user-script oscam delette
sorry, what do you mean?
user-script oscam delette
sorry, what do you mean?
unless i'm looking at the wrong directory, the ipk is still reported as installed :-(
who else from this forum has managed to manually remove the oscam-emu completely (on openpli)? or even better would have the following ipk: enigma2-plugin-softcams-oscam-emu (git1825+c46c72d-r0.0)
thanks
Probably best to then do it manually then mate, if you installed it with an ipk, use 7zip to extract the ipk several times from ipk to .tar to normal file type to see the file structure and where the files have been installed on your box, then go and delete them, then reboot box.
i suspect this would be under /etc/tuxbox/config and delete the oscam-emu folder.
thanks, i shall do so.
thanks for your reply.
re: locked oscam, this is a paid service for a private server that does not appear in the list of installed packages . i cannot add c-lines to it or use the softcam.key, hence i need the oscam emu.
i was previously able to use oscam-emu and oscam - using the autocam set up plug- and this is sth i want to reachieve.
the --force--remove does not seem to work either - it does not even recognised the cmd. this is really odd.
Hi folks,
i'm running OpenPLi 7,2 and when i try to run this cmd in telnet to remove the previously installed oscam-emu, i get this:
would you have any ideas on how to resolve this? i'm not sure what this means (bearing in mind that i'm running a locked oscam in parallele but i never had this in the past).
thanks in advance
Just realized that i omitted to mention an important piece of info - in the past, i was able to open the AFN channels - so that makes me wonder why the rest of the powervu channels dont open (and they never did)
Formuler F4 turbo
Openpli 7.2
Hi,
Please find attached some loglines as well as the softcam.key i'm using.
i really don't get why those channels don't open.
Oscam-emu is correctly installed as I use the autocamsetup plug to switch from oscam to oscam-emu.
The oscam is locked and comes from a script provider.
I'll send a log extract when I get home.
I'll stick to openpli for now.
ok my bad
i'll take note for the box
thanks a lot for your feedback.
No reader for Biss then ?
I can safely remove this section?
[reader]
label = biss
protocol = emu
device = emulator
caid = 2600
detect = cd
ident = 2600:000000
group = 1
and only use?
[reader]
label = emulator
protocol = emu
device = emulator
disablecrccws_only_for = 0E00:000000
caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1
detect = cd
ident = 0500:000000,023800,021110,007400,007800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,007301,001101,002111;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE
emu_datecodedenabled = 0
and yes i'm still on the F4 Turbo
I am still struggling to have the channels - any chance you could ping me a snippet of your emu reader from the oscam.server file ? as well as our oscam.conf?
this is a log extract:
i am surprised to see the key error - when i am using the latest softcam.key file
2020/01/08 18:01:55 045DE817 r (emu) Key not found or invalid: P ****00A8 012020/01/08 18:01:55 045DE817 r (emu) Key not found or invalid: P 0056FFFF 012020/01/08 18:01:55 045DE817 r (emu) ECM failed: Key not found2020/01/08 18:01:55 27470840 c (ecm) dvbapiau (0E00:000000:00A8:1818:0000:0001 #ECM_L:40 #CW=00000000000000000000000000000000 HOP:00): not found (2 ms) by emulator - BETFRED SIS - CISCO 12020/01/08 18:01:56 27470840 c (dvbapi) Demuxer 0 restarting decoding requests after 6 ms with 1 enabled and 0 disabled ecmpids!2020/01/08 18:01:56 27470840 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1818 ANY CHID PMTPID 1430 VPID 00642020/01/08 18:01:56 045DE817 r (emu) Key not found or invalid: P ****00A8 012020/01/08 18:01:56 045DE817 r (emu) Key not found or invalid: P 0056FFFF 012020/01/08 18:01:56 045DE817 r (emu) ECM failed: Key not found2020/01/08 18:01:56 27470840 c (ecm) dvbapiau (0E00:000000:00A8:1818:0000:0001 #ECM_L:40 #CW=00000000000000000000000000000000 HOP:00): not found (2 ms) by emulator - BETFRED SIS - CISCO 12020/01/08 18:01:57 27470840 c (dvbapi) Demuxer 0 restarting decoding requests after 7 ms with 1 enabled and 0 disabled ecmpids!2020/01/08 18:01:57 27470840 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1818 ANY CHID PMTPID 1430 VPID 00642020/01/08 18:01:57 045DE817 r (emu) Key not found or invalid: P ****00A8 012020/01/08 18:01:57 045DE817 r (emu) Key not found or invalid: P 0056FFFF 012020/01/08 18:01:57 045DE817 r (emu) ECM failed: Key not found
Display More
thanks will check that asap and share results.
Hey guys,
I need your help to understand why none of the powervu channels are working - no sound/image (despite the fact that powervu keys are up to date - i use the updated softcam.key by INFORMED®)
I'm on openpli 7.2 with the latest oscam-emu.
All BISS channels are ok though.
here's an extract of the oscam.server related to emu:
[reader]
label = emulator
protocol = emu
device = emulator
disablecrccws_only_for = 0E00:000000
cacheex_maxhop = 1
cacheex_allow_request = 1
caid = 090F,0500,1801,0604,0E00,4AE1,1010,09BE,2600,FFFF
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;0E00:000000,000002;4AE1:000011,000014,0000FE;1010:000000;2600:000000;FFFF:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
auprovid = 000E00
[reader]
label = biss
protocol = emu
device = emulator
caid = 2600
detect = cd
ident = 2600:000000
group = 1
looking at various config linked to similar issues, i can't seen what can be done -
i'm mostly testing the SIS channels on 4.8E.
Let me know if further info is needed to help troubleshoot/
thanks a lot in advance
J/
Actually, found it myself.
For those interested, the file (autocam.conf) is ususally stored on the root of /etc
Hi guys,
I had to reflash my box yesterday and successfully imported all settings except for the autocamsetup plug in (I lost all config set up)
Would anyone of you be able to tell me when the xml file is usually located?
I expected it would have been in the plug-in install directory but it does not seem to be.
Any help would be greatly appreciated.
Thanks in advance.
Not working for me with latest version of ocscam, solo2 and openbh3.1 so something has changed, it worked briefly and then went. I can see keys but no pic or sound.
help
exact same here - with open pli 6.2.
i suspect that a new oscam-emu should be installed but which one?
Which oscam emu should be used for openpli 6.2 again?
Thanks
try this one
Thanks but it does not seem to be compatible for openpli 6.2 as once (supposedly) installed it does not appear in the settings nor in the install plugin lists.
I also tried the latest mips (enigma2-softcams-oscam-all-images_11.505-emu-r791-arm+mips_all.ipk) but with same result.
The current oscam emu served with the image does not open sound/vision despite the fact that the emu /keys is correctly recognised (as per previous comment
#540) - current installed version is enigma2-plugin-softcams-oscam-emu (git1642+4d47f69-r0.0)
thanks
Which oscam emu should be used for openpli 6.2 again?
Thanks
thanks
somehow i removed the old oscam emu, rebooted the box update the package lists, and installed enigma2-plugin-softcams-oscam-emu (git1642+4d47f69-r0.0) from the image plugin list, cleaned the old keys from the softcam.key, ran a key update and it worked as a treat!