host is not fully CI+ compatible

The card is read, but the signal is not decoded.

I tested the module/card immediately after installing a clean image and after applying the plugin (enigma2-plugin-extensions-ci_plus_helper-openpli8.x_4_all.ipk) with complete system reboots. In both cases the result is negative.

The oscam module was disabled immediately after installing the image before scanning the 140E satellite

Module Smit and map on screenshot.

I'm confused by the number of links in this thread. I thought that the openpli-enigma2-8xstar-20231031-dm7020hd_Original image was more recent because of the number indicated in it. Thanks for the mentorship.
As a result, I installed the image for March 2024, the Ci+ module was detected, but the channel, for some reason unknown to me, was not decrypted. The Russian provider HTV+ did not help. Indeed, my box and the Ci+ module work and decrypt the signal on the openatv-6.2 firmware. It’s just that I have to install add-ons on this image myself.
In addition to the latest installed firmware, I installed the latest enigma2-plugin-extensions-ci_plus_helper-openpli8.x_4_all.ipk In the settings I set it to 0: /etc/ciplus/
Channels are also not decoded. What else can you recommend?

Quote from toysoft

Have a nice sunday,

Good mood ruined. Above you provided a link to an image not for the original box that I flashed. I warned you that my box is original.
After restoring the bootloader, I flashed openpli-enigma2-8xstar-20231031-dm7020hd_Original.nfi
Here are the screenshots -

Quote from toysoft

What did I told you ?

That's what I did. There is no result, there is no Ci+ module.

Quote from toysoft

P.S.: Tested also the Viaccess SMIT module with success...

openpli-enigma2-8xstar-20231031-dm7020hd_Original.nfi

The SMIT module on the left is not recognized by the firmware, as I expected.

Quote from toysoft

Patch files : http://openpli8xstar.japhar.ne…nal-Japhar_DM7020HDv1.rar

and after the reboot, ftp to box and replace the bcm driver file in /lib/modules/.../extra by the original one from the patch files.

What is this for me?

What is the difference between the proposed firmwares?

openpli-enigma2-8xstar-dm7020hd.nfi 119,5mb

openpli-enigma2-8xstar-20231031-dm7020hd_Original.nfi 120.9mb

I have the original DM7020HDv1

Quote from toysoft

No... look here, probably you didn't found the menu... or not installed this image.

I don’t have a tab in my menu like you have in the screenshot. Obviously this is due to the fact that you write about two right slots, but in Russia I use the first slot with the SMiT module. I can assume that the firmware does not see the slot with the SMiT module.