Posts by junger

Yes dreamuser, for reference the oscam/cccam is selected/downloaded in tpanel and configuired in tpanel-softcam, there is no entry in blue-button for the image entry, (I assume this works as cccam handles a cline that way.
When I web info (ip 8888)the card read is correct for 10 secs after softcam restarted then show error.
I have selected different ports in cccam and oscam config due to having my own vu+ultimo, but I port forwarded the additional ports in the router to match.
I might have to take my box down and advise our members that I share with that my box will be down for the test period.Lastly, I will tell my son he needs to join our forum for his advice or my head will be shredded with frustration. lol, thanks for your help mate
hope this helps you to help me, thanks, junger

ok, when i reset the oscam/cccam the web info status shows the reader as "needinit" but within 10 secs it goes to "error" an the progress log shows

2013/01/04 1:08:25 3471 r02 [videoguard2-reader] no boxID available
2013/01/04 1:08:25 3471 r02 card system not supported
2013/01/04 1:08:25 3471 r02 Normal mode failed, reverting to Deprecated Mode
2013/01/04 1:08:26 3471 r02 ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
2013/01/04 1:08:27 3471 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/01/04 1:08:28 3471 r02 [videoguard2-reader] type: VideoGuard B***B - New
2013/01/04 1:08:31 3471 r02 card system not supported
2013/01/04 1:08:31 3471 r02 card initializing error
2013/01/04 1:08:31 3466 s init for all local cards done
2013/01/04 1:08:31 3466 s anti cascading disabled
2013/01/04 1:08:31 3466 s dvbapi: dvbapi disabled
2013/01/04 1:08:45 3466 s client(1) connect from 127.0.0.1 (pid=3499, pipfd=14)
2013/01/04 1:08:45 3499 c01 account 'ó¹ðÌ ðž…ÐÇüD29RŸÀVž¤À(Ä' not found!
2013/01/04 1:08:45 3499 c01 cccam: 2554 failed errno: 0 (Success)
2013/01/04 1:08:45 3499 c01 anonymous disconnected from 127.0.0.1
2013/01/04 1:08:55 3466 s client(1) connect from 127.0.0.1 (pid=3508, pipfd=14)
2013/01/04 1:08:55 3508 c01 account 'o¯ùV*àÓpÅøå”^ýìBSÿ(Ääök$ÞÕþ]§mì!µN' not found!
2013/01/04 1:08:55 3508 c01 cccam: 2554 failed errno: 0 (Success)
2013/01/04 1:08:55 3508 c01 anonymous disconnected from 127.0.0.1
2013/01/04 1:09:05 3466 s client(1) connect from 127.0.0.1 (pid=3514, pipfd=14)
2013/01/04 1:09:05 3514 c01 account '!™(*¢Éè' not found!
2013/01/04 1:09:05 3514 c01 cccam: 2554 failed errno: 0 (Success)
2013/01/04 1:09:05 3514 c01 anonymous disconnected from 127.0.0.1
2013/01/04 1:09:15 3466 s client(1) connect from 127.0.0.1 (pid=3521, pipfd=14)
2013/01/04 1:09:15 3521 c01 account '…"ï³³ Áwf,ìžÁ*6¬¸ö9ÿ(Ääök$ÞÕþ]§mì!µN' not found!
2013/01/04 1:09:15 3521 c01 cccam: 2554 failed errno: 0 (Success)
2013/01/04 1:09:15 3521 c01 anonymous disconnected from 127.0.0.1

Thanks, I will try that mate

I have tried 2 images and get the same card error read, anyone available for teamview please, a little frustrated and going round in circles

when i look at the reader in 8888, i get this

1251 r 2 ***uk 0 0 127.0.0.1 0 intern 03.01.13 16:09:45 00:02:47 0000:0000 00:02:47 ERROR

wuold appreciate any suggestions

Readers 0/1
2BCFF4B0 r 1 ***uk 0 0 127.0.0.1 0 internal 03.01.13 14:26:57 00:00:51 0000:0000 no data 00:00:51 OFF

could this be the problem in the reader?

