Posts by junger

Re: lost entitlements, hi does the reader block emm codes look correct correct please

[reader]
label = skyuk
protocol = internal
device = /dev/sci0
caid = 0963
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
saveemm-u = 1
saveemm-s = 1

Hi all

I have lost a few film channels, including Premier, Premier +1 and showcase,
Sky Sports 4. I have done a autoboquet update but still no joy, anyone know why?
regards
junger

- - - Updated - - -

According to oscam my sly card had 11 entitlements, It used to have 17, so I must have lost 6 entitlements, can anyone explain please

CARDOK
(11 entitlements)

Hoi all, trying to install Autoboquet, followed the sticky, put dvbsnoop and autoboquets in the correct folders, gave dvbsnoop 777 permissions and e2 autoboguets to 755, when I try to run the autoboquet on the box, its starts and then reports dvbsnoop "timed out" and the asks to change to a 28.2e chanel, then fails to put the updated cannels on, anyone help please, I have tried different images and get the same result
Thanks

Thankyou Master G, it was indeed the Oscam.config for the vuduo. Copied the one that you posted (and your instruction), all working now.:59:

I will look at that, thanks

- - - Updated - - -

Quote from junger

I will look at that, thanks

I have tried to set this oscam to oscam up, I cannot see any problem cut the obviously is, spent some time, read up on the Tuts but cannot see the problem, can anyone see what the problem is, both images are Blackhole. ultimo is Oscam snv9842, viewDuo is Oscam 6089, there is no Cccam involved.

Feed Box.(ultimo)

Oscam.config

[global]
nice = -1
WaitForCards = 1
preferlocalcards = 1
logfile = /tmp/oscam.log;stdout
maxlogsize = 256

[newcamd]
port = 10010@0963:000000
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 0

Receiving Box (view+duo)

Oscam.config

[newcamd]
port = 10001@0963:000000
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 0

Feed Box.(ultimo)

Oscam.User

[account]
user = vuduo
pwd = con
group = 1
cccmaxhops = 5
cccreshare = 0

Receiving Box (view+duo)

Oscam.server

[reader]
label = vuduo
protocol = cccam
device = ###.###.#.####,10010 (The Ip of the feed box)
user = vuduo
password = con
inactivitytimeout = 1
group = 1
cccversion = 2.1.2
ccckeepalive = 1

Hi, Changed my BH image for a later one, I am trying to handle my second box using oscam from my first box which hosts the card, I have had it working in the past but now i cannot get it to be recognised, in 8888. my scripts are below, any help would be welcome, thankyou, junger

Ultimo Supply Box

Oscam Config
[global]
nice = -1
WaitForCards = 1
preferlocalcards = 1
logfile = /tmp/oscam.log;stdout
maxlogsize = 256

[cccam]
port = xxxxx
version = 2.1.2
reshare = 1
stealth = 1

[newcamd]
port = xxxxx@0963:000000
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 0

[webif]
HttpPort = 8888
HttpUser = ######
HttpPWD = ########
httptpl = /var/share/oscam/tpl
httpcss = /var/share/oscam/tpl/coolstream-to.css
HttpRefresh = 10
HttpAllowed = 192.168.0.1-192.168.0.250,192.168.1.1-192.168.1.250
HttpReadOnly = 1

[dvbapi]
Enabled = 1
Boxtype = dreambox
User = DVBApi
decodeforever = 1
AU = 1

Ultimo
Oscam User

[account]
user = vuduo
pwd = con
group = 1
cccmaxhops = 5
cccreshare = 0

Vuduo
Oscam Config

[global]
nice = -1
WaitForCards = 1
preferlocalcards = 1
logfile = /tmp/oscam.log;stdout
maxlogsize = 256

[webif]
HttpPort = 8888
HttpUser = #####
HttpPWD = ######
httptpl = /var/share/oscam/tpl
httpcss = /var/share/oscam/tpl/coolstream-to.css
HttpRefresh = 10
HttpAllowed = 192.168.0.1-192.168.0.250,192.168.1.1-192.168.1.250
HttpReadOnly = 1

[dvbapi]
Enabled = 1
Boxtype = dreambox
User = DVBApi
decodeforever = 1
AU = 1

Vuduo

Oscam Server

[reader]
label=xxxxxxxxxxxxxxx
enable=1
protocol=cccam
device=192.168.0.###,12040
user=#####
password=###
cccversion=2.1.2
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccmaxhops=10
ccckeepalive=1
cccwantemu=0

Thanks Stevejo, The card is in another box (not the vu+duo),, as an update, when I point the oscam server(in the vu+duo) at the oscam user(in the ultimo where the card is) and use the ddns address, then the high ecms occur, however if I change the ddns (####.###.net)to the local ip address instead (192.###.###.##) then the ecms drop and are stable. If I remove the entry and insert one of my peers dns entries in the vu+duo oscam server the ecms remain low and stable. complexed I know, but was hoping that someone could explain it to me, Regards, j:54_002:unger

Thanks jim1985, I understand your point, however, I have tried a different box (a borrowed starview, with spiderbox conversion and a dreambox) and they dont do the same freezing on ddns, so it would appear to be unique to te vu+duo. confused. anyone else had this problem?

Thanks sWeRvEr

Well, that is that sorted, Changing from the ddns to the ip address have lowered the ecm's which have come and stayed constant at 106ms. can you please tell me why the ddns shows so high ecm's please

2015/01/29 12:56:29 776032A0 c linuxsatsupport (0963&000000/FFFF/107D/63:D5BAE49AE08E9A6330C834BE722A2679): found (105 ms) by ######.ddns.net - *** Sports 1
2015/01/29 12:56:37 776032A0 c linuxsatsupport (0963&000000/FFFF/107D/63:52F6B5E402EAF74E0FD6295890EE7787): found (105 ms) by ######.ddns.net - *** Sports 1

Ahhh!, My 2nd box is only 12 meters from the 1st box holding the card . it is wired directly to the router (homeplugs), and freezes on premium channels only. I have tried cccam, Oscam and it makes no difference, it still freezes, I have borrowed another box (starview Combo, with Spiderbox Carling Update), that works perfectly on both Cccam and Newcamd Protocal. The image on the Vu+Duo is Blackhole (MasterG UK backup), the CCcam is 2.1.3, the Oscam is v9763. any ideas please?, The Cccam and Oscam were loaded seperatly (not together).

2015/01/29 12:13:16 76A0A858 c linuxsatsupport (0963&000000/FFFF/107D/63:EB1CB80D48E6DDF2B9FC8E350983EF30): timeout (5001 ms) by #######.ddns.net - *** Sports 1
2015/01/29 12:13:16 76A0A858 c linuxsatsupport (0963&000000/FFFF/107D/63:9656B54A9F2AFC6E1170149571CF9466): found (3407 ms) by ###### .ddns.net - *** Sports 1

I have tried to locate this transponder for the QPR United on ghana tv3 game, is it possible to get it?

ok, thanks stevejo, it is the Cccam, 213, have loaded Cccam 230 and its sorted, thanks very much
junger

Quote from stevejo

You must have 2 instances off cccam running on the duo can you see a red 2 next to the user on the main box when you go to the users tab

Thanks Stevejo

So I need to set the oscam app on the main box?, is that right

Regards
junger

Hi all, I have a vu+duo that is directly fed from a share, the shareis from my main box which holds the local card. my peers do not appear to be suffering the freeze.

Main Box
Oscam-svn9842
Blackhole Image

Vu+Duo
Cccam 2,1,3
OpenVix Image, however I reflashed from openTV and both act the same, any ideas?, Thanks

on ip:8888, live log , on the main box. I see the same vu+ share twice next to each other, but there is only one entry in oscam user. confusing, dont know if that has anything to do with it.

I have lost loads of channels from my local card (movies/sports). using svn9842/CCcam-2.1.3. I have posted :8888, any ideas please
OSCam r9842 Timeline Status Pollrefresh no set - Polling disabled
Hide/Reset Reader/User AU Address Port Protocol CAID:SRVID Current Channel LB Value/Reader Login Status
Server 2/2

Hide the Server root root 127#.'.# server 0000:0000 26.10.14
12:35:12 OK
Hide the Server root root 127.0.0.1 0 http 0000:0000 26.10.14
12:35:12 OK
Readers 1/1

Hide the Reader ***UK Restart the Reader ***UK ***UK ON 127.#.#.#.# internal 0963:1841 Sly Digital (UK): Discovery Turbo UK no data 26.10.14
12:35:12 CARDOK
(5 entitlements)
Clients 1/1 (1 with ECM within last 25 seconds)

Hide the User linuxsat Kill the User linuxsat linuxsat OFF 127.#.#.#.# 53665 newcamd (CCcam) 0963:1841 *** Digital (UK): Discovery Turbo UK ***UK (92 ms) 26.10.14
12:35:33 OK

My card clears my peers no problem, I have a share at hop 2, (hop 3 to my peers), they get the programme if I select it on my box, but if I turn over to another programme then that share is lost to my peers, anyone explain that please
Regards
junger

No Problem, Thanks

anyone know why when i enter a vip section I only see the posts that I have started?

Iv'e been asked if I can get sly sports 5 on a DM500s, he has Commando 14.7, can it be added or can I reflash it for him to 15 if that image has sly sports 5 included. Thanks
Junger

wow, thanks