yes mate works on my vu duo, oscam services?, dont know mate

Hi Senns69
Thanks, I tried the edits, no joy im afraid, what i cannot understand is that the card is seen by the box as seen and the left indicator in blue panel cccam is showing the card as seen, the only thing that I have seen that looks untoward is the following
2013/01/03 14:22:29 2CCFF4B0 c AU enabled for user linuxsat on reader ***uk
2013/01/03 14:23:31 2CCFF4B0 c linuxsat (0963&000000/0EDB/7D:E205): not found (0 ms) (of 1 avail 1)
2013/01/03 14:23:41 2CCFF4B0 c linuxsat (0963&000000/0EDB/7D:6843): not found (0 ms) (of 1 avail 1)
2013/01/03 14:23:49 2CCFF4B0 c linuxsat (0963&000000/0EDB/7D:C0F7): not found (0 ms) (of 1 avail 1)
2013/01/03 14:23:57 2CCFF4B0 c linuxsat (0963&000000/0EDB/7D:00C1): not found (0 ms) (of 1 avail 1)
2013/01/03 14:24:05 2CCFF4B0 c linuxsat (0963&000000/0EDB/7D:62EA): not found (0 ms) (of 1 avail 1)

###########################
###LINUXSAT-SUPPORT.COM####
###########################

[account]
user = linuxsat
here is the oscam user senns69

pwd = support
monlevel = 0
uniq = 0
group = 1
au = ***UK
caid = 0963

thanks

Looking at the oscam log, (8888), is it possible that the reason for the none clearance is "cannot AU on this port", seems unusual. anyone?

thanks mate i will look at that, and report back

I have changed to cccam 2.1.3.
###########################
###LINUXSAT-SUPPORT.COM####
###########################
SERVER LISTEN PORT : ######
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME : root
WEBINFO PASSWORD : #######
TELNETINFO USERNAME : root
TELNETINFO PASSWORD : ######
TELNETINFO LISTEN PORT : ##000
WEBINFO LISTEN PORT : ##001
ZAP OSD TIME : 0
OSD USERNAME : root
OSD PASSWORD : ########
OSD PORT : 80
SHOW TIMING : yes
DEBUG : no
NEWCAMD CONF : no
#DISABLE EMM : yes
#EXTRA EMM LEVEL : yes
SHOW EXTENEDED CLIENT INFO : yes
MINI OSD : no
#MINIMUM DOWNHOPS: 1
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
PROVIDERINFO FILE : /var/etc/CCcam.providers
CAID PRIO FILE : /var/etc/CCcam.prio
LOG WARNINGS : /tmp/warnings.txt
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
#STATIC CW FILE : /var/keys/constant.cw
#BOXKEY: /dev/sci0
#SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000

N: 127.0.0.1 1###### linuxsat support 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

oscam cannot get the box to clear the sly card

config =

[global]
nice = -1
logfile = /dev/null
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1

[webif]
httpport = 8888
httpuser = root
httppwd = #######
httprefresh = 30
httptpl = /etc/tuxbox/config/
httphideidleclients = 0
httpallowed = 192.168.###.### - 255.255.255.255
debug = 255

[newcamd]
key = 0102030405060708091011121314
port = #####@0963:0000

server=

[reader]
label = ***UK
protocol = internal
device = /dev/sci0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
group = 1
caid = 0963

All the symptoms are as though it will work, all the ccam info works, the card is seen, but 8888 reports the following:
2013/01/02 22:29:23 2AAC6850 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2) i***** guessing not loaded
2013/01/02 22:29:23 2AAC6850 s monitor: disabled
2013/01/02 22:29:23 2AAC6850 s camd33: disabled
2013/01/02 22:29:23 2AAC6850 s camd35: disabled
2013/01/02 22:29:23 2AAC6850 s cs378x: disabled
2013/01/02 22:29:23 2AAC6850 s newcamd: initialized (fd=6, port=10040, crypted)
2013/01/02 22:29:23 2AAC6850 s CAID: 0963
2013/01/02 22:29:23 2AAC6850 s provid #0: 000000
2013/01/02 22:29:23 2AAC6850 s cccam: disabled
2013/01/02 22:29:23 2AAC6850 s radegast: disabled
2013/01/02 22:29:23 2AAC6850 s http thread started
2013/01/02 22:29:23 2AAC6850 s creating thread for device /dev/sci0
2013/01/02 22:29:23 2AAC6850 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/01/02 22:29:23 2AAC6850 s waiting for local card init
2013/01/02 22:29:23 2B4FF4B0 h HTTP Server listening on port 8888
2013/01/02 22:29:23 2BCFF4B0 r reader thread started (thread=2BCFF4B0, label=***uk, device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2013/01/02 22:29:27 2AAC6850 s init for all local cards done
2013/01/02 22:29:27 2AAC6850 s anti cascading disabled
2013/01/02 22:29:28 2CD514B0 c client connected to 10040 port
2013/01/02 22:29:28 2CD514B0 c encrypted newcamd:10040-client 127.0.0.1 granted (linuxsat, au=***uk)
2013/01/02 22:29:28 2CD514B0 c user linuxsat authenticated successfully (CCcam)
2013/01/02 22:29:28 2CD514B0 c AU wont be used on this port -> disable AU
2013/01/02 22:29:30 2CD514B0 c linuxsat (0963&000000/0EDA/67:724C): rejected user ident (121 ms) (of 0 avail 0) (no card support 0963:000000)
2013/01/02 22:29:38 2CD514B0 c linuxsat (0963&000000/0EDA/67:BFD0): rejected user ident (120 ms) (of 0 avail 0) (no card support 0963:000000)
2013/01/02 22:29:40 2CD514B0 c linuxsat (0963&000000/0EEE/67:88CA): rejected user ident (120 ms) (of 0 avail 0) (no card support 0963:000000)
2013/01/02 22:29:46 2CD514B0 c linuxsat (0963&000000/0EEE/67:5142): rejected user ident (121 ms) (of 0 avail 0) (no card support 0963:000000)
2013/01/02 22:29:53 2CD514B0 c linuxsat (0963&000000/0EEE/67:9BA7): rejected user ident (120 ms) (of 0 avail 0) (no card support 0963:000000)

any ideas please?

dream elite image dm800hd se clone, below is my oscam files, oscam v6611 Ccam 213, the card location shows green (27.0.0.10000) but that is through the softcam within tpanel not dream elite blue button.
Yet the card still does not clear, help would be appreciated

Oscam config
[global]
nice = -1
logfile = /dev/null
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1

[webif]
httpport = 8888
httpuser = root
httppwd = ########
httprefresh = 5
httphideidleclients = 0
httpallowed = ip address - 255.255.255.255
debug = 255

[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000

Oscam Server

reader]
label = ***uk
enable = 1
protocol = internal
device = /dev/sci0
services =
caid = 0963
detect = cd
mhz = 500
cardmhz = 357
ident =
group = 1
emmcache = 1,3,2
ecmcache = 1
blockemm-unknown = 1
blockemm-g = 1
lb_weight = 100

Oscam User

[account]
user = linuxsat
pwd = support
monlevel = 0
uniq = 0
group = 1
au = ***UK
caid = 0963

i will try that and let you know
thanks
junger

2013/01/02 17:10:13 1702 r02 Cannot open device: /dev/sci0
2013/01/02 17:10:16 1697 s init for all local cards done
2013/01/02 17:10:16 1697 s anti cascading disabled
2013/01/02 17:10:16 1697 s dvbapi: dvbapi disabled
2013/01/02 17:10:18 1697 s client(1) connect from 127.0.0.1 (pid=1706, pipfd=13)
2013/01/02 17:10:18 1706 c01 encrypted newcamd:10000-client 127.0.0.1 granted (linuxsat, au=***uk)
2013/01/02 17:10:18 1706 c01 user linuxsat authenticated successfully (CCcam)
2013/01/02 17:10:18 1706 c01 AU wont be used on this port -> disable AU
2013/01/02 17:10:32 1697 s client(2) connect from 127.0.0.1 (pid=1721, pipfd=14)
2013/01/02 17:10:32 1721 c02 encrypted newcamd:10000-client 127.0.0.1 granted (linuxsat, au=***uk)
2013/01/02 17:10:32 1721 c02 user linuxsat authenticated successfully (CCcam)
2013/01/02 17:10:32 1721 c02 AU wont be used on this port -> disable AU
2013/01/02 17:10:32 1721 c02 Connection closed to client
2013/01/02 17:10:32 1721 c02 linuxsat disconnected from 127.0.0.1
2013/01/02 17:10:50 1706 c01 linuxsat (0963&000000/0EDA/67:DF7F): rejected user ident (120 ms)
2013/01/02 17:10:56 1706 c01 linuxsat (0963&000000/0EDA/67:9333): rejected user ident (120 ms)
2013/01/02 17:11:01 1706 c01 linuxsat (0963&000000/0EDA/67:4D7F): rejected user ident (121 ms)
2013/01/02 17:11:08 1706 c01 linuxsat (0963&000000/0EDA/67:7AA1): rejected user ident (120 ms)
2013/01/02 17:11:13 1702 r02 ERROR opening device /dev/sci0
2013/01/02 17:11:13 1702 r02 Cannot open device: /dev/sci0
2013/01/02 17:11:16 1706 c01 linuxsat (0963&000000/0EDA/67:9EA0): rejected user ident (120 ms)
2013/01/02 17:11:24 1706 c01 linuxsat (0963&000000/0EDA/67:56AF): rejected user ident (120 ms)
2013/01/02 17:11:32 1706 c01 linuxsat (0963&000000/0EDA/67:1D81): rejected user ident (120 ms)
2013/01/02 17:11:40 1706 c01 linuxsat (0963&000000/0EDA/67:F53F): rejected user ident (122 ms)
2013/01/02 17:11:48 1706 c01 linuxsat (0963&000000/0EDA/67:D150): rejected user ident (120 ms)
2013/01/02 17:11:56 1706 c01 linuxsat (0963&000000/0EDA/67:53B3): rejected user ident (120 ms)
2013/01/02 17:12:04 1706 c01 linuxsat (0963&000000/0EDA/67:8F29): rejected user ident (120 ms)

this is what is read at ip:8888, at least the oscam has turned green, but still not clearing the card, any ideas most welcome

Quote from master G

Oscam is configured for CCcam client, so if CCcam is stopped your card will not clear..

Have you installed oscam and CCcam separately, or is this a combo EMU ?

Like senns69 said, show us the oscam log..

I started cccam but though oscam sees the card it does not go green, I cannot do ip:8888 its is not found

Quote from senns69

what log says???
did you check a newer version of oscam??

hi mate
I have tried a few, some dont work with dream elite, others dont recognise the card, maybe an immage change, but the dream elite image looks good

Hi all
I am just trying to get this box to read a card locally, but i cannot get the card to clear,

Box = Dreambox clone 800hd se
image = Dream Elite v. 2.53
CCCam = 213 (stopped)
Oscam = Oscam_r4396

Osam Config

[global]
nice = -1
logfile = /dev/null
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1

[webif]
httpport = 8888
httpuser = root
httppwd = #########
httprefresh = 30
httptpl = /etc/tuxbox/config/
httphideidleclients = 0
httpallowed = 192.168.0.1 - 255.255.255.0
debug = 255

[newcamd]
key = 0102030405060708091011121314
port = 10020@0963:000000

Oscam Server

[reader]
label = ***UK
protocol = internal
device = /dev/sci0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
group = 1
caid = 0963

This is my lads card and he wants to share with me and a few others (just so that he can look at other satelites), is the problem because I already have my vu+ ultimo running on the same network?

thanks
junger

made up with the ultimo, everything running well, just tried 1 channel (1.3) off tspanel plugins and it installed ok, when i tried to use it, it comes up with the listings, but when i select one to watch I get the green screen, anyone know a better version for my combination please?

DM 800hd, tried dreamup (but it cannot commubicate to box), when I web flash its ok, strange, anyone any ideas